Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Duncanville, TX
Gate installation in Duncanville usually means replacing or adding to a property built between the late 1960s and early 1990s, and that changes how the work gets done. The original welded steel and ornamental iron drive gates across ZIP codes 75116 and 75137 are now hitting their 40-year mark, and many have been re-welded two or three times by previous owners. When we install a new gate here, we’re often correcting what the Blackland Prairie clay did to the old posts: heaving, shifting, and cracking shallow concrete over decades. Call (866) 321-6117 if you’re deciding between repairing what’s there or starting over with a system built for this soil and this climate.
Why Duncanville Homes Are Different
Most of what we see in Duncanville was built when a driveway gate meant a welded steel frame hung on posts set in whatever concrete was handy. That worked until the North Texas clay started its seasonal shrink-swell cycle. Summers here dry the soil and pull it away from post footings. Spring storms saturate it and push everything back, a few millimeters at a time, year after year. The result is a gate that leans, drags, or binds at the latch. In the older subdivisions off Cedar Ridge and Main Street, we regularly find drive gates that have been re-welded two or three times, with mixed galvanized and painted steel that rusts faster at the weld seams after every rainy spring. Spring storms also bring hail and high wind that bend lighter frames and fatigue operator arms. Duncanville sits directly in that weather pattern, so repainting alone never solves the problem. The metal has to be evaluated the way a structural fatigue problem gets evaluated: at the welds, at the hinge points, and at the post bases, not just at the visible rust spots.
Styles & brands we work with
Our Main Duncanville Services
Most Duncanville homeowners call us for one of two reasons: a gate that’s sagging or jammed, or an electric opener that’s stopped responding. Both are covered below, each with its own dedicated Duncanville page.
Gate Repair in Duncanville
Repair work in Duncanville is heavily weighted toward 1970s and 1980s welded steel and ornamental iron gates whose rusted hinge welds and sagging posts are now at their fatigue point. We re-set posts in clay-stable footings, repair or replace hinge hardware, straighten frames that Dallas weather has bent, and restore latches and track alignment. If your gate scrapes the driveway or won’t close without lifting, that’s the job.Gate Repair in Duncanville covers the full repair scope, and what those repairs typically cost here.
Electric Gate Repair in Duncanville
Electric gate failures in Duncanville follow a pattern: older operators with capacitors worn out by years of 100-degree summers, safety sensors knocked out of alignment by wind, and circuit boards shorted by lightning or power surges. We diagnose the system rather than defaulting to a replacement: we test the logic board, the capacitor, the limit switches, and the receiver before we quote anything. Electric Gate Repair in Duncanville walks through the failure modes and what it costs to fix them here.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Duncanville
Automatic gate installation in Duncanville follows a pattern we see across the 75116 and 75137 ZIP codes. The original gate may be a custom iron frame that’s been re-welded more times than anyone can count, and the posts are often set in shallow concrete that’s cracked and shifted with the Blackland Prairie clay. Installing a new gate here means founding the posts deeper, choosing steel and coatings that hold up to the spring storm cycle, and matching a motor to the gate’s true weight and duty cycle. Because we install electric and automated systems as part of the core job, not as a callback, you get one crew, one warranty path, and no finger-pointing between a gate company and an electrician. Our staff handles LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule openers, which means the operator gets matched to the gate, not the other way around. Full details on our installation scope are at Gate Installation.
Automatic Gate Installation
Signs you need it
Your current gate is manual or the existing opener trips, grinds, or fails to move the gate in one direction.
What it costs in Duncanville
Automatic gate installation in Duncanville typically ranges from $3,200 to $8,500, depending on gate material, length, and opener type.
How we do it
We survey the post condition and soil, pull permits if the city requires them, set new posts where needed, mount the gate and operator, wire the controls, and test full open and close cycles before we call the job done.
Driveway Gate Installation
Signs you need it
Your driveway gate sags, the posts lean, or you’ve repaired it twice and it’s still not square.
What it costs in Duncanville
Driveway gate installation in Duncanville typically runs between $2,800 and $7,500, with automated options at the higher end.
How we do it
We remove the old gate and hardware, set posts in concrete that works with Duncanville clay, hang the new gate true to the post line, and adjust the latch and stops for a clean close.
Sliding Gate Installation
Signs you need it
Your driveway slopes or you want a gate that doesn’t swing out over the sidewalk or street.
What it costs in Duncanville
Sliding gate installation in Duncanville typically runs from $3,800 to $8,200, including track, rollers, and a motor appropriate for the gate’s weight.
How we do it
We set the track on a level bed, mount the rollers and gate frame, install the operator and safety edges, and test the slide path for clearance and speed.
What Gate Installation Costs in Duncanville
| Item | Typical range in Duncanville |
|---|---|
| Basic manual single driveway gate | $2,800 – $4,200 |
| Automated driveway gate (gate + opener) | $3,200 – $8,500 |
| Sliding gate with track and motor | $3,800 – $8,200 |
Do I need a permit for a new gate in Duncanville?
Duncanville may require a permit for a new driveway gate, especially if it’s automated or sits within a setback. We check the current city standards for your address and belt the permit into the written price before any work begins.
How long does a gate installation in Duncanville take?
Most Duncanville installations are one to two days on site, depending on post removal, concrete cure time, and operator wiring. We schedule the work and tell you the timeline before we start, not after.
Brands We Service in Duncanville
We carry parts and diagnostics for the brands Duncanville homes and commercial properties actually run: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We don’t farm out brand-specific work, and we’re not guessing at a control board with a multimeter and a prayer. Our brands page lays out what we cover.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Duncanville, TX
| Service | Typical range in Duncanville |
|---|---|
| Gate repair (weld, hinge, post re-set) | $225 – $600 |
| Electric gate repair (sensor, board, capacitor) | $175 – $750 |
| Operator replacement | $550 – $2,800 |
| Automatic gate installation | $3,200 – $8,500 |
| Driveway gate installation | $2,800 – $7,500 |
| Sliding gate installation | $3,800 – $8,200 |
| Chain-link gate replacement | $350 – $900 |
| Commercial gate repair | $400 – $1,800 |
Duncanville pricing gets pushed up by post replacement when clay heave has cracked the footing, and by operator replacement when the old one is sealed in a housing that has to be re-worked. Every price is quoted and agreed before any work starts, so the number on the invoice doesn’t surprise you.
Neighborhoods We Serve in Duncanville
We work the whole Duncanville footprint, and our consistent dispatch path means you’re not waiting on a crew from 40 miles out. Typical response for repair calls in the city is same-day or next-day, depending on call volume. We regularly serve:
- Older subdivisions off Cedar Ridge and Main Street
- The neighborhoods around Danieldale Road
- West Duncanville near the 75137 line
- The areas east of Cedar Hill Road in 75116
Service Area – Cities Near Duncanville
Bastion Gate Repair started in nearby DeSoto and still keeps the same kind of local response across the whole southwestern Dallas County belt. We cover Duncanville and the surrounding cities with the same crew, the same parts stock, and the same upfront pricing. If you’re just outside Duncanville, we also serve Cockrell Hill, TX, DeSoto, TX, Glenn Heights, TX, and Lancaster, TX.
Serving Duncanville, TX — Our Local Coverage Area
We’re based in the Duncanville area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Duncanville
Most Duncanville repair calls get same-day or next-day service, depending on how early in the day you call and where we already have crews. Automated gate failures that leave the gate open get prioritized, because a gate that won’t close is a security gap, not just an inconvenience.
Some Duncanville subdivisions with HOA covenants require architectural review for new or replacement gates, particularly on the front of the property. We work from your HOA’s written requirements and adjust the finish, style, and placement accordingly. If you’re not sure what your HOA requires, we can help you pull the relevant section from your deed restrictions before you commit to a design.
Yes. We repair and install both residential and commercial gate systems, including larger sliding and barrier operators used at apartment complexes, self-storage facilities, and controlled-access entrances along the commercial corridors. The same brands apply: Viking, Ghost Controls, DoorKing, Elite, and the rest of the line.
If you’re ready for a straight answer on your gate, call (866) 321-6117 for a free estimate. We’ll tell you what the system actually needs, what it costs, and when we can get it done.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Duncanville Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Erin Hoffman"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Allen Wong"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Andre Coleman