Farm & ranch
Wrought iron
Wood & steel frame
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Travis Ranch, TX
Gate installation in Travis Ranch usually starts with one question: will the new gate match what the HOA approved back when the neighborhood was built? Most homes here went up in waves from the early 2000s on, and many of the original decorative driveway and courtyard gates are now 10 to 20 years old, with hinges, operators, and frames wearing out at similar rates. North Texas blackland clay shifts with every wet-dry season, so posts move, gates sag, and operators lose alignment. That combination means Travis Ranch gate work is less about swapping parts and more about understanding how each section of the community was originally built. Call Bastion Gate Repair at (866) 321-6117 when you need a straight answer about repair or replacement.
Why Travis Ranch Homes Are Different
Travis Ranch is a master-planned community in Forney, Kaufman County, ZIP 75126, where gate decisions often run through an HOA. That changes the job. A replacement decorative metal driveway gate can’t just be any style – it typically has to match the community-approved look, finish, and color for that section. Repair jobs frequently come down to knowing the developer’s original gate specs rather than installing generic hardware that an HOA inspector will flag.
And because Travis Ranch was built out in phases by different builders under shared architectural standards, two neighboring houses can have nearly identical gates with different hinge styles and operator brackets. The repair that worked two doors down may not fit your gate at all. Add seasonal movement from expansive clay soil, plus summer heat and spring wind and hail, and you get operators that strain, hinges that bind, and posts that heave just enough to throw a swing gate off level. Technicians who work this area regularly see those patterns. They know to check post plumb and operator alignment first, before replacing parts that are still serviceable.
The age of the housing stock matters too. Homes built in the 2000s and later are reaching the point where original gate operators – LiftMaster, FAAC, Mighty Mule, and others installed by builders – are hitting end of life at roughly the same time. A technician who knows Travis Ranch will recognize the original builder packages and can often source direct-fit replacements instead of reshaping brackets and welding new plates.
Styles & brands we work with
Our Main Travis Ranch Services
Most calls we handle in Travis Ranch fall into two categories: mechanical gate failures and electric or automated gate problems. Here’s how each works.
Gate Repair in Travis Ranch
Gate repair here usually means a sagging swing gate, a binding slide track, a broken hinge, or a wheel that’s chewed up from years of clay-soil movement. We start by checking post plumb and frame alignment, because in Travis Ranch the ground moves and the gate follows. Then we address the hardware: hinges, brackets, racks, wheels, and stops. We work on decorative wrought-iron and aluminum gates as well as common-area fencing. For the full breakdown of mechanical gate repairs in Travis Ranch, see Gate Repair in Travis Ranch.
Electric Gate Repair in Travis Ranch
When an automated gate opens but won’t close, or hums without moving, the problem is usually in the operator, the logic board, a sensor, or a loop detector. Travis Ranch’s heat and storm cycles shorten the life of control boards, and power surges after spring storms keep us busy resetting and replacing them. We diagnose electric systems across LiftMaster, FAAC, Viking, Ghost Controls, and other brands rather than defaulting to full replacements. For a complete look at automated gate diagnosis and repair, visit Electric Gate Repair in Travis Ranch.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Travis Ranch
Gate installation in Travis Ranch means matching the community’s architectural standards while building a gate that survives North Texas clay soil and storm seasons. Homes here are mostly 2000s-and-later builds, so many original gates are reaching the end of their service life at the same time their operators are failing – and replacing the gate without checking HOA requirements usually means doing the job twice. A proper installation starts with understanding the section’s approved styles and materials, then building from correctly set posts and a properly aligned operator mount so the gate doesn’t fight the soil from day one. Bastion Gate Repair handles the full Gate Installation process from removal of the old gate to final operator tuning.
Automatic Gate Installation
Signs you need it
Your current gate opens and closes manually, or the old operator has died and the gate sits half-open, defeating the point of perimeter control.
What it costs in Travis Ranch
Automatic gate installation in Travis Ranch typically runs $4,500 to $13,500, depending on gate size, operator type, and access control hardware.
How we do it
We set or reinforce posts, mount the new gate, install the operator and safety sensors, wire power, and test full open-close cycles under load before we leave.
Driveway Gate Installation
Signs you need it
The existing driveway gate is corroded, sagging beyond adjustment, or no longer matches your section’s HOA-approved styles.
What it costs in Travis Ranch
Driveway gate installation in Travis Ranch typically runs $6,000 to $20,500, with material and style choices driving most of the spread.
How we do it
We pull the old gate, set plumb posts in concrete, hang the new gate, adjust swing or slide travel, and align the operator so the gate moves cleanly through its full range.
What Gate Installation Costs in Travis Ranch
| Item | Typical range in Travis Ranch |
|---|---|
| Automatic gate installation | $4,500 – $13,500 |
| Electric gate installation | $4,700 – $14,000 |
| Driveway gate installation | $6,000 – $20,500 |
Do I need HOA approval for a new gate in Travis Ranch?
Yes, in most Travis Ranch sections you’ll need architectural review for a replacement driveway or courtyard gate. We can help you document the existing style, material, and color so your application matches what the HOA expects.
How long does a gate installation take in Travis Ranch?
Most single driveway gate installations take one to two days, including old gate removal, post work, and operator setup. HOA approvals and custom fabrication can add lead time before the install date. Call (866) 321-6117 and we’ll give you a written timeline.
Brands We Service in Travis Ranch
We service Viking, Ghost Controls, DoorKing, and Elite systems, along with five other major brands you’ll find on Travis Ranch properties. Our technicians carry common control boards, sensors, and operator parts for these brands, which keeps many repairs to a single visit. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Travis Ranch, TX
| Service | Typical range in Travis Ranch |
|---|---|
| Gate repair service call | $60 – $120 |
| Gate opener repair | $185 – $600 |
| Gate hinge replacement | $125 – $400 |
| Gate wheel replacement | $125 – $300 |
| Electric gate repair | $185 – $700 |
| Gate sensor repair or replacement | $125 – $550 |
| Gate opener installation | $450 – $2,000 |
| Automatic gate installation | $4,500 – $13,500 |
| Electric gate installation | $4,700 – $14,000 |
| Driveway gate installation | $6,000 – $20,500 |
In Travis Ranch, two things push gate prices higher than the regional average. First, HOA-approved materials and finishes can cost more than stock options. Second, clay-soil movement often means additional post work – digging deeper, pouring more concrete, or adding steel reinforcement – before a gate can hang straight. Every job we quote includes a line-by-line price agreed before any work starts, so the invoice matches the quote.
Neighborhoods We Serve in Travis Ranch
We work across Travis Ranch’s subdivisions, including the older sections where original gates are failing together and the newer phases where owners are upgrading to automated systems. We know the HOA expectations in each area and the builder packages that went in originally.
- Travis Ranch Phases 1-3
- Travis Ranch North
- Travis Ranch South
- Travis Ranch Estates
- Travis Ranch Commons area
Most Travis Ranch gate service calls can be scheduled within 24 to 48 hours, with emergency repair availability for gates that won’t close and are leaving a property unsecured.
Service Area – Cities Near Travis Ranch
Bastion Gate Repair serves Travis Ranch and the surrounding Kaufman County and eastern Dallas County communities. If you’re in a neighboring city, we can help there too. We regularly handle gate repair and installation in Forney, TX, Sunnyvale, TX, Combine, TX, and Crandall, TX. Same team, same brand-agnostic approach.
Serving Travis Ranch, TX — Our Local Coverage Area
We’re based in the Travis Ranch area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Travis Ranch
For a gate that won’t close or a property that’s unsecured, we prioritize emergency calls and can usually reach Travis Ranch within 24 to 48 hours, often sooner depending on the schedule. Call (866) 321-6117 and we’ll tell you the next available slot.
Most Travis Ranch gate replacements require HOA architectural approval, and Kaufman County may require a permit depending on scope and whether new electrical runs are involved. We’ll walk you through which approvals apply to your specific project before any work begins.
Yes. We’ve installed and repaired gates across Travis Ranch’s HOA-governed sections and we’re familiar with the community’s architectural standards. We can match existing styles, finishes, and hardware so your replacement clears review without revision cycles. Call (866) 321-6117 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Travis Ranch Customers Say
"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Jodi Walsh"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Rachel Doyle"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Lucia Martinez