Farm & ranch
Wrought iron
Wood & steel frame
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Farmers Branch, TX
Gate installation in Farmers Branch most often means retrofitting an older property, not breaking ground on a new one. The homes here were largely built between the 1950s and 1980s, and many still have their original driveway gates or nothing automated at all. When we install a gate in Farmers Branch, we’re usually working around mature trees, established concrete, and fence lines that have been in place for decades. That changes how we approach every job.
Farmers Branch sits on the Dallas side of the Elm Fork Trinity drainage, and the black clay soil underneath 75234 is the most important local factor in any gate project. Clay expands when wet and contracts when dry. Over thirty or forty years, that cycle moves posts, twists frames, and throws operators out of alignment. A gate installation here has to account for that movement from day one, or the gate will sag within a few seasons. If you’re planning a new gate or replacing an old one, call us at (866) 321-6117 and we’ll tell you what your site actually needs.
Why Farmers Branch Homes Are Different
Farmers Branch is a fully built-out inner-ring suburb. There is essentially no new residential construction left, which means the work we do here is almost always retrofit. The housing stock is mid-century ranch and late-20th-century two-story homes on mature, well-treed lots. Driveway gates from that era were often decorative wrought iron or simple chain-link, installed decades ago with shallow post footings. Those footings are now the weak point. In this city, we re-set and re-plumb posts far more often than we replace entire gates.
The climate compounds the soil problem. Spring in Farmers Branch brings hail and high wind. Summer pushes temperatures past 100 degrees for weeks. Metal expands, finishes bake, operator boards overheat inside their housings, and hinges carry stress from posts that have shifted a few degrees since winter. A gate that worked fine in March can bind by August. That’s not poor hardware. That’s the ground moving under it. Property managers and HOA boards in Farmers Branch deal with this every year on community entrances, and the fix almost always starts underground.
Styles & brands we work with
Our Main Farmers Branch Services
Most calls we get in Farmers Branch fall into two categories: a gate that has stopped moving mechanically, and an automated system that has stopped responding electrically. Both are covered below, and each has its own dedicated page for this city.
Gate Repair in Farmers Branch
Mechanical gate repair in Farmers Branch usually means one of three things: a post has moved and the gate is dragging or sagging, a hinge or weld has failed, or a wheel or track has worn out on a sliding gate. Because so many of these gates were installed before current building practices, we frequently find undersized posts or footings that were never meant to hold an automated gate. We diagnose the actual failure rather than defaulting to a replacement. On a typical Farmers Branch repair, we’ll re-plumb the post, replace the hardware, and re-hang the leaf so it swings true. Read the full breakdown at Gate Repair in Farmers Branch.
Electric Gate Repair in Farmers Branch
Electric gate failures in Farmers Branch spike in summer. Heat is hard on control boards, capacitors, and sensors, and the same soil movement that bends posts also shifts the alignment of safety edges and photo eyes. We work on the full electrical side: openers, loop detectors, keypads, remotes, and access control modules. The diagnostic process starts with the power source and works through the logic board, because replacing a board when a sensor is the problem doesn’t fix anything. For a complete look at what we service, see Electric Gate Repair in Farmers Branch.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Farmers Branch
New gate installation in Farmers Branch is rarely a blank-slate project. Most properties in 75234 are on established lots with existing fence lines, concrete approaches, and utility runs already in place. That means the critical work happens before any gate goes up: assessing post depth, soil condition, and whether the existing approach can support the gate’s travel. On a standard residential installation here, we are typically replacing a manual gate with an automated one, or swapping a failing operator and gate leaf for a system sized correctly for the opening.
Because Farmers Branch sits on expansive clay, we set posts deeper than code minimums and use concrete with proper drainage so water doesn’t pool at the footing. That’s the difference between a gate that still swings cleanly in five years and one that needs re-leveling after two wet springs. For a complete guide to how we handle new systems from the ground up, see Gate Installation.
Automatic Gate Installation
Signs you need it
You’re opening and closing the gate by hand on a daily basis, or the existing opener can’t move the gate without laboring or stalling.
What it costs in Farmers Branch
A full automatic gate installation with opener in Farmers Branch typically falls between $1,500 and $5,900, depending on gate size and operator type.
How we do it
We set or verify the posts, hang the gate, mount the operator, wire the control board and safety sensors, then test the complete travel cycle.
Driveway Gate Installation
Signs you need it
Your driveway opening is unsecured or the current gate no longer matches the function you need, whether that’s privacy, vehicle control, or both.
What it costs in Farmers Branch
Driveway gate installation in Farmers Branch generally runs $1,450 to $5,600, with the higher end covering custom steel and automated hardware.
How we do it
We measure the opening and slope, set posts in concrete, hang and align the gate leaf, then install the opener and any access controls.
Sliding Gate Installation
Signs you need it
Your driveway has limited swing clearance or a steep grade, so a sliding gate is the only workable configuration.
What it costs in Farmers Branch
Sliding gate installation typically costs between $1,600 and $6,100 in Farmers Branch, driven by track length and motor duty cycle.
How we do it
We pour a level track base, install the rail and rollers, set the gate, mount the operator with proper end stops, and wire safety sensors.
What Gate Installation Costs in Farmers Branch
| Item | Typical range in Farmers Branch |
|---|---|
| Full automatic gate with opener | $1,500 – $5,900 |
| Driveway gate with hardware | $1,450 – $5,600 |
| Sliding gate with track and motor | $1,600 – $6,100 |
Do I need a permit to install a gate in Farmers Branch?
Most residential gate installations on private property in Farmers Branch require city review, and we can confirm current requirements for your address before any work begins. The price is agreed in writing first, and we handle the submission when permits are required.
Can you install a gate on my existing concrete driveway?
Yes. We core-drill and set posts into existing concrete with proper depth and anchoring, which is standard on Farmers Branch lots where the driveway was poured decades ago. Clay movement matters, so we design the anchoring to resist seasonal soil shift.
Brands We Service in Farmers Branch
We work on equipment from LiftMaster, FAAC, BFT, and Linear, among others, and we keep common components stocked for those brands so a repair doesn’t wait on a slow parts order. That’s a practical advantage when a Farmers Branch HOA entrance is stuck open. See our brands for the full list of equipment we handle.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Farmers Branch, TX
| Service | Typical range in Farmers Branch |
|---|---|
| Gate repair (labor only) | $75 – $190 |
| Spring or roller replacement | $120 – $480 |
| Hinge or weld repair | $85 – $450 |
| Automatic gate installation | $1,500 – $5,900 |
| Driveway gate installation | $1,450 – $5,600 |
| Sliding gate installation | $1,600 – $6,100 |
| Operator replacement | $180 – $340 |
| Logic board replacement | $220 – $480 |
| Sensor or safety edge replacement | $100 – $390 |
| Loop detector repair | $110 – $430 |
In Farmers Branch, the two biggest cost drivers are post condition and operator type. A gate hung on posts set shallow decades ago in clay soil usually needs excavation and re-setting before any new hardware goes on, and that’s real labor. Whatever the scope, the price is quoted and agreed before any work starts.
Neighborhoods We Serve in Farmers Branch
We work across all of Farmers Branch, from the older ranch-house streets north of Valley View to the townhome and condo communities along the western edge of 75234. The pattern is consistent citywide: mid-century lots, clay soil, and gate hardware that has outlived its original installation.
- Valwood Park
- West Park
- Mercer Crossing
- Oakbrook Park
- Ridgeview Estates
Service Area – Cities Near Farmers Branch
Bastion Gate Repair covers Farmers Branch and the surrounding Dallas inner-ring suburbs. We also serve Addison, TX, Carrollton, TX, Irving, TX, and University Park, TX.
Serving Farmers Branch, TX — Our Local Coverage Area
We’re based in the Farmers Branch area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Farmers Branch
We schedule repairs across Farmers Branch every business day, and emergency calls for gates stuck open or closed are prioritized. Call us at (866) 321-6117 and we’ll give you the next available window for your address in 75234.
It depends on your community’s covenants. Many Farmers Branch HOAs require design review for a new gate or a visible replacement, though repairs that match the existing appearance usually don’t. We can tell you what most communities in this area require, but your HOA office is the final word.
Yes. We are not separated into mechanical and electrical crews. One Bastion team in Farmers Branch handles posts, hinges, operators, boards, and sensors in the same appointment, which reduces repeat trips and gets the gate working again in a single service call.
If your gate is sagging, stuck, or not responding, call (866) 321-6117 for a free estimate. We serve the entire 75234 area and quote every job in writing before work begins.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Farmers Branch Customers Say
"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Rachel Doyle"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Lucia Martinez"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Mark Meyer