Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Dallas, TX
Gate installation in Dallas means working on a Century-old wrought-iron piece in Swiss Avenue one day and a modern horizontal-cedar automatic driveway gate in the M Streets the next. The housing stock demands it. Bastion Gate Repair has served Dallas since 2012, and we’ve built our whole approach around that split: old enough to know how a blacksmith-built hinge should move, current enough to wire a LiftMaster smart opener into a home automation system. Call (866) 321-6117 when you need a gate installed, repaired, or automated correctly.
Why Dallas Homes Are Different
Dallas’s gate market splits between two very different animals. The historic districts – Swiss Avenue, Munger Place, and the older stretches of Lakewood – hold onto original wrought-iron and wood gates from the 1920s and 1930s. Those gates have decorative scrollwork, hand-forged hinges, and often sit under a preservation review. Changing a hinge on one can trigger an approval process, so the repair itself has to be right the first time. On the other side, the infill growth in Lakewood, the M Streets, and around Vickery Meadow has brought a wave of modern horizontal-plank cedar and steel gates, most of them automated. Those systems need a different skill set entirely: logic boards, safety loops, wireless keypads, and app integration.
The climate works against both types. Dallas summers push 100 degrees with humidity that swells wood gates in July, then freezes arrive in January and split whatever swelled. Clay soil doesn’t help either. It expands and contracts through the wet-dry cycle, shifting posts and pulling gates out of alignment seasonally. A gate that tracks true in May can be dragging by August and binding by February. That’s the reality of owning a gate in Dallas, and it’s why our technicians are trained for both the traditional ironwork and the modern automation side.
Styles & brands we work with
Our Main Dallas Services
Most calls we get in Dallas come down to two problems: a gate that won’t move freely, or a gate that won’t respond to its opener. Here’s what each service covers in this city.
Gate Repair in Dallas
Gate repair in Dallas hinges on the building’s age. A 1920s Swiss Avenue wrought-iron gate that sags and drags usually needs hinge work – maybe a post reset if the clay soil has shifted, maybe a weld repair on the scrollwork itself. A modern privacy gate in the M Streets dragging on its track more likely has a wheel or bracket failure. We inspect the gate from post to latch, tell you what’s actually wrong, and quote the fix before any work starts. On a 1920s Tudor, we’ll flag preservation guidelines before touching anything. See the full breakdown on our Gate Repair in Dallas page.
Electric Gate Repair in Dallas
Electric gate repair in Dallas means diagnosing the whole system, not just swapping a board. We trace power to the operator, check the safety loops at the driveway, test remotes and keypads, and watch how the gate drives under load. Texas sun bakes operator housings, humidity corrodes wire connections, and lightning around Dallas storms fries control boards. We service LiftMaster, FAAC, BFT, and Mighty Mule operators – both residential and commercial. You’ll find the full detail on our Electric Gate Repair in Dallas page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Dallas
Gate installation in Dallas has to account for the soil under the posts and the style of the street around them. Clay soil in Dallas shifts with the seasons, so post depth and concrete mix matter more here than they would in rockier ground. And in neighborhoods like Swiss Avenue, the gate has to match the house: a modern aluminum insert in a 1925 Spanish Colonial reads as wrong to anyone who knows the street. In Lakewood or the M Streets, the job usually runs the other direction – a new horizontal-cedar driveway gate with a Mighty Mule or LiftMaster opener, a keypad, and a safety loop wired before the sod goes back. The work begins with a free measurement and a written price, never a guess. More detail lives on our Gate Installation hub.
Automatic Gate Installation
Signs you need it
You’re still getting out of the car to open the gate by hand, or a swinging gate has hit the fence one too many times because someone pushed it past its stop.
What it costs in Dallas
Automatic gate installation in Dallas typically runs between $8,000 and $25,000, depending on the gate material, length, and the operator system you choose.
How we do it
We measure the driveway, set new steel posts deep enough for Dallas clay, hang the gate, then wire the operator, safety loops, and any keypads or intercoms – and we walk you through running it before we leave.
Electric Gate Installation
Signs you need it
You have a manual gate in good shape but want keypad or smartphone access, or a new gate is going in and you want automation on day one.
What it costs in Dallas
Electric gate installation in Dallas typically falls between $8,000 and $25,000 when a new gate is part of the project; retrofitting an existing manual gate to automation runs lower because the gate structure itself stays.
How we do it
We match the operator to the gate’s weight and usage cycle, mount it on a reinforced post, then run conduit for power and safety edges or loops so the gate closes the way a gate should in a Dallas storm.
Driveway Gate Installation
Signs you need it
The existing driveway opening has no gate at all, or a rusted, warped one is past any honest repair.
What it costs in Dallas
Driveway gate installation in Dallas typically runs from $8,000 to $25,000 all-in, though a long custom steel drive gate at a Lakewood estate can push toward the top of that range and beyond.
How we do it
We survey the driveway grade for drainage, set posts plumb and below the clay movement zone, hang the gate, then handle automation, keypads, and whatever access control your property needs.
Sliding Gate Installation
Signs you need it
Your driveway slopes, or the front setback is tight enough that a swing gate would clip the car or the sidewalk and a sliding gate makes better use of the space.
What it costs in Dallas
Sliding gate installation in Dallas typically ranges from $8,500 to $20,000 because the cantilever or tracked steel frame, rollers, and motorized drive add cost over a basic swing panel.
How we do it
We pour a level track bed or set a cantilever frame, hang the gate, then wire the operator and safety loops so a sliding panel stops and reverses correctly every cycle.
What Gate Installation Costs in Dallas
| Item | Typical range in Dallas |
|---|---|
| Full automatic gate system, installed | $8,000 – $25,000 |
| Sliding gate with operator | $8,500 – $20,000 |
| Driveway gate (manual or automated) | $8,000 – $25,000 |
How long does gate installation take in Dallas?
Most Dallas gate installations run three to five working days, from the first post being set through final operator wiring. Custom wrought-iron or preservation-scope projects can run longer, especially if a historic review waits in the queue.
Call (866) 321-6117 for an exact timeline on your gate – estimates are free.
Do I need a permit to install a gate in Dallas?
That depends on the property. In Dallas, electrical work, new masonry columns, or a gate in a historic district like Swiss Avenue can require permits or approval before work starts. We help Dallas homeowners sort out what’s needed and we don’t start until it’s clear. Call (866) 321-6117 to check your specific address.
Brands We Service in Dallas
We work on LiftMaster, FAAC, BFT, and Mighty Mule – the brands most common in Dallas driveways and commercial entrances – and source logic boards, remotes, and limit components for local callbacks. Because our Dallas techs stock across those lines, most control-board swaps on a LiftMaster or a BFT happen on a single visit instead of a second trip. See our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Dallas, TX
| Service | Typical range in Dallas |
|---|---|
| Gate repair (realignment, hinge work) | $150 – $500 |
| Electric gate repair (board, sensor, opener) | $150 – $850 |
| Automatic gate installation | $8,000 – $25,000 |
| Electric gate installation | $8,000 – $25,000 |
| Driveway gate installation | $8,000 – $25,000 |
| Sliding gate installation | $8,500 – $20,000 |
| Gate operator replacement | $95 – $450 |
| Safety loop or photo eye replacement | $150 – $600 |
| Control board, receiver, or transformer repair | $100 – $500 |
| Track or roller replacement | $200 – $600 |
Dallas pushes prices up when clay soil has moved a post out of plumb and the job turns into a dig-and-reset, or when a historic district requires a preservation review before materials can be chosen. The price we quote is the price you pay – agreed with you before any work starts.
Neighborhoods We Serve in Dallas
We run calls across Dallas every week, from the 1920s Tudor gates of Swiss Avenue and Munger Place to the newer automated gates in Lakewood, the M Streets, and Vickery Meadow. Our Dallas response for most repair calls is same day or next morning.
- Swiss Avenue Historic District
- Munger Place
- Lakewood
- The M Streets
- Vickery Meadow
Service Area – Cities Near Dallas
Bastion Gate Repair also handles gate jobs in the towns that wrap around Dallas. We work in Highland Park, TX and University Park, TX, where older estate gates sit on clay soil, in Richardson, TX where 1960s ranch homes now carry modern automatic gates, and in Cockrell Hill, TX for residential and light-commercial gate work. If your property sits anywhere in this ring, one call covers it.
Serving Dallas, TX — Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Dallas
Most Dallas repair calls get a same-day or next-morning visit, and many jobs are finished on that first appointment because our techs carry common LiftMaster, FAAC, BFT, and Mighty Mule parts in the truck. Call (866) 321-6117 and we’ll tell you what day we can have a tech at your gate.
Many do. HOAs in Lakewood, the M Streets, and gated communities around Dallas often write specific materials, colors, and height limits into the covenants, and a replacement that doesn’t match can bring a violation notice. We check the written requirements before recommending a gate so you’re not paying twice. Call (866) 321-6117 for an estimate that accounts for your HOA’s standards.
We cover all of Dallas, including 75242, 75201, 75202, and 75203, plus the close-in cities like Highland Park and University Park. If you’re unsure whether we serve your address, call (866) 321-6117 and we’ll confirm on the spot.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Dallas Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Erin Hoffman"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Allen Wong"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Andre Coleman