Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Forney, TX
Gate installation in Forney usually runs $3,200 to $9,500 for a complete automatic driveway gate, depending on material, length, and whether you need a new opener. Most Forney homes were built between the late 1990s and today, so we’re typically replacing builder-grade steel tube gates or adding a gate where a privacy fence currently ends. The Blackland Prairie clay under Forney shifts with every wet-dry cycle, which means post depth and concrete footing design matter more here than almost anywhere else in the metroplex. If you’re weighing repair against replacement, call us at (866) 321-6117 and we’ll tell you straight what your gate actually needs.
Why Forney Homes Are Different
Forney grew fast during the 2000s housing boom, and that shapes nearly every gate we touch. The dominant gate here is a steel tube driveway gate on a wood or steel post, installed when the house was built or added by a fencing contractor after a pool went in. These are not ornamental iron gates from the 1950s; they’re 10 to 25 year old systems whose posts were often set shallow in expansive clay. When hot dry summers pull moisture out of the soil, the clay shrinks and posts lean. When heavy rain returns, the clay swells and posts heave. A gate that swung cleanly last spring can drag on the driveway by August.
That soil movement is the single biggest driver of gate work in Forney’s 75126 ZIP code. We regularly reset posts and re-hang gates on homes that are barely a decade old, something you’d rarely see in older Dallas suburbs with more stable, compacted ground. Add in Forney’s summer heat and UV exposure, and wood privacy gates warp while opener circuit boards bake inside their housings. The housing stock is mostly brick-veneer tract homes with large lots, so gates tend to be wide, heavy, and frequently automated – which means the repair call is rarely just about a hinge.
Styles & brands we work with
Our Main Forney Services
Most Forney homeowners call us for one of two things: a gate that stopped working mechanically, or an electric gate that stopped responding to remotes, keypads, or sensors. Both are covered under one roof.
Gate Repair in Forney
When a gate in Forney starts sagging, scraping, or won’t latch, the cause is usually post movement in the clay soil or worn hardware on a gate installed in the 2000s. We replace hinges, rebuild weld points on steel tube frames, reset leaning posts in deeper concrete footings, and re-align gates so they close square. No call-out guesswork – we diagnose the actual failure before we recommend any work. Gate Repair in Forney covers everything from wood privacy gates to heavy steel driveway gates.
Electric Gate Repair in Forney
Automatic gates in Forney fail in predictable patterns: circuit boards damaged by heat, photo eye sensors knocked out of alignment by shifting posts, and opener arms that burn out fighting a gate that no longer swings freely. We test the full system – from the control board to the safety edges to the loop detector – and repair the failing component rather than quoting a full replacement as a default. Electric Gate Repair in Forney is where you’ll find details on opener diagnostics, keypad wiring, and access control troubleshooting.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Forney
Gate installation in Forney means building for Blackland Prairie clay first and everything else second. A new automatic driveway gate here should sit on posts sunk at least 36 inches into concrete with rebar, because anything shallower will lean within three to five years as the soil cycles through Forney’s hot dry summers and heavy spring rains. Most of what we install replaces a builder-grade steel tube gate from the 2000s or adds a gate where a fence line currently dead-ends at the driveway. Every installation includes a written quote with the full price agreed before work starts, and we handle the complete job: gate fabrication or sourcing, posts, hinges, opener, safety sensors, and access controls. For a full breakdown of what a new gate involves, see Gate Installation.
Automatic Gate Installation
Signs you need it
You’re still getting out of the car to open a manual gate, or your current opener has failed and the gate is too heavy for a repair to make sense.
What it costs in Forney
Plan for $3,200 to $7,800 depending on gate size, opener type, and whether we’re reusing existing posts or setting new ones in deeper footings for the clay soil.
How we do it
We survey the driveway approach, set or confirm posts, mount the gate, install the opener and safety photo eyes, then program remotes and keypads and test the full travel cycle.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is rusted through at the frame, the posts have shifted past the point of resetting, or you never had one and want the security of a controlled entry point.
What it costs in Forney
A new slide or swing driveway gate typically runs $4,700 to $9,500 here, with steel tube gates on the lower end and custom steel or wood composite gates higher.
How we do it
We measure the exact driveway width, account for slope and drainage, install deep-set posts, hang the gate, and connect it to an opener matched to the gate’s weight and cycle frequency.
What Gate Installation Costs in Forney
| Item | Typical range in Forney |
|---|---|
| Single steel tube driveway gate (manual) | $1,900 – $4,500 |
| Automatic driveway gate with opener and sensors | $3,200 – $7,800 |
| Full custom steel or composite gate with access control | $4,700 – $9,500 |
How long does a gate installation take in Forney?
Most automatic driveway gate installations in Forney take one to two days, but the full timeline depends on concrete curing and whether we’re fabricating a custom gate. We schedule the work around your access needs so you’re never locked out of your own driveway.
Do you handle the opener, wiring, and safety sensors with a new gate?
Yes. Every automatic gate installation in Forney includes the opener, vehicle loop or photo eye sensors, safety edges where applicable, and programming for remotes and keypads. Call (866) 321-6117 and we’ll walk through what your site actually needs.
Brands We Service in Forney
Bastion Gate Repair is brand-agnostic by design. We service LiftMaster, FAAC, BFT, Linear, and other major systems, and we diagnose what’s actually failing before recommending any part swap. See our brands for the full roster and what we stock locally for Forney service calls.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Forney, TX
| Service | Typical range in Forney |
|---|---|
| Gate repair (hinge, post reset, weld, alignment) | $180 – $650 |
| Electric gate repair (control board, sensor, opener arm) | $240 – $850 |
| Gate opener installation | $900 – $2,800 |
| Access control and intercom integration | $600 – $2,500 |
| Single steel tube driveway gate (manual) | $1,900 – $4,500 |
| Automatic driveway gate with opener and sensors | $3,200 – $7,800 |
| Full custom steel or composite gate with access control | $4,700 – $9,500 |
In Forney the two things that push a quote up are post work and opener replacement on a heavy gate. A gate that’s fine but sitting on leaning posts in clay soil usually needs deeper footings, which adds labor; a gate that’s heavy but paired with an undersized opener will fail again until the opener is matched to the load. Every price is quoted and agreed before any work starts.
Neighborhoods We Serve in Forney
We work throughout Forney’s 75126 ZIP code, from the newer subdivisions along FM 548 to the established streets north of Highway 80. Expect a same-day or next-day visit for repair calls in most of the city, depending on when you call.
- Travis Ranch
- Devonshire
- Windmill Farms
- Fox Hollow
- Walden Pond
Service Area – Cities Near Forney
Bastion Gate Repair covers Forney and the surrounding communities, including Travis Ranch, TX, Sunnyvale, TX, Combine, TX, and Crandall, TX. If your gate is acting up and you’re just outside Forney, call us and we’ll confirm coverage.
Serving Forney, TX — Our Local Coverage Area
We’re based in the Forney area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Forney
We schedule repair calls in Forney for same-day or next-day service in most cases. Emergency situations – like a gate stuck open that leaves your property exposed – are prioritized when you call (866) 321-6117.
Many Forney subdivisions have HOA design standards that govern gate height, material, and finish. We don’t file paperwork for you, but we know which questions your HOA will ask and we build to those typical standards so your install doesn’t get flagged after the fact.
We cover all of Forney’s 75126 ZIP code, including Travis Ranch, Devonshire, Windmill Farms, and the neighborhoods along FM 548. If you’re near the Forney-Terrell edge or out toward the lake, call and we’ll confirm scheduling for your address.
Call Bastion Gate Repair at (866) 321-6117 for a free estimate on any gate project in Forney – repair, electric diagnostics, or full installation, quoted before work begins.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Forney Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Erin Hoffman"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Allen Wong"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Andre Coleman