Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in University Park, TX | Bastion Gate Repair
We provide independent Ghost Controls service across University Park, repairing solar and AC swing gate operators, Rhino arms, control boards, keypads, and the gate hardware they drive. What makes our Ghost Controls work here different is that we deal with Park Cities gates sitting inches from an alley line, often swinging over a shared apron, anchored in masonry and brick that has to match after we re-set it. Most operators that get blamed for failing on University Park properties are actually fighting a heaving post or a racked gate. Call (866) 321-6117 and we’ll sort which it is before you pay for an operator you didn’t need.
Why University Park Residents Choose Us for Ghost Controls Service
Brent Calloway has been fixing gates in and around the Dallas County corridor long enough to know that a Dallas Ghost Controls service on a University Park driveway is a different job than the same operator on a suburban lot elsewhere. Our technicians work on Ghost Controls TB-175 and AR-155 operators in the Park Cities regularly, so we know the AR-series control board, the Rhino arm geometry, and the photo-eye and keypad wiring like the back of a hand. Because we’re independent, we don’t work from a warranty script. We trace the install, the gate hardware, and the post before we blame the board.
What our University Park customers get: Ghost Controls OEM control boards, Rhino arms, and bracket hardware for anything tied to safety and travel limits, plus quality aftermarket batteries, photo-eyes, and keypads where they meet spec. No guesswork around brand compatibility. We diagnose the actual fault, not the symptom. Learn more about our Ghost Controls sales & service and what we cover brand by brand.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in University Park
- Control board and battery failure from sun-baked operator housings. University Park summers push an unshaded Ghost Controls housing to 140°F and beyond. The board cooks and the battery degrades, leaving a gate dead or cycling on a weak solar charge. We replace boards with OEM units and swap in spec’d batteries, then re-aim solar panels.
- Rhino arm stall or sluggish swing that’s actually post heave. North Texas blackland clay shrinks through drought and swells after fall rains. A Ghost Controls arm pushing against a racked post will stall halfway or move slow. Homeowners often think the operator is dying. We re-plumb the post first, then re-teach travel limits.
- Photo-eye and keypad lens degradation from hail and UV. Park Cities hail and North Texas sun scratch and cloud photo-eye lenses, causing phantom reversals. External keypads go dim and won’t register keys except in shade. We re-aim or replace the eyes and swap sun-damaged keypads.
- Bracket failure at masonry piers and cast-iron posts. Many University Park gates hang off original 1920s – 1950s masonry. When a Ghost Controls bracket pulls loose from the pier, the arm sags and the latch won’t seat. Re-anchoring requires matching brick and mortar, not a sleeve anchor shot through the face.
- Gate sag and latch misalignment from seasonal clay movement. When a University Park post pivots even slightly, the latch drops out of alignment and the arm racks. We reset the post, re-hang the gate, and re-bracket the Ghost Controls operator to the gate’s corrected plumb line.
Ghost Controls Service in University Park: What Local Conditions Mean for Your Equipment
University Park gates routinely sit a few feet from the alley-side property line and overhang a shared drive apron. That means a Ghost Controls arm that changes its swing force or travel endpoint after a post heaves can swing across a neighbor’s frontage. The repair has to restore clearance and no encroachment, not just smooth operation. On a brick-pier driveway gate off a University Park alley apron, we traced a Ghost Controls dual-arm kit that stalled halfway open to a rear post that had racked in blackland clay after the fall rains. The symptom looked like a dying arm. We reset and re-anchored the post, matched the original mortar at the pier, re-bracketed the Rhino arm to the new plumb, and re-taught the travel limits. The gate now clears the shared apron the way it did when it was installed. We also swapped the sun-baked exterior keypad and re-aimed the photo-eyes so the gate stopped phantom-reversing at dusk.
That’s the difference in this area. The Ghost Controls board was fine. The gate and post geometry were not. A lot of shops would have quoted a new operator. We fixed the post and saved the customer the cost of an unnecessary board and arm swap, plus a very unhappy neighbor. We serve the full University Park service area, from the alley-fed lots along Preston and Hillcrest to the older brick-pier homes closer to Turtle Creek.
Ghost Controls Models & Products We Service in University Park
We carry Ghost Controls OEM control boards, Rhino arm assemblies, and bracket hardware for the TB-175 and TDS-175 heavy-duty dual swing kits, the AR-155 single-arm AC opener, and the Rhino series accessories. For batteries, photo-eyes, and exterior keypads we stock quality aftermarket units that meet Ghost Controls spec, which keeps local University Park turnaround short without cutting safety corners. If a control board, arm, and housing are all past service, we’ll tell you honestly. If the operator is sound and the gate is the problem, we repair the gate and keep your Ghost Controls system in place. That’s the independent-service difference.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in University Park
| Service | Typical Price in University Park |
|---|---|
| Service call and diagnostic | $65 – $129 |
| Gate realignment and post re-plumb | $190 – $400 |
| Ghost Controls control board replacement | $280 – $490 |
| Solar and battery backup install or replacement | $180 – $450 |
| Keypad entry replacement or re-wire | $120 – $260 |
| Photo-eye replacement or re-aim | $90 – $180 |
University Park pricing above reflects the specific challenge of working with masonry piers, original cast-iron posts, and gates that overhang shared aprons. Matching mortar and resetting posts takes time and care, but it’s the difference between a repair that holds and one that fails again in six months. Every price is quoted and agreed before any work starts, with no invoice surprises. Call (866) 321-6117 for an exact quote, free estimates are part of the job.
Serving University Park, TX — Our Local Coverage Area
We’re based in the University Park area and know this community well, and we also provide Ghost Controls service in Highland Park. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in University Park
The most common cause is sun-damaged or misaligned photo-eyes. University Park hail and North Texas UV cloud the lenses over time, and the eyes can shift when a post moves with clay moisture cycles. The Ghost Controls board reads that as an obstruction and reverses. We re-aim or replace the eyes, then verify the board’s travel limit values. If the gate’s still misbehaving, call (866) 321-6117 and we’ll test the full circuit.
In University Park we look at the post and gate geometry before we blame the arm, and we offer the same careful approach for Ghost Controls in Richardson. Blackland clay heaves posts, racks gates, and makes a healthy Ghost Controls arm stall against the bind. We re-plumb the post and re-teach travel limits, then run the arm through a full cycle. If the operator is genuinely failing, we replace the arm or board. Call us for a diagnostic before you buy any parts.
Yes. When a post heaves, the arc of the swing changes slightly, and a gate that once cleared a shared University Park apron can start encroaching. We re-set the post to plumb, re-bracket the Ghost Controls arm, and re-teach the open and closed limits so the gate follows its original arc. Call (866) 321-6117 and we’ll get the measuring done.
It depends on your solar panel output and battery health. A properly spec’d Ghost Controls Solar Power Kit with a fresh battery will run the gate through most outages, but a sun-damaged panel or a battery that’s been baking in a hot housing for two University Park summers won’t hold enough charge. We test the panel, the battery, and the board draw, and replace only what’s actually bad.
On University Park gates, the usual culprit is UV and hail damage to the keypad membrane and contacts. When the sun cooks the face, keys stop registering during daylight and come back after dark. We swap in a quality aftermarket keypad that meets Ghost Controls spec and wire it to the board cleanly. Call (866) 321-6117 for an exact quote, estimates are free.
Service Areas Near University Park
Bastion Gate Repair works across the south Dallas County corridor. We regularly provide Ghost Controls service in Seagoville, Dalworthington Gardens, DeSoto, Duncanville, and Cedar Hill. If you’re just outside the 75225 ZIP, give us a call and we’ll tell you whether we can route a tech to your street.
Book Your Ghost Controls Service in University Park Today
If your Ghost Controls gate is down, stalling, or swinging where it shouldn’t, call (866) 321-6117. We quote the work before we start it, and for active failures we aim to get a tech to your University Park property same day. Free estimates, honest diagnostics, and a repair that holds. Call us now.
Written by Brent Calloway, Owner at Bastion Gate Repair, serving University Park and the south Dallas County corridor since 2005.