Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Irving, TX
Gate Installation in Irving means working around two very different housing eras. The older south Irving neighborhoods from the 1950s through 1970s carry steel and wood gates on lots where expansive clay has spent decades shifting posts out of square. A few miles north, Las Colinas and the 75038/75039 corridor bring newer automatic driveway gates, ornamental iron, and HOA-governed communities that expect code-compliant work. Whether you need a new automatic gate installed or an aging one replaced, call Bastion Gate Repair at (866) 321-6117 for a free estimate and we’ll tell you exactly what your property needs.
Why Irving Homes Are Different
Irving’s gate work divides along a line most contractors never mention. In the south side ZIPs of 75060, 75061, and 75062, the stock is mid-century single family: chain-link frames, wood-rail gates, and steel posts set in North Texas clay before anyone understood what that soil does over fifty summers. Expansive clay heaves and contracts with every wet-dry cycle, and the result is gates that bind, drag, or lean regardless of new hinges. We’ve pulled posts in south Irving that had drifted more than two inches from plumb since they were set.
In Las Colinas and the 75038/75039 corridor, the same complaint usually means something else entirely. Master-planned communities and gated office parks run automatic operators, loop detectors, and access control boards that fail from heat and power surges long before the steel or iron shows wear. Irving’s severe spring hail and straight-line wind events also tear at gate frames and knock operators out of alignment. A gate company here has to speak both languages: access-control compliance on one side of the city, aging residential hardware on the other. Bastion Gate Repair has served Irving since 2012 and we diagnose the system, not just the symptom.
Styles & brands we work with
Our Main Irving Services
Most Irving calls to us fall into two buckets: a gate that won’t move properly, and an electric system that quit responding. Here’s how each works in Irving specifically.
Gate Repair in Irving
Repair work in Irving runs from cracked welds on ornamental iron in Las Colinas to rotted wood-rail sections and sagging steel frames in the older south side. The clay movement in Irving shifts posts and hinges, so we always check the foundation before touching the hardware. In storm season, bent frames and impact damage from hail or straight-line wind send gates out of track and strain operators. We work on virtually every major gate brand and repair what’s actually broken rather than defaulting to replacements. See our full Gate Repair in Irving page.
Electric Gate Repair in Irving
Electric gate failures in Irving follow a pattern: operator boards burn out after long Texas summers, loop detectors quit sensing, and remotes or keypads lose programming after storms. Las Colinas commercial properties especially can’t afford an entrance that won’t close, and HOA communities need access control working for every resident. We handle logic boards, sensors, loop detectors, and access control components across LiftMaster, FAAC, BFT, Viking, and the rest. The full breakdown is on our Electric Gate Repair in Irving page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Irving
Gate Installation in Irving means matching the structure to the soil, the operator to the climate, and the finish to the neighborhood. South Irving’s older lots often need new posts set deeper with proper concrete and drainage before a new gate hangs straight. Las Colinas and the 75038/75039 planned communities usually call for automatic driveway gates tied into access control systems, built to HOA spec and installed without disrupting the rest of the property. We handle the full Gate Installation process from the first measurement to final programming, for residential and commercial properties across the city.
Automatic Gate Installation
Signs you need it
A manual gate on a property that sees daily vehicle traffic wastes time and leaves your perimeter uncontrolled every time it’s left open.
What it costs in Irving
Automatic gate installation in Irving typically runs $2,800 to $9,500 depending on gate size, operator type, and access control components.
How we do it
We measure the opening and grade, set posts or footings on stable ground, mount the gate and operator, run power and safety loops, then program remotes and keypads before testing the full cycle.
Driveway Gate Installation
Signs you need it
An existing driveway gate that sags, sticks, or no longer matches the home’s security needs often costs more to keep patching than to replace properly.
What it costs in Irving
Driveway gate installation in Irving generally lands between $3,000 and $10,000 for materials and labor, with automatic operators and custom iron pushing toward the higher end.
How we do it
We set posts below the clay movement line, hang the gate with adjustable hinges, square it to the opening, and add the operator and safety features when the job includes automation.
What Gate Installation Costs in Irving
| Item | Typical range in Irving |
|---|---|
| Single swing gate with operator | $2,800 – $6,500 |
| Double swing gate with operator | $4,500 – $9,500 |
| Driveway gate, custom steel or iron | $3,000 – $10,000 |
Do I need a permit to install a gate in Irving?
Most residential gate installations in Irving follow city setback and height rules, and HOA-governed communities in Las Colinas usually require design approval first. We can check the requirements for your specific address and handle the paperwork where needed.
How long does a new gate installation take in Irving?
Standard single driveway gate installations in Irving take one to two days once materials are on site. Custom iron or fully automated systems with access control can run three to five days depending on fabrication and programming. Call (866) 321-6117 for a schedule based on your job.
Brands We Service in Irving
We carry parts and service boards for LiftMaster, FAAC, BFT, and Mighty Mule, among others. Stocking common boards, loops, and safety edges locally means we’re not waiting on shipping when your Irving gate is down. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Irving, TX
| Service | Typical range in Irving |
|---|---|
| Automatic gate installation | $2,800 – $9,500 |
| Driveway gate installation | $3,000 – $10,000 |
| Gate operator replacement | $850 – $2,600 |
| Control board replacement | $350 – $900 |
| Electric gate motor repair | $250 – $900 |
| Gate hinge, wheel, or roller repair | $150 – $550 |
| Gate sensor or safety loop repair | $200 – $600 |
| Track and post realignment | $400 – $1,500 |
Irving’s two big price drivers are old posts on shifted clay and automation retrofits on gates never built to carry an operator. Both add labor before any new hardware goes in. Every job is quoted and agreed before any work starts, so you know the number in advance.
Neighborhoods We Serve in Irving
We run calls across all of Irving, from the Las Colinas corridor to the older south Irving grid. Most residential jobs in Irving can be reached the same day we diagnose the issue, with commercial and access-control calls scheduled around your property’s staff and traffic.
- Las Colinas
- Valley Ranch
- Heritage District
- University Hills
- Plymouth Park
Service Area – Cities Near Irving
Bastion Gate Repair covers Irving and the surrounding Dallas County cities. We also serve Farmers Branch, TX, University Park, TX, Cockrell Hill, TX, and Dallas, TX for gate repair, electric gate work, and new installations.
Serving Irving, TX — Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Irving
Most Irving repair calls get a same-day or next-day visit depending on your ZIP and the issue. Commercial gates in Las Colinas that won’t close are prioritized as security events. Call (866) 321-6117 and we’ll give you a straight answer on timing.
Many Las Colinas and master-planned communities in Irving require design approval before a new driveway gate goes in, especially automatic ones visible from the street. We work with your HOA’s requirements and can supply the specs they’ll ask for.
What ZIP codes in Irving do you cover?
We cover all Irving ZIP codes: 75014, 75015, 75016, and 75017, plus the surrounding cities listed above. If you’re not sure whether your property is in range, call (866) 321-6117 and we’ll confirm.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Irving Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Mark Meyer"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Erin Hoffman"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Allen Wong