Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Combine, TX
Gate installation in Combine, TX means building for acreage, not curbside appeal. Most properties out here off FM 1389 and the surrounding Kaufman County roads use long-span pipe or ornamental steel gates that open to pasture, equipment access, or a long driveway to a custom home. The clay soil shifts with every wet-dry cycle, the wind loads are real, and an underbuilt post or an undersized operator fails early. Bastion Gate Repair has served Combine since 2012, and we plan every install for that reality. Call (866) 321-6117 when you need a gate that holds its line in North Texas ground.
Why Combine Homes Are Different
Combine’s housing stock is not row after row of HOA subdivisions. It is custom homes on multi-acre lots, manufactured homes, and working ranch properties. Gates here get mounted on long spans, often welded steel or pipe-rail farm gates the builder or a previous owner set themselves. That is where the trouble starts. Undersized posts in expansive clay are the single most common install defect we correct. North Texas black clay swells when it rains and contracts in hard summer heat. A post that looked plumb in April can lean six degrees by August, dragging the gate leaf across the drive.
Add spring severe weather with straight-line winds and you get panels racked out of alignment and hinges bound tight. For Combine specifically, a gate is usually the primary access point for vehicles, trailers, and livestock. When it will not open, you are not parked on the street calling an HOA – you are stuck at your own property line. That is why we treat every Combine installation as a perimeter-control job first and a cosmetic one second. Post depth, concrete footing, gate weight, and opener duty cycle all get engineered for this soil and this weather.
Styles & brands we work with
Our Main Combine Services
Combine homeowners call us about two things more than anything else: a gate that physically will not swing or slide, and an electric system that stopped responding. Here is how each works out here.
Gate Repair in Combine
Mechanical gate repair in Combine usually starts at the hinge or the post. Long pipe gates exert enormous leverage on hardware, and when clay soil heaves, that leverage goes where it should not. We reset leaning posts, replace seized hinges, cut and re-weld racked frames, and re-level gates that drag by late summer. Many Combine gates were builder-installed, which means mismatched hardware and thin-wall posts are common. We repair them to stay put through the next wet-dry cycle. For a full breakdown of mechanical gate work, see our Gate Repair in Combine page.
Electric Gate Repair in Combine
Electric gate failures in Combine tend to follow the storms and the heat. Lightning and power surges take out logic boards. Summer heat pushes undersized openers past their duty rating. And because many acreage gates swing on long, heavy leaves, the operator that worked fine on a suburban driveway cooks itself out here. We diagnose the whole system: opener, sensors, loop detectors, keypads, and wiring. Repair before replace, whenever the equipment still has life. Details are on our Electric Gate Repair in Combine page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Combine
Gate installation in Combine is a footing-and-steel job before it is an opener job. The black clay here heaves and shrinks with every season, so the difference between an installation that lasts fifteen years and one that fails in three is how deep the posts are set and how the frame is braced. Most properties are long-lot rural driveways where the gate is the only vehicle access point, often with a livestock or pasture component. We build for that. For a deeper look at the full installation process, see our Gate Installation service hub.
Automatic Gate Installation
Signs you need it
You are opening and closing a heavy gate by hand multiple times a day, and the time lost is costing you more than an opener ever will.
What it costs in Combine
Automatic gate installation in Combine typically runs $2,500 to $8,500 depending on gate weight, opener duty cycle, and access control add-ons.
How we do it
We spec the operator to the actual gate weight and daily cycle count, set the pad and conduit, mount and wire the opener, then calibrate force limits, travel limits, and safety edges.
Driveway Gate Installation
Signs you need it
Your driveway opens straight onto an FM road, and you want controlled access for privacy, livestock containment, or security.
What it costs in Combine
A driveway gate installation in Combine usually lands between $1,900 and $7,500 depending on gate material, span, and whether automation is included.
How we do it
We measure the drive opening, check the soil and drainage, pour footings below the clay heave line, then hang and align the gate leaf so it clears in every season.
Sliding Gate Installation
Signs you need it
Your driveway slopes or your gate span is too wide for a swing leaf without a massive footprint.
What it costs in Combine
Sliding gate installation in Combine typically runs $2,800 to $9,000 for the track, gate panel, and motor depending on span and operator horsepower.
How we do it
We pour a level track bed, set the rail and supports, hang the panel, then mount and tune the slide operator to move the gate smoothly under load.
What Gate Installation Costs in Combine
| Item | Typical range in Combine |
|---|---|
| Single driveway gate, no automation | $1,900 – $5,000 |
| Automatic opener added to existing gate | $2,500 – $6,500 |
| Full automatic gate system (gate + operator + keypad) | $4,500 – $8,500 |
How long does a new gate installation take in Combine?
Most Combine installations run one to three days. Custom gates that need welding take longer, and wet clay ground can delay footing work a day or two. We tell you the schedule before we start.
Do you handle the power run and the safety edges?
Yes. We handle the full electrical scope for automated gates: conduit, wiring, a dedicated circuit, operator connections, photo-eye safety edges, and loop detectors. Call (866) 321-6117 for a specific quote on your driveway.
Brands We Service in Combine
We work on Viking, Ghost Controls, DoorKing, and Elite systems, among others. We stock common replacement parts for all four on our trucks, which keeps most Combine repairs to a single visit. See our brands for the full list and what we support.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Combine, TX
| Service | Typical range in Combine |
|---|---|
| Gate post reset or re-level | $350 – $1,100 |
| Hinge replacement on heavy steel gate | $250 – $700 |
| Gate frame racking repair and re-weld | $400 – $1,400 |
| Electric gate diagnostic and logic board replacement | $350 – $1,200 |
| Loop detector replacement | $300 – $800 |
| Keypad or access control repair | $200 – $650 |
| Automatic opener installation (existing gate) | $2,500 – $6,500 |
| Full automatic gate installation | $4,500 – $8,500 |
In Combine, what pushes a price up is usually the gate itself: heavy pipe steel, long spans, and posts set in heaving clay. Everything we quote is agreed before we turn a wrench, and you will never see an invoice bigger than the number you approved.
Neighborhoods We Serve in Combine
We cover all of Combine, ZIP 75114, from the FM 1389 corridor to the ranch roads branching east and south toward Crandall and Seagoville. Most jobs are on large-lot or acreage properties, and we plan our routes to keep drive time from DeSoto efficient. Typical response for non-emergency calls is within one to three business days, with emergency gate-down calls prioritized same-day when we have a crew available.
- Rural lots off FM 1389
- Kaufman County acreage east of Combine
- Properties near the Combine city limits line
- Ranch roads branching toward Crandall
- Lake-country access properties off the FM roads
Service Area – Cities Near Combine
Bastion Gate Repair works across the southeastern Dallas – Fort Worth edge, and Combine sits close to several communities we serve regularly. We handle jobs in Crandall, TX, Seagoville, TX, Forney, TX, and Travis Ranch, TX. If you are on the county line or not sure which service area you fall in, call us and we will tell you straight.
Serving Combine, TX — Our Local Coverage Area
We’re based in the Combine area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Combine
We prioritize gate-down calls where the gate is blocking vehicle access or livestock is loose. From our DeSoto location, we can usually reach Combine within an hour in an emergency, and we will tell you on the phone when to expect us. Call (866) 321-6117 and we will give you a straight answer.
Most rural gate installations in Combine on private property do not require a county permit, but any gate within a road right-of-way or drainage easement may. We check setback and easement lines before any installation and flag anything that needs local approval.
Yes. Many Combine properties have horses, cattle, or other animals that need controlled access while we work. We plan temporary fencing or sequenced gate swaps so livestock stays contained and the job still gets done on schedule. Tell us what you are managing when you call.
If your gate is leaning, dragging, or completely down, Bastion Gate Repair is ready for the soil, the heat, and the demands of Combine. Call (866) 321-6117 for a free estimate, and we will quote the price before any work starts.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Combine Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Jerome Ingram"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Greg Parker"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Luis Rodriguez