Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in University Park, TX
Gate installation in University Park, TX means matching new automated systems to homes built between the 1920s and the latest custom rebuilds, on lots where the gate sits close to the property line and the streetscape matters. We handle the full job: site measure, operator selection, post work, electrical run, and final adjustment. Call (866) 321-6117 for a free measure and written price.
Why University Park Homes Are Different
University Park is a Park Cities enclave of high-value, mostly pre-1950s and rebuild-era custom homes. Driveway and estate gates here are expected to match the architecture and sit close to the property line, so gate work is finish-sensitive and code-sensitive rather than a generic operator swap. Each job usually involves wrought iron, cedar, or custom steel in front of a customer who expects invisible hardware and no visible change to the streetscape.
North Texas blackland clay is the other factor. It shrinks in summer drought and swells after fall rains, so gate posts heave and rack out of plumb. A gate that was square in June can sag by October. Hail and heat also degrade operator housings, photo-eye lenses, and exterior keypads faster than you’d expect. On older properties, original cast-iron or steel posts are often set in masonry that cannot be re-anchored without matching brick and mortar, so a repair that would be a simple post reset elsewhere becomes a masonry-matching job here.
We also deal with gates that swing across a neighbor’s frontage or overhang a shared drive apron. Clearance and no-encroachment adjustments are routine parts of working in University Park, because the lots are tight and the alleys are close.
Styles & brands we work with
Our Main University Park Services
Most University Park homeowners call us first about one of two problems: a gate that no longer opens or closes reliably, or an electric system that has stopped responding. Both are covered below.
Gate Repair in University Park
Gate repair in University Park ranges from hinge and latch work on original wrought-iron gates to full-track realignment on newer sliding systems. The blackland clay heaving means posts move seasonally, so we check plumb and rack as part of every repair, not just the obvious broken part. Details, pricing, and what to watch for are on the Gate Repair in University Park page.
Electric Gate Repair in University Park
Electric gate repair in University Park covers operators, logic boards, photo-eyes, loop detectors, keypads, and access control wiring. Summers here cook low-cost operator housings, and storm season brings power surges that take out control boards. We diagnose the system, not just the symptom. See Electric Gate Repair in University Park for full coverage.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in University Park
Gate installation in University Park is rarely a drop-in job. Most properties are in the 75225 ZIP code with gates set a few feet from the alley-side property line, often swinging over shared drive aprons, so the first questions are clearance, encroachment, and how the new gate reads from the street. A cedar driveway gate on a Tudor home needs different hardware and a different operator than a steel estate gate on a rebuild, and we quote both the gate and the operator as one job so the price you agree to is the price you pay. That’s the same full-service approach we describe on our Gate Installation hub.
Automatic Gate Installation
Signs you need it
You’re opening and closing the gate by hand daily, or the existing operator is down and parts are no longer made for it.
What it costs in University Park
Automatic gate installation in University Park typically runs $3,000 – $8,000 depending on gate size, operator class, and whether the post base needs masonry work.
How we do it
We measure the gate and approach, confirm post condition and clearance, select a matching operator, run the electrical and low-voltage lines, mount and program the operator, and test full open-close cycles with you.
Driveway Gate Installation
Signs you need it
The driveway is open to the alley or street with no barrier, or the existing gate is too small for today’s vehicles.
What it costs in University Park
Driveway gate installation in University Park generally runs $3,500 – $9,500, with custom steel or solid cedar pushing toward the higher end.
How we do it
We design the gate around your lot’s setback and swing path, size the posts for the soil and gate weight, build or install the gate, add the operator and safety hardware, and adjust until it clears every point without encroaching on the neighbor’s frontage.
Sliding Gate Installation
Signs you need it
The lot is too tight for a swing gate, or the driveway slopes and a swing arc would scrape or block the approach.
What it costs in University Park
Sliding gate installation in University Park is usually $5,000 – $9,500 for a complete track, gate, and operator system.
How we do it
We lay the track on the driveway edge, set the gate frame and rollers, mount the motor, run the safety edges and photo-eyes, and test slide speed and stopping force so it doesn’t overrun the track.
What Gate Installation Costs in University Park
| Item | Typical range in University Park |
|---|---|
| Automatic gate opener and controls | $1,200 – $4,200 |
| Driveway gate (steel, iron, or cedar) | $2,000 – $6,500 |
| Full installation with posts and electrical | $3,000 – $9,500 |
Does a University Park gate installation require a permit?
Most University Park gate installations need a permit through the city, and HOAs in the Park Cities often require design review first. We’re familiar with the process and can tell you what applies to your lot, but the city and HOA are the final authorities.
How long does a typical University Park gate installation take?
A standard single-drive gate with operator usually takes one to two days on site. Custom gates with masonry work, poured footings, or access control additions run longer, and we’ll give you a written timeline before work starts.
Brands We Service in University Park
We work on LiftMaster, FAAC, BFT, and Linear systems in University Park, and we stock common boards, remotes, photo-eyes, and safety edges locally so most repairs don’t wait on a parts shipment. For details on everything we carry, see our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in University Park, TX
| Service | Typical range in University Park |
|---|---|
| Gate repair (hinge, latch, post reset) | $200 – $700 |
| Electric gate repair (board, photo-eye, receiver) | $250 – $1,100 |
| Gate opener replacement | $900 – $2,500 |
| Automatic gate installation | $3,000 – $8,000 |
| Driveway gate installation | $3,500 – $9,500 |
| Sliding gate installation | $5,000 – $9,500 |
| Post replacement with masonry matching | $700 – $2,200 |
| Access control and keypad integration | $450 – $1,750 |
In University Park, prices run higher when the post is set in original brick or stone that has to be matched, when the gate swings across a shared edge and needs custom clearance work, or when a homeowner association requires a specific finish. Whatever the number, we quote it in writing and agree on it before any work starts.
Neighborhoods We Serve in University Park
We work across University Park, from the estates near the SMU campus to the traditional streets east of Preston Road and the newer rebuilds throughout 75225. Response for emergency gate work in University Park is typically same day.
- Preston Hollow border streets
- SMU area estates
- Turtle Creek corridor edge
- Caruth Hills side of 75225
- North University Park
Service Area – Cities Near University Park
Our trucks cover the wider Park Cities and North Dallas area. Beyond University Park, we regularly work in Highland Park, TX, Richardson, TX, Dallas, TX, and Addison, TX.
Serving University Park, TX — Our Local Coverage Area
We’re based in the University Park area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in University Park
For a gate that won’t close or is blocking a driveway, we can typically dispatch to University Park the same day. Call (866) 321-6117 early and we’ll tell you what the day looks like before you commit to a visit.
We’re used to University Park HOA and city requirements for gate height, finish, and placement, and we can provide the drawings and specs an HOA review committee wants. Approval itself comes from the HOA or the city, not from us, and we’ll work to whatever they approve.
Yes, we remove and haul away old gates, posts, operators, and wiring as part of the installation. If the post is set in original masonry and you want the brick or stone preserved, we’ll separate that work and quote it separately so there are no surprises.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What University Park Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Allen Wong"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Andre Coleman"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Jerome Ingram