Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Crandall, TX
Gate installation in Crandall spans two very different jobs: a welded pipe farm gate across a 30-foot pasture opening on a multi-acre tract, and a builder-grade ornamental gate on a quarter-acre lot in a new subdivision. Bastion Gate Repair has served Crandall since 2012, and we stock the parts, operators, and hardware for both ends of that spectrum. If you’re pricing a new driveway gate or replacing one that clay soil has racked out of square, call (866) 321-6117 for a free estimate.
Why Crandall Homes Are Different
Crandall sits on the Kaufman County side of the metroplex where blackland clay governs how gates behave. That soil swells after heavy spring rain and shrinks through dry summer heat, moving posts a few degrees at a time until a gate that swung cleanly in August drags the ground by April. We re-set and re-plumb posts here more than we do full gate replacements, because the frames are often fine and the ground is what failed.
The housing mix compounds it. Older ranch-style homes and manufactured homes on multi-acre rural parcels carry long driveway gates, pipe-and-wire pasture gates, and perimeter fencing that take the bulk of repair calls. New brick tract homes in subdivisions built out during the recent growth spurt arrive with lighter ornamental gates that wind and hail beat up faster than owners expect. Crandall’s growth means we see both every week, often on the same day.
Styles & brands we work with
Our Main Crandall Services
Most calls we take in Crandall fall into two categories: mechanical repair on gates that won’t swing or latch, and electrical repair on automatic systems that won’t open or hold. Both are covered below with their own dedicated Crandall pages.
Gate Repair in Crandall
A sagging gate on a Crandall acreage property is usually a post problem, not a hinge problem. Clay soil heave pushes posts out of plumb, and once the post leans, the gate binds at the latch or drags along the drive. We handle post resetting, hinge replacement, weld repair on pipe frames, and full re-alignment. For a complete breakdown of what gate repair costs in Crandall and how we diagnose mechanical failures, see Gate Repair in Crandall.
Electric Gate Repair in Crandall
Automatic gate systems in Crandall fail in predictable ways: lightning takes out control boards during spring storms, ants and moisture work their way into operator housings, and loop detectors lose sensitivity as the clay shifts beneath the conduit. We diagnose the whole system rather than swapping parts blindly. For specifics on operator repair, access control, and sensor work, see Electric Gate Repair in Crandall.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Crandall
Gate installation in Crandall has to account for what the ground does after we leave. A new gate set on shallow posts in blackland clay will be out of square within two seasons, so we size post depth and concrete footings for soil that moves. For new construction in subdivisions we match the gate to the builder’s setback and HOA specs where they apply; for acreage tracts we build for livestock, wind load, and a 16-foot or wider opening that a standard residential gate won’t cover. Our Gate Installation work runs from single driveway gates to full automated entries with operators and safety edges.
Automatic Gate Installation
Signs you need it
You’re opening and closing a heavy gate by hand every day, or you have a gate that was never automated and you want perimeter control without leaving the vehicle.
What it costs in Crandall
Automatic gate installation in Crandall typically runs $3,700 to $9,200 depending on operator type, gate weight, and whether power or intercom is already at the entry.
How we do it
We set the gate and posts first, confirm the swing or slide is true, then mount the operator, run power and control wiring, set travel limits, and install safety edges and photo sensors before testing full cycles.
Sliding Gate Installation
Signs you need it
Your driveway slopes or curves, the setback is too tight for a swing gate, or you have a wide commercial-style opening that a swing leaf can’t span.
What it costs in Crandall
Sliding gate installation in Crandall typically falls between $4,100 and $10,200, with the higher end covering automated operators and concrete track work.
How we do it
We pour the track foundation and set the V-track or cantilever rollers, hang the gate frame, mount the operator and rack, then tune travel speed, limit switches, and safety loops.
What Gate Installation Costs in Crandall
| Item | Typical range in Crandall |
|---|---|
| Automatic gate installation | $3,700 – $9,200 |
| Sliding gate installation | $4,100 – $10,200 |
| Manual driveway gate installation | $1,400 – $4,300 |
Do you handle the power run and safety edges on a new automatic gate?
Yes. We run the electrical service to the operator, install the control board, safety edges, photo sensors, and loop detectors where the driveway calls for them. Every automatic gate we install in Crandall leaves our hands compliant with current safety standards.
How long does a gate installation in Crandall take?
Most residential installations run one to two days from first hole to final test. Custom sliding gates on large acreage openings can take longer when concrete track work needs cure time before we hang the leaf. We’ll give you a written schedule before any work starts.
Brands We Service in Crandall
We work on virtually every major gate brand, including LiftMaster, FAAC, BFT, and Mighty Mule. We keep common control boards, remotes, and safety components stocked for faster turnaround on Crandall service calls, and our techs know the failure points of each brand well enough to diagnose rather than swap parts by guesswork. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Crandall, TX
| Service | Typical range in Crandall |
|---|---|
| Gate repair service call | $120 – $240 |
| Gate hinge repair | $170 – $380 |
| Gate post resetting | $260 – $580 |
| Gate wheel replacement | $190 – $360 |
| Automatic gate opener repair | $240 – $780 |
| Control board replacement | $320 – $710 |
| Safety sensor repair or replacement | $220 – $480 |
| Weld repair on steel gate frames | $180 – $520 |
| Manual driveway gate installation | $1,400 – $4,300 |
| Automatic gate installation | $3,700 – $9,200 |
| Sliding gate installation | $4,100 – $10,200 |
What pushes Crandall prices toward the high end is usually the soil: a post that has to be pulled, a deeper concrete pour for a gate on heaving clay, or track work re-done because the ground shifted. Every quote is written and agreed before we start, so the number you approve is the number you pay.
Neighborhoods We Serve in Crandall
We cover all of Crandall’s 75114 zip code, from the rural acreage tracts east of town to the newer subdivisions and the mixed residential pockets closer to the city center. Same-day and next-day scheduling is generally available across the area, and emergency gate failures take priority on the calendar.
- Rural acreage tracts east of FM 148 toward Kaufman County line
- Subdivisions along US 175 and west toward Combine
- Older ranch-style lots near downtown Crandall
- Newer brick tract developments built out during the recent growth spurt
- Manufactured home communities and multi-acre parcels north toward Seagoville
Service Area – Cities Near Crandall
Bastion Gate Repair runs service calls from Crandall into the surrounding Kaufman and Dallas County communities. For gate work in Combine, TX, we’re often on-site within the same day. We also cover Seagoville, TX to the north, Forney, TX to the northeast, and Travis Ranch, TX to the west. If you’re on the edge of any of these service areas, call us and we’ll confirm coverage.
Serving Crandall, TX — Our Local Coverage Area
We’re based in the Crandall area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Crandall
Emergency calls take priority, and a gate that won’t secure a property is treated as urgent. Same-day dispatch is typically available in the 75114 area, and we schedule non-emergency repair work within one to two business days. Call (866) 321-6117 and tell us whether the gate is stuck open, stuck closed, or intermittent.
Some of Crandall’s newer subdivisions have HOA architectural guidelines that govern gate style, height, and setback, and rules vary by development. We can work from your HOA’s spec sheet or install to a standard that won’t cause problems if you’re outside a deed-restricted neighborhood. Rural acreage properties generally face no gate permit hurdles beyond any county setback rules that apply.
Yes. Our trucks carry welding gear, gate hardware, operator parts, and diagnostic tools for both manual and automatic systems, so one Crandall service call can handle an electric driveway gate and a pipe-and-wire pasture gate without a second trip charge. Tell us everything that needs attention when you schedule.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Crandall Customers Say
"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Andre Coleman"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Jerome Ingram"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Greg Parker