Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Highland Park
Gate repair in Highland Park usually means one of two things: a swing gate that’s binding on shifted posts, or an operator that gave up after a spring storm. Most calls we take from the 75205 area code are scheduled and fixed within one to two business days, and we carry the hinges, boards, and receiver parts for the brands most common on Beverly, Lexington, and Armstrong. If your gate won’t close, sags at the latch, or grinds when the opener runs, call us at (866) 321-6117. We’ll tell you what the system actually needs, not what’s fastest for us to bill.
Why Bastion Gate Repair Is Highland Park’s Preferred Gate Repair Company
Highland Park gates are not off-the-shelf. They’re custom cedar, heavy wrought iron, and cast stone built to match the house behind them. When one fails, you don’t need a handyman with a drill and a generic bracket. You need someone who knows why a LiftMaster arm strains against a bound hinge post, and what to do about it.
Brent Calloway built Bastion Gate Repair around that exact problem. Our technicians work on virtually every major gate brand, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters in Highland Park because the hardware on an estate gate is often a mix: a Viking operator driving a custom iron panel, or a Ghost Controls kit adapted to a cedar double leaf. We diagnose the system, not just the symptom.
We field calls from Highland Park homeowners, property managers, and HOA board members every week. The common thread is urgency. A gate that won’t close is a security gap, not just an inconvenience. Our Gate Repair team treats it that way, and we quote the work before we start. No one in this trade should hand you a surprise invoice.
Styles & brands we work with
Commercial Gate Repair in Highland Park
Commercial Gate Repair in Highland Park covers automated entry gates at estates, private drives, and the rare small commercial courtyard or gated residential compound. The work is different from a single-family repair because the hardware sees more cycles per day and the access control side, keypads, intercoms, vehicle loop detectors, is usually integrated with the operator. When a commercial gate fails, we check the full chain: operator, board, sensors, hinges, post alignment, and power feed.
Typical commercial gate repair in Highland Park runs $450 to $2,400 depending on whether we’re replacing an operator arm, rebuilding a post footing, or rewiring a loop detector and access panel. A failed logic board on a commercial operator can be $600 to $1,200 by itself. We give the written price before any work starts.
Operator and Access Control Repairs
We replace and program operators from LiftMaster, FAAC, BFT, and DoorKing, and we troubleshoot access control wiring without defaulting to full replacement. If the loop detector won’t pick up a vehicle or the keypad intermittently drops the intercom, we trace the actual fault. Repairing a board or a sensor is usually faster and cheaper than swapping the whole system.
Post and Hinge Rebuilding
Commercial gates in Highland Park are usually heavier and wider than residential panels, so a shifted post shows up quickly as a gate that scrapes the ground or won’t latch. We cut out failed footings, re-set posts true, and weld or fabricate replacement hinge plates to match the existing steel. A commercial hinge rebuild on a 16-foot gate typically runs $800 to $2,000 including concrete work.
Iron Gate Repair in Highland Park
Iron Gate Repair in Highland Park tends to be about ornament, not just function. The wrought iron on these streets is often original to the house or custom fabricated to match the façade, so homeowners care whether a repair shows. We weld, grind, and finish repair sections to blend with the original scrollwork, railings, and latch hardware. Rust at the weld joints is the quiet killer on these gates, especially after hail stands water in the low seams.
Cost for iron gate repair in Highland Park runs $300 to $1,500 for typical secton work. A full re-set of a sagging iron gate with post re-leveling is $800 to $2,200. If the lower rail has rusted through and needs replacement, that’s usually $500 to $1,200 depending on the ornamentation. We quote the exact number before we touch the gate.
Rust Repair and Ornamental Matching
We replace rusted-through lower rails, rebuild cracked scroll welds, and replicate bent pickets. Where the original finials or cast details are damaged beyond repair, we source or fabricate replacements rather than charging for a full panel. A gate that matches the house is the standard here, and we treat it that way.
Realignment and Post Setting
After a drought or a week of rain, the black clay under a Highland Park iron gate moves. The gate doesn’t look damaged, but it won’t close cleanly. We re-set the post footing, re-level the gate, and re-square the frame before touching the hinges or operator. That’s the difference between a repair that lasts and one that gets called back in three months.
Trusted Brands We Service in Highland Park
We stock or can source parts locally for Viking, Ghost Controls, DoorKing, and Elite systems, along with LiftMaster, FAAC, BFT, Linear, and Mighty Mule. Highland Park gates are rarely one brand from end to end, so we carry adapters, arms, boards, and receivers that let us fix a mixed system without waiting a week on a factory part. If your gate runs a Ghost Controls kit on a custom cedar panel with a DoorKing keypad, one call covers it. From Mighty Mule to FAAC, residential to commercial, Highland Park gates are what we work on every day.
Common Gate Repair Problems We See in Highland Park Homes
- Clay-soil post shift: Black clay under Highland Park swells after rain and shrinks in drought. Posts along Beverly and Lexington move just enough to bind a swing gate with no visible damage to the gate itself.
- Wind load on solid infill panels: Solid cedar and wrought-iron gates catch spring storm wind like a sail. The hinge post twists out of plumb, the gate sags, and the operator arm starts straining against the bind.
- Freeze-thaw cracking at piers: Masonry and cast-stone piers on older estates absorb winter moisture, then crack when it freezes. The gate still works but the pier starts leaning and the hinge bolts loosen.
- Operator burnout from bound gates: When a gate binds, the operator keeps pushing until the motor or the limit logic fails. Homeowners think the opener is dead, but half the time the real problem is a shifted post or a sagging panel loading the arm.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Highland Park, TX
Gate repair in Highland Park typically runs $250 to $2,400 depending on what failed. A simple hinge replacement or latch adjustment is $250 to $500. Re-setting a shifted post with realignment is $800 to $2,200 depending on footing work. Operator replacement, including the arm and reprogramming, is $700 to $2,400. Rust repair and ornamental matching on iron gates falls between $300 and $1,500. What affects the price is the weight of the gate, access to the post, and whether we’re matching existing ornamental work. Estimates are free, and the price we quote is the price you approve before any work starts. Call (866) 321-6117 for a written number.
We Also Serve Cities Near Highland Park
Our crews serve Highland Park and the surrounding North Dallas corridor, including Dallas, University Park, Richardson, and Irving. If your property sits just outside the 75205 boundary, we still cover it. Call (866) 321-6117 and we’ll confirm the schedule.
Serving Highland Park, TX — Our Local Coverage Area
We’re based in the Highland Park area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Highland Park
In Highland Park it’s usually the posts, not the hinges. The black clay under the footing swells after a heavy rain and shifts the post, which throws the gate out of square. We check the post with a level before we touch hardware. Hinge wear on a properly set gate is rare; a bound gate after rain is a footing problem.
Every automatic gate has a manual release, usually a keyed handle on the operator body or a pull chain on the carriage. Turn the key or pull the release, and you can push the gate by hand. Do not force the gate if the hinge post is bound, you can twist the gate frame. Call us at (866) 321-6117 and we’ll get the operator set back up after power returns.
Yes, significantly more. A solid cedar or iron panel acts like a wall when Highland Park spring storms come through, and the wind load transfers directly to the hinge post and the operator. We set posts deeper and use heavier hinge plates on solid infill gates than what a kit gate requires. If yours is already sagging after a storm, the post is likely out of plumb.
In most cases, yes. We repair and replicate sections rather than replacing whole panels. For wrought iron we weld and grind to match the original scrollwork and finish. For cedar we match the species, profile, and hardware. Highland Park gates are rarely replaceable off-the-shelf, so matching is the default, not a specialty add-on.
Every automatic gate should have working photocell sensors at the open and close edges, plus a reversing mechanism that stops and reverses the gate if it contacts an obstruction while closing. We test both on every repair. If yours doesn’t reverse under light pressure, the safety circuit needs attention now, not later. Call (866) 321-6117 and we’ll check it.
Highland Park’s Clay Soil and Storm Wind Change How We Repair Gates
Highland Park’s black clay soil moves enough between summer drought and heavy rain that gate posts along streets like Beverly and Lexington regularly shift just enough to bind a swing gate, often with no visible damage to the gate itself. That means a Highland Park gate repair often starts by re-setting the post footing and re-leveling the track rather than touching hinges or the operator. A generic repair shop might slap a new hinge on and call it done. We know better.
After a spring hail-and-wind storm on Lexington, a cedar swing gate with a LiftMaster operator wouldn’t fully close. The panel had dropped, and the operator arm was straining against the bound hinge post. We pulled the post footing, re-set it true, corrected the sag, checked the safety photocells, and reset the limits before handing back the remotes. The gate has tracked cleanly since. That is what most Highland Park repairs actually look like.
Call Bastion Gate Repair for Gate Work in Highland Park
If your gate is binding, sagging, rusting, or the operator won’t respond, call (866) 321-6117. We’ll get a technician to your Highland Park property, diagnose the real problem, and give you a written price before any work begins. Free estimates, straightforward repair or replacement advice, and the brands we service cover virtually every system on these streets.
Written by Brent Calloway, Owner at Bastion Gate Repair, serving Highland Park and the surrounding North Dallas area.