Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Mesquite, TX
Gate installation in Mesquite usually means replacing a driveway gate that’s been standing since the Reagan administration. Most homes here were built between the 1950s and 1980s, and the original chain-link or wrought-iron gates have spent decades fighting North Texas clay soil, hail, and hundred-degree summers. We install new gates on fresh footings, rebuild leaning posts, and convert manual gates to automated systems. If you need a straight answer on what your Mesquite gate job will cost, call (866) 321-6117 for a free estimate.
Why Mesquite Homes Are Different
Mesquite is fully built out. Unlike the growth edges of the metroplex, most subdivisions in 75149 and 75150 aren’t adding new homes, which means we’re not doing many new-construction gate installs. We’re doing retrofit work: tearing out gates that predate the first Bush administration and setting new ones in soil that has been swelling and shrinking for half a century.
The Blackland Prairie clay under Mesquite is the real story. It expands when wet and contracts during dry spells, which heaves gate posts a little more each year. A gate that closed cleanly in March can drag by August without anyone touching it. On the older streets off 75149, gate posts set in original expansive clay often lean a few degrees after a dry summer. The real fix is resetting the post in deeper concrete rather than adjusting hinges, because a hinge adjustment fails again by the next drought if the footing isn’t rebuilt. That’s the daily judgment call here: new footing and post, or salvage what’s there. Sometimes the concrete is fine and the post is the problem; sometimes it’s all coming out.
We also plan around Mesquite weather. Spring hail and straight-line winds bend lighter ornamental gate frames, and July heat bakes wood gates until they split at the joints. A Mesquite gate needs hardware that can take the movement and a posts set below the active clay zone when possible.
Styles & brands we work with
Our Main Mesquite Services
Most calls we get in Mesquite fall into two buckets: gates that won’t move right, and gates that won’t open automatically. Here’s what each involves in this city.
Gate Repair in Mesquite
On Mesquite’s older brick ranch homes, the typical repair is a sagging or dragging gate with rust at the hinge welds. The hinges fail first on gates built in the 1970s and 80s, and the expansive clay makes the problem worse by shifting the post a few degrees every wet-dry cycle. We replace hinge hardware, straighten frames, weld cracks at the joints, and reset posts when the footing has heaved. Sometimes the gate itself is worth saving even when the post isn’t. For the full breakdown of what we fix and what it costs in Mesquite, see Gate Repair in Mesquite.
Electric Gate Repair in Mesquite
Automatic gates in Mesquite fail in predictable ways: control boards cook in the summer heat inside metal enclosures, loop detectors stop reading vehicles after years of clay movement, and openers strip gears trying to move gates that no longer sit square. We diagnose the actual system, not just the symptom, which means we test the operator, the sensors, the loops, and the power feed before quoting. A gate that won’t open or close on its own is a security gap, not a parking inconvenience. Read Electric Gate Repair in Mesquite for what a full diagnostic covers.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Mesquite
Most gate installations in Mesquite are replacements, not first-time installs. The house was built in the 1960s or 70s, the original gate outlived two or three fences, and the post footings are cracked or heaved from fifty years of expansive clay doing what expansive clay does. That means the job starts underground: we evaluate whether the existing footings can be reused or whether new posts need to be set below the active soil zone. A gate hung on a bad footing will sag within two seasons no matter how good the hinges are. We handle the whole replacement, from demolition of the old gate to final adjustment of the new one, and we tell you straight whether your old concrete can stay. Learn more about our full installation process on our Gate Installation page.
Automatic Gate Installation
Signs you need it
You’re opening and closing your driveway gate by hand every day, or an old operator died and you’ve decided to stop patching it.
What it costs in Mesquite
Automatic gate installation in Mesquite typically runs $2,500 to $9,500 depending on the operator, gate weight, and electrical run.
How we do it
We build the gate and post assembly first, then mount the operator, run power to the location, install the safety edges and photo eyes, and program the remote and keypad before testing the full cycle.
Driveway Gate Installation
Signs you need it
A new fence went in and the old gate no longer matches, or the old gate frame is too corroded at the welds to keep repairing.
What it costs in Mesquite
Driveway gate installation in Mesquite typically ranges from $1,200 to $6,000 for the gate and posts, with automation adding more.
How we do it
We measure the opening, remove the old gate and hardware, set new posts or repair existing footings, hang the new gate, and adjust the gap and latch for Mesquite’s soil movement.
What Gate Installation Costs in Mesquite
| Item | Typical range in Mesquite |
|---|---|
| Driveway gate and posts, standard steel or wood | $1,200 – $6,000 |
| Automatic opener and full automation package | $2,500 – $9,500 |
| Custom or oversized gate with electrical work | $6,000 – $12,000+ |
Does Gate Installation in Mesquite include removing the old gate?
Yes. Removal of the existing gate and hardware is included in our quote. We haul away the old gate and posts unless you want to keep the materials. We also assess the existing footings before we ever order the new gate.
Can you match my existing fence in Mesquite?
Usually, yes. We match steel, aluminum, wood, and ornamental styles to the existing fence line. On older Mesquite homes with original wood privacy fences, we recommend wood or steel styles that will hold up to the same weather the fence has absorbed. Call (866) 321-6117 for an exact match assessment.
Brands We Service in Mesquite
We service Viking, Ghost Controls, and DoorKing operators on Mesquite driveways, along with Elite commercial systems. Our technicians carry common control boards, sensors, and remote transmitters for these brands, so a one-truck visit handles most diagnostics and repairs. See our brands for the full list of systems we work on.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Mesquite, TX
| Service | Typical range in Mesquite |
|---|---|
| Driveway gate and posts, standard steel or wood | $1,200 – $6,000 |
| Automatic opener and full automation package | $2,500 – $9,500 |
| Custom or oversized gate with electrical work | $6,000 – $12,000+ |
| Weld and reinforce sagging gate frame | $225 – $475 |
| Reset leaning gate post in new concrete | $350 – $725 |
| Replace rusted gate hinges and hardware | $150 – $350 |
| Adjust or replace gate latch and strike | $95 – $225 |
| Diagnose and repair gate opener circuit board or sensor | $200 – $520 |
| Replace operator motor or gear assembly | $425 – $1,100 |
In Mesquite, costs climb when a gate post leaning in expansive clay needs a deeper footing than the original, or when an old electrical run has to be replaced to meet current standards for a new operator. The price you’re quoted is the price you approve before any work starts. No surprise line items after the job is done.
Neighborhoods We Serve in Mesquite
We work across Mesquite from the older 1950s subdivisions in 75149 to the newer developments along the eastern edge of 75150 and 75187. Response for most repair calls in Mesquite is same-day or next-day, depending on parts and how many trucks are already dispatched that morning.
- Old Mesquite and the 75149 streets near downtown
- Creek Crossing and the neighborhoods off Oates Drive
- North Mesquite around 75150
- East Mesquite and the 75187 area
- Pleasant Valley
Service Area – Cities Near Mesquite
Along with Mesquite, Bastion Gate Repair covers the surrounding suburbs across southeast Dallas County. We handle gate and operator work in Balch Springs, TX and Sunnyvale, TX, both of which share the same clay soil and weather patterns. We also serve Seagoville, TX and Hutchins, TX for homeowners and small commercial properties. If you’re on the edge of Mesquite and not sure which service area you fall into, call us and we’ll confirm.
Serving Mesquite, TX — Our Local Coverage Area
We’re based in the Mesquite area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Mesquite
For most gate repairs in Mesquite, we can schedule a same-day or next-day visit depending on call volume and parts availability. Emergency calls for gates stuck open or closed get priority. We don’t promise a dispatch window we can’t keep, but we’ll tell you the truth when you call.
Most residential gate replacements don’t require a permit in Mesquite, but some HOAs require architectural review before a new gate goes in. We’re familiar with the local requirements and can tell you what your neighborhood needs. If a permit is needed, the quote will spell out the timeline.
Both. We service and install residential driveway gates and commercial operators for apartments, small businesses, and gated communities in Mesquite. Commercial jobs often involve access control integration, so the quote covers the operator, loops, and keypad or card reader work as one scope. Call (866) 321-6117 and describe the system; we’ll tell you if we can handle it.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Mesquite Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Luis Rodriguez"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Jodi Walsh"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Rachel Doyle