Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across University Park
Electric gate repair in University Park typically runs $185 to $460 for most operator, sensor, and hinge-post corrections, with same-week scheduling available for non-emergency work and prioritized dispatch for gates stuck open or closed. We work throughout the 75225 zip code, from the tree-lined streets near Caruth Park up to the estate drives off Preston Road. This is not a market where you can swap a generic operator onto a 1930s iron post and call it done. The gates here sit close to property lines, carry heavy cedar or wrought-iron panels, and have to look right against brick piers and original masonry. Call (866) 321-6117 for a free estimate, and we will tell you exactly what your gate needs before any work starts.
Why Bastion Gate Repair Is University Park’s Preferred Electric Gate Repair Company
Most University Park gates are not off-the-shelf installations. They are custom-fabricated panels hung on posts that were set sixty or eighty years ago, often in masonry that has shifted with North Texas clay. We get called out when a gate sags, when an opener struggles against a racked post, or when a keypad stops responding after a hail storm. Our team works on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls in University Park, DoorKing, Elite, and Mighty Mule systems, so the brand on the operator rarely surprises us. More importantly, we diagnose the problem rather than defaulting to a replacement. A gate that drags its latch is usually a post issue, not a motor issue.
Bastion Gate Repair is led by Brent Calloway, and our approach to University Park jobs reflects what this specific housing stock demands. We know the difference between a post set in original brick and one set in newer cast concrete. We understand that a few degrees out of plumb on a gate near a shared drive apron is a property-line problem, not just a clearance problem. And we carry the hinge hardware, operator arms, control boards, and photo-eye assemblies needed to repair rather than replace whenever repair is the right call.
Styles & brands we work with
Commercial Gate Operator in University Park
Commercial Gate Operator work in University Park usually involves a heavier swing or slide gate at a private drive, a small HOA entrance, or an estate service gate where a residential-grade opener is simply undersized for the panel weight and cycle count. The job starts with a load calculation: panel weight, hinge condition, post plumb, and the operator’s duty rating. In University Park, many estate gates are solid cedar or steel infill, which catches wind load far more than an open picket gate. That means the operator and the post footings have to work together, or the system fails at the weakest point, usually the hinge side.
Operator Replacement and Safety Compliance
When a commercial operator fails, we check the entrapment protection first. UL 325 compliance matters on any automated gate, and after a North Texas hail season, photo-eyes and edge sensors are often the first components to degrade. A homeowner may think the operator is dead when the real issue is a safety input that is holding the gate in fault. We replace logic boards, relays, and safety sensors as needed, and we quote the full cost before we order parts.
Access Control and Loop Detectors
University Park estate drives often include an access keypad, a vehicle loop, or a phone-based entry system. When a gate starts opening randomly or refuses to close, the cause is frequently a failing loop detector or a keypad seal that has cracked from UV exposure and let moisture in. We test each component individually rather than replacing the whole system. That is what keeps a commercial gate operating within a repair budget instead of turning into a full replacement quote.
Gate Opener Repair in University Park
Gate Opener Repair in University Park covers the drive motor, gearbox, control board, remote receiver, and force settings on an existing automated gate. The most common call we get is a gate that has stopped mid-cycle or a motor that hums but does not move. On University Park properties, the root cause is often mechanical rather than electrical: a post has moved in the clay, the gate has sagged, and the operator is now fighting friction it was never sized to handle. We correct the mechanical alignment before we re-test the operator, because replacing a control board on a racked gate just burns out the next board.
Control Board and Remote Repair
When a LiftMaster or Ghost Controls opener loses its limits or stops responding to remotes, we bench-test the board and reprogram the unit after the physical gate is corrected. Brand-agnostic diagnostics save our University Park customers money: a board from one manufacturer is not interchangeable with another, and we would rather repair the existing board than sell you a new operator you do not need.
Photo-Eye and Safety Edge Testing
After hail, the photo-eye lenses on exposed driveway gates get pitted and cloudy. A pitted lens can cause false obstructions, and a gate that will not close is a security gap, not just an inconvenience. We clean, re-aim, or replace photo-eyes as needed, and we test the full entrapment protection cycle on every repair so the gate is actually safe, not just moving.
Trusted Brands We Service in University Park
We work on virtually every major gate brand, including yours. Our University Park customers run Viking and DoorKing operators on older estate gates, Ghost Controls on newer residential installs, and Elite systems on heavier commercial and HOA entrances. Because we are brand-agnostic, we stock control boards, remote receivers, limit switches, and capacitor kits across these platforms rather than making you wait on a factory order. That means a repair quote in University Park often comes with a shorter parts delay than a brand-specific shop can offer. From Mighty Mule to FAAC, residential to commercial, one call covers it. Find more detail on our Electric Gate Repair service page.
Common Electric Gate Repair Problems We See in University Park Homes
- Seasonal post heave and gate sag. Blackland clay shrinks in summer drought and swells after fall rain, so hinge posts move. A gate that cleared fine in August can drag its latch by November, and that sag returns every year unless the post footing is corrected.
- Hail-damaged photo-eyes and keypads. Exposed driveway gates take direct hail on the sensor lenses and keypad faces. Clouded lenses trigger false obstruction faults, and cracked keypads let moisture into the control board.
- Operator failure from wind load on solid panels. Solid cedar and wrought-iron infill panels catch North Texas wind like a sail. An undersized operator on a wind-exposed drive burns out force settings and limit switches faster than the same unit on a sheltered lot.
- Property-line clearance issues. University Park gates often sit a few feet from the alley side and swing across a shared drive apron. A gate that racks slightly out of plumb can encroach on a neighbor’s frontage, so a routine sag repair becomes a clearance correction.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in University Park, TX
A typical gate opener repair in University Park runs $185 to $320 for control board replacement, limit adjustment, or photo-eye repair. Commercial gate operator work starts around $400 and can reach $1,500 or more when a heavier Viking or DoorKing unit needs a new motor, gearbox, and safety edge. Hinge-post correction on an older masonry pillar typically falls between $350 and $900 depending on whether we re-set the post in place or pour a new footing and match the brick and mortar. Every price is quoted and agreed before any work starts. The estimate is free, and you will not see a larger invoice than the number we gave you. Call (866) 321-6117 to schedule a diagnosis.
We Also Serve Cities Near University Park
Bastion Gate Repair handles electric gate work across the Park Cities and surrounding North Dallas corridor. We regularly schedule service in Highland Park, Richardson, Dallas, and Addison for customers who need the same level of gate expertise we provide throughout University Park. If your property is outside the 75225 zip, call and ask. We are based in DeSoto and cover the full North Texas metro.
Serving University Park, TX — Our Local Coverage Area
We’re based in the University Park area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in University Park
Your hinge post is moving in the blackland clay. The soil shrinks during summer drought, the post settles slightly out of plumb, and then fall rains swell the clay and push it the other way. The gate drags its latch and the operator struggles. The permanent fix is to re-set the post footing to true, often replacing deteriorated concrete around a cast-iron or steel post. If the post is set in original brick, we match the mortar and brick as closely as the existing masonry allows. Call (866) 321-6117 for a footing assessment and a fixed quote.
Most operators have a manual release, but before touching it, make sure the gate cannot roll or swing under its own weight. Pull the release handle only after blocking the panel so it will not move once freed. If the gate is tied to a battery backup, disengage that circuit first or the motor may re-engage while you are working. On a stuck or heavy estate gate, call us instead. A gate that will not open after a power cut is often a failed capacitor or control board, and that is a job for a trained technician, not a force-the-gate situation.
The only way to know is to test it. We test the photo-eye response, the reversing edge, and the force setting on every University Park repair we complete. A gate that reverses only sometimes or that ignores an obstruction is a serious safety failure, especially on a property with children or pets. Hail commonly pits photo-eye lenses so they read false obstructions or fail to read a real one. We replace pitted lenses and re-verify the full UL 325 safety cycle. Call (866) 321-6117 and tell us what the gate is doing. We will diagnose the system, not just the symptom.
We can match it closely. University Park homes from the 1920s through the 1950s used specific brick blends and mortar mixes that are no longer made new. Our crew sources reclaimed brick where needed and mixes mortar to match the existing color and texture. The match will not be perfect on an 80-year-old wall, but it will be close enough that the repair does not draw the eye. If the post is beyond repair, we quote a full replacement with matching masonry before any demolition starts.
It should not, and that is exactly why we correct post plumb and panel clearance on every University Park repair. Many of these gates sit a few feet from the alley-side property line and overhang a shared drive apron. A few degrees of rack changes the swing path enough to encroach. After we set the post and re-hang the panel, we run a full open-close cycle and verify the gate stays inside your property line through the entire travel. If it does not, we adjust the hinge geometry or trim the panel rather than leaving you with a gate that crosses a boundary.
Call Bastion Gate Repair for Electric Gate Service in University Park
If your gate is sagging after the rain, dead after a storm, or throwing a fault on the control board, we can fix it. Bastion Gate Repair serves University Park with the same technician on the job from diagnosis through repair, and we quote every price before work begins. A gate that does not close is a security gap, and a gate that swings over a neighbor’s frontage is a liability. Do not wait for the next storm to make it worse. Call (866) 321-6117 today for a free estimate, or reach out to our Electric Gate Repair team to schedule service.
Written by Brent Calloway, Owner at Bastion Gate Repair, serving University Park and the North Texas metro.