Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Highland Park, TX | Bastion Gate Repair
We repair Ghost Controls gate operators across Highland Park, and we do it as an independent service provider, not a manufacturer warranty line. That matters here more than in most places. In Highland Park, Ghost Controls operators sit behind masonry piers, long wire runs, and custom iron gates set back from the street, and the failures we see have more to do with soil, heat, and wiring length than with the operator itself. If your gate won’t open, won’t close, or only moves halfway, call us at (866) 321-6117 and we’ll diagnose the actual fault, not guess at it.
Why Highland Park Residents Choose Us for Ghost Controls Service
We’ve provided Ghost Controls sales & service across Highland Park’s estate gates for years, and we know exactly which parts of those operators fail first in this climate. The control boards. The battery backup. The limit switches on the tube arms. We don’t sell Ghost Controls units, so we have no reason to steer you toward a replacement you don’t need. Our recommendation is based on what’s actually wrong with your gate.
Brent Calloway runs the service side of Bastion Gate Repair, and he’s been rebuilding gate systems in North Texas long enough to have seen every way heat and clay soil can beat up an opener. He’ll tell you a gate that’s “held together by optimism and zip ties” is common around here, and he’ll show you what the right fix looks like, whether that’s an OEM control board, a re-set post, or a new set of arm brackets. We also service LiftMaster, FAAC, BFT, Linear, Viking, DoorKing, Elite, and Mighty Mule, but if you need Ghost Controls service in Richardson or nearby, this is the page you need.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in Highland Park
These are the patterns we see week after week on Highland Park driveways:
- Control boards failing from post shift and heat. When the clay soil under a strike post shifts, the gate binds. The motor works harder. In a Highland Park August, that overcurrent cooks a Ghost Controls board fast. We replace the board and fix the post so it doesn’t burn the next one.
- Battery backups that won’t hold a charge. Ghost Controls battery packs degrade after two or three North Texas summers of 100-degree days. The gate runs fine on wall power, then dies the moment a storm knocks out electricity. We test the pack under load and swap it when it’s gone.
- Arm brackets and limit switches loosening at the welds. Ornamental iron gates rust at weld joints around Highland Park, and that stress transfers to the operator mounting points. Tube-style Ghost Controls arms start to drift, gate travel gets sloppy, and limit switches read wrong. We re-torque, re-align, and repair the casing.
- Keypads and receivers losing programming after hail. Severe spring storms and hail don’t just bruise cars in Highland Park. They surge the low-voltage side of a gate system, and Ghost Controls keypads and remote receivers drop their programming. We re-flash, replace surge-damaged wiring, and get your codes working again.
- Long wire runs causing voltage drop. Estate gates set behind hedges and masonry piers in Highland Park often have keypad and intercom wire runs of 60 feet or more. Voltage drop makes boards behave erratically. We measure the draw, correct the run, and add a relay where needed. This is a Highland Park-specific failure pattern, and we know how to spot it.
Ghost Controls Service in Highland Park: What Local Conditions Mean for Your Equipment
Our Highland Park service area isn’t a typical suburban gate market. Drive down Beverly or Lexington and you notice the gates sit back, framed by mature hedges, stone piers, and custom ironwork that the town’s aesthetic review expects to remain pristine. That setback is the reason so many Ghost Controls operators here run long conductor runs to keypads, intercoms, and photo eyes. The longer the run, the more voltage drops, and the more vulnerable the control board is to lightning-induced surge during a spring storm. We carry this in mind from the first diagnostic: we check the board, we check the battery, and we check the wire path and post alignment. After a dry stretch followed by heavy rain, the black clay along streets like Beverly shifts enough to bind a gate that was perfectly balanced the month before. If your Ghost Controls operator is failing, it may not be the operator at all. That’s the difference between a board swap and a repair that actually holds.
Ghost Controls Models & Products We Service in Highland Park
We provide Ghost Controls repair in Dallas for the Heavy-Duty Single Swing (TDS series), the Dual Swing operators (TD2 series), and the Solar-Compatible Swing Operator Kits that appear on estate lots without a convenient power source. For units under five years old with intact housings, we use OEM Ghost Controls control boards, arms, and receivers. When a unit is older or the OEM part is backordered, we source quality aftermarket equivalents that meet or exceed OEM specs. We don’t push a full operator replacement if a board, battery, or arm swap will restore reliable cycling. On the parts we use most for Highland Park work, we keep common control boards and battery packs on the truck so we’re not making you wait another week.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Highland Park
What you’ll pay depends on what’s actually failed. Here’s what to expect in the Highland Park market.
- Diagnostic service call: typically $89 to $139, waived if you proceed with the repair
- Control board replacement (OEM or premium aftermarket): $240 to $480 installed
- Battery backup replacement: $140 to $280 installed
- Limit switch, arm bracket, or receiver repair: $120 to $300
- Post re-set and gate realignment on shifting clay: $300 to $700
- Full operator replacement (labor included): $1,200 to $2,600
Every repair is priced and agreed to before we begin. No open-ended invoices. Estimates are free, and Brent will explain what’s failed, why it failed, and whether a repair or a replacement makes more sense for your gate’s condition and your property’s security posture. For an exact quote on your Ghost Controls system in Highland Park, call (866) 321-6117.
Serving Highland Park, TX — Our Local Coverage Area
We’re based in the Highland Park area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Highland Park
Yes. Surge damage is the most common reason a Ghost Controls board quits after a Highland Park hail or lightning storm. We inspect the board, transformer, and surge path, replace the damaged component, and add inline surge protection where it makes sense. Most surge-related failures are repairable without replacing the whole operator. Call (866) 321-6117 and we’ll walk through the symptoms.
Rarely. If the control board and motor are sound, we replace the battery pack. Ghost Controls packs typically age out after a couple of Highland Park summers. The fix runs roughly $140 to $280, far less than a new operator. We’ll load-test the old pack so you know it’s truly dead before we replace it.
Only if we fix both. A gate that drags or binds puts mechanical stress on the operator, and that stress is usually what kills the board or arm in the first place. In Highland Park, dragging typically comes from clay soil shifting posts and hinges. We re-set the post or re-level the tracks and repair the operator, or the new board will burn out the same way. Call (866) 321-6117 and we’ll inspect both sides of the problem.
Yes. We run new keypads, intercoms, and vehicle exit sensors through existing Ghost Controls terminals. On Highland Park estates with long runs from the house or street, we size the wire and add relays so the board sees clean voltage and the new accessory works reliably. We’ll also check the transformer load so the extra accessory doesn’t starve the operator.
All the time. This is actually the majority of our Ghost Controls work in 75205. These installs combine long wire pulls, ornamental iron, and tight clearance around stone piers, and they fail differently than a standard suburban gate. We’re comfortable working in those constraints and matching repairs to the gate’s existing ironwork. Call (866) 321-6117 and describe what your gate is doing; we’ll tell you what it needs.
Service Areas Near Highland Park
We also handle Ghost Controls service in nearby DeSoto, Duncanville, Cedar Hill, Glenn Heights, and Oak Leaf. See more at Ghost Controls service in Arlington or Ghost Controls service in University Park.
Book Your Ghost Controls Service in Highland Park Today
If your Ghost Controls gate in Highland Park won’t open, won’t close, or is eating boards, call us now at (866) 321-6117. We keep Highland Park jobs moving fast and we’ll get your gate closing tight again. Estimates are free.
Written by Brent Calloway, Owner at Bastion Gate Repair, serving Highland Park and the surrounding North Texas communities for close to two decades.