Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Highland Park, TX
Gate installation in Highland Park comes with challenges most contractors never see: 1920s estate walls, expansive clay soil that moves with every storm, and town design review that treats your gate like part of the house itself. Bastion Gate Repair has served Highland Park since 2012, fabricating and installing driveway gates that match the original architecture instead of fighting it. Whether your cedar gate has rotted past repair or you’re adding a new automated entry to a custom build, we handle the full job: design, fabrication, mounting, operator wiring, and final trim. Call (866) 321-6117 for a free estimate.
Why Highland Park Homes Are Different
Highland Park’s estate lots and strict town aesthetic review make driveway and garden gates a visible extension of the home’s façade. Gate repair here isn’t about patching a hinge. It’s about matching the original wrought iron, cedear, or cast-stone details your neighbors see every day and the town reviews when work is done. Many properties are gated estates set back from the street, which means a failed operator or sagging gate is both a security problem and a curb-appeal emergency you can’t hide until spring.
Two local conditions shape nearly every gate job we do in Highland Park. First, the soil. The black clay along streets like Beverly and Lexington expands and contracts hard through wet and dry seasons. After a summer drought or a heavy rain, gate posts shift just enough to bind a swing gate. We routinely re-set posts and re-level tracks rather than just adjusting hinges, because the hinge adjustment only buys a few weeks. Second, the housing stock skews custom. Most gates here are ornamental iron, cedar, or masonry from original 1920s and 1930s builds, or newer custom work designed to match that character. Repairs often mean fabricating a replacement picket or rail to match a 90-year-old profile, not pulling a part off a shelf.
North Texas heat also punishes operator electronics. A control board mounted on a west-facing brick pillar in August can hit temperatures that cause thermal shutdowns on older LiftMaster and Viking units. We see that pattern often in Highland Park. Freeze-thaw cycles in January and February crack masonry piers and loosen anchor bolts. Severe spring hail and wind storms dent ornamental metal and bend upper rails. If you own a gate in 75205, you’ll deal with at least one of these conditions every few years.
Styles & brands we work with
Our Main Highland Park Services
Most Highland Park homeowners call us for one of two reasons: a gate that no longer opens and closes properly, or an automated system that won’t respond or behaves erratically. We handle both under one roof.
Gate Repair in Highland Park
Mechanical gate repair in Highland Park usually starts with a post that has moved in the clay soil, a hinge that has sagged under the weight of ornamental iron, or a weld that has cracked during a storm. We re-set posts in concrete with proper drainage, fabricate replacement components to match the existing design, and re-level the leaf so it clears the drive correctly. On cedar gates, we rebuild frames and replace rotted stiles rather than hanging a mismatched panel that would stand out on the street. See Gate Repair in Highland Park for full detail.
Electric Gate Repair in Highland Park
Automated gates here fail from heat, power surges, sensor misalignment, and aging control boards. We diagnose the whole system rather than swapping parts blindly. That means testing the operator, the loop detector, the safety edges, the keypad or intercom, and the power supply before recommending a fix. Many service calls end with a repaired board or re-aligned sensor rather than a full operator replacement, which matters when your equipment is a commercial-grade Viking or DoorKing unit. See Electric Gate Repair in Highland Park for the full troubleshooting scope.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Highland Park
Highland Park gate installation work typically splits into two categories: replacing a failed gate on an existing estate entry, and building a new automated entry for a newer custom home. Both jobs require a heavier structural approach than standard suburban work because the clay soil shifts posts and the town’s design review means the final product has to look like it belongs. We work with welded steel, ornamental iron, cedar, and masonry piers. The link to our Gate Installation service hub covers the full scope, but here is what Highland Park homeowners should know.
Automatic Gate Installation
Signs you need it
Your current gate is manual and you want perimeter control at the street, or your existing operator is so obsolete that replacement parts aren’t made anymore.
What it costs in Highland Park
A new automatic gate installation typically runs $4,200 to $10,500 depending on the gate material, operator class, and whether masonry piers need rebuilding.
How we do it
We survey the entry, fabricate or source the gate to match your home’s architecture, set the posts below the frost line with concrete, mount the operator, run the power and low-voltage wiring, install safety edges and loops, and program the access controls.
Driveway Gate Installation
Signs you need it
Your driveway entry is wide enough that a single-leaf gate would be too heavy and slow, or you’re building a new home and the architect specified a paired entry.
What it costs in Highland Park
Driveway gate installation in Highland Park typically starts around $4,200 for a basic steel double-leaf setup and runs upward of $13,000 for ornamental or masonry-integrated designs.
How we do it
We measure the full drive width and grade, design the leaf proportions for correct swing or slide geometry, fabricate each leaf, set heavy-duty posts or weld to structural columns, and align the leaves so they meet cleanly at center.
Sliding Gate Installation
Signs you need it
Your driveway slopes upward from the street or you don’t have the swing clearance for a traditional double gate.
What it costs in Highland Park
Sliding gate systems in Highland Park generally run $5,200 to $13,500 because they require a cantilever frame or track system plus a heavier operator.
How we do it
We pour or reinforce the track bed, set the guide posts, install the cantilever rollers or V-track, mount the slide operator, and set the limit switches so the gate parks fully open and closed without slamming.
What Gate Installation Costs in Highland Park
| Item | Typical range in Highland Park |
|---|---|
| Single swing gate, steel or cedar | $4,200 – $7,000 |
| Double swing gate, ornamental or masonry-integrated | $7,000 – $13,500 |
| Sliding gate, track or cantilever | $5,200 – $13,500 |
Do I need town approval for a new gate in Highland Park?
Yes, in most cases. Highland Park’s aesthetic review covers front-facing improvements including driveway gates, so budget design review time and possibly a permit before the physical work starts.
How long does a custom gate installation take in Highland Park?
Plan for two to four weeks total. Fabrication of ornamental iron or cedar to match your house takes a week or more, and we schedule the concrete cure before hanging the leaf and wiring the operator.
Brands We Service in Highland Park
We service Viking, Ghost Controls, DoorKing, and Elite equipment regularly in Highland Park, plus five other major brands. Our techs carry common control boards, sensors, and remotes for these systems, which means many repairs on these brands happen in one visit. For full detail on our brand coverage, see our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Highland Park, TX
| Service | Typical range in Highland Park |
|---|---|
| Gate repair (mechanical, hinge, post, weld) | $180 – $650 |
| Electric gate repair (board, sensor, loop) | $225 – $700 |
| Operator replacement | $600 – $2,400 |
| Automatic gate installation | $4,200 – $10,500 |
| Driveway gate installation | $4,200 – $13,000 |
| Sliding gate installation | $5,200 – $13,500 |
Highland Park pricing runs higher than the Dallas average for two reasons: custom fabrication to match original architecture, and the structural work required to set posts that won’t move on expansive clay. Every price is quoted and agreed before any work starts, so you won’t see a larger invoice after the gate is hung.
Neighborhoods We Serve in Highland Park
We work throughout Highland Park and the 75205 ZIP code, from the estate lots around Beverly Drive to the streets off Armstrong and Euclid. Most repair calls in Highland Park get a same-day or next-day response, and we schedule installation work around our fabrication timeline.
- Beverly Drive corridor
- Lakeside Drive area
- Armstrong Parkway
- Euclid Avenue and nearby streets
- Highland Park West
Service Area – Cities Near Highland Park
Bastion Gate Repair serves Highland Park and the surrounding cities from our base in DeSoto. We regularly handle gate work in Dallas, TX, including Preston Hollow and Bluffview, plus University Park, TX, Richardson, TX, and Irving, TX.
Serving Highland Park, TX — Our Local Coverage Area
We’re based in the Highland Park area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Highland Park
We schedule most Highland Park repair calls for same-day or next-day arrival, and we carry common operator parts and hardware on the truck. Installation work is scheduled around fabrication time, not dispatched as an emergency.
Repairs that restore the gate to its original appearance usually don’t require review, but any change to the gate’s design, height, or material often does. Check with the town before we start if you’re changing anything visible from the street.
Yes. We fabricate replacement pickets, rails, and hinge plates to match the original profiles on older Highland Park gates, so the repaired section doesn’t look like a patch. If the original is beyond saving, we can replicate the design in new steel.
Call Bastion Gate Repair at (866) 321-6117 for a free estimate on any gate project in Highland Park. We’ll walk the gate, diagnose what’s actually wrong, and give you a written price before any work begins.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Highland Park Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Allen Wong"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Andre Coleman"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Jerome Ingram