Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Richland Hills, TX
Gate installation in Richland Hills usually means one of two jobs: replacing a decades-old driveway gate on a 1950s or 1960s ranch home, or adding an automated gate to a yard that was never built for one. Most of the homes here sit on tight lots with mature trees, so post placement, swing clearance, and setback rules matter more than they would in a newer subdivision. We’re Bastion Gate Repair, and we’ve handled both the retrofit and the full replacement side of that work since 2012. Call (866) 321-6117 if you want a straight answer about your gate.
Why Richland Hills Homes Are Different
Richland Hills is a fully built-out inner-ring Mid-Cities suburb, and that changes the work in ways you won’t see in newer parts of Tarrant County. The housing stock is mostly 1950s through 1970s single-family ranches, and many of those homes still have their original steel gate posts set directly into the local expansive clay. Over the decades, seasonal wet-dry cycles shift that clay enough to pull posts out of plumb. A gate that swung cleanly at installation now clips the ground or hangs against the latch post every July.
The lots are small, which means most driveway gates sit close to the house and close to the property line. That makes every install neighbor-sensitive: setbacks, fence-line alignment, and the height and swing direction of the gate can all draw HOA attention in the older subdivisions. The city also permits driveway gates and fence lines, so any new installation has to survive a code review, not just the installation day. Wood gates swell through humid summers and sag; hinges and posts take a beating from wind and ground movement. None of this is exotic. It is just what Richland Hills does to gates, and it is why the retrofit work here is as much about the post and the soil as it is about the operator.
Styles & brands we work with
Our Main Richland Hills Services
Two service calls dominate the work we do across Richland Hills, and they lead with very different problems.
Gate Repair in Richland Hills
Gate repair in Richland Hills is mostly retrofit work on aging wood and ornamental metal gates that have been in service since the Reagan administration. We see sagging wood gates that no longer latch, steel posts that have shifted in the clay, and hinges that have seized from years of North Texas heat. The fix is usually component-level, not a full replacement: re-setting a post, re-hanging a gate, replacing a hinge barrel, or straightening a frame. Read more on our dedicated Gate Repair in Richland Hills page.
Electric Gate Repair in Richland Hills
Electric gate repair here often starts with a system that worked for fifteen years and then stopped overnight. Openers mounted on shifting posts go out of alignment, circuit boards fail after power surges, and loop detectors stop reading the car in the driveway. We diagnose the system, not just the symptom, and we work across residential and commercial operators, access control, and loop systems. Full detail is on the Electric Gate Repair in Richland Hills page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Richland Hills
Gate installation in Richland Hills is rarely a blank-slate job. The older ranch homes and fully built-out lots mean most new gates go where an old gate already stood, which matters a lot: the existing post footings may be undersized, the gate may need to meet current city setback and height rules, and the new operator may need a power run that was never part of the original build. The most common job we do is replacing a swinging wood or ornamental driveway gate with a new steel-frame gate and a modern opener, while preserving as much of the existing fence line as the lot will allow. We also handle full electric gate systems from the post up. You can see the scope of our work on the main Gate Installation page.
Automatic Gate Installation
Signs you need it
You’re getting out of the car to open and close a gate you use every day, or you want the perimeter closed without standing in the rain to make it happen.
What it costs in Richland Hills
Automatic gate installation in Richland Hills typically runs $2,500 to $8,500 installed, with the spread driven by gate size, opener class, and whether power already exists at the post.
How we do it
We pull the existing gate and posts if needed, set new posts in properly sized footings, mount the gate, then install the operator, power run, safety edges, and loop or sensor controls, and run the full travel cycle before we sign off.
Driveway Gate Installation
Signs you need it
The old gate is sagging past repair, the post has moved far enough that the gate no longer latches squarely, or you’re replacing a fence line and want the driveway opening to match it.
What it costs in Richland Hills
Driveway gate installation in Richland Hills generally falls between $2,500 and $8,500 installed, and a basic gate without automation starts lower within that range depending on width and material.
How we do it
We measure the actual opening and swing clearances, remove the old gate and posts, set new steel posts in concrete sized for the soil, hang the new gate, and adjust the hinges and latch so the gate closes square on day one with room for seasonal movement.
What Gate Installation Costs in Richland Hills
| Item | Typical range in Richland Hills |
|---|---|
| Automatic gate installation | $2,500 – $8,500 installed |
| Driveway gate installation | $2,500 – $8,500 installed |
| Full gate system with operator and access control | $2,500 – $8,500 installed |
Do I need a permit for a driveway gate in Richland Hills?
In most cases, yes. Richland Hills reviews driveway gates and fence lines, and some older subdivisions add HOA rules on top of the city’s code. We confirm what applies to your address before work starts.
Can you reuse my existing posts for a new gate?
Sometimes, but in Richland Hills the clay usually has other plans. If the post is plumb, solid at the base, and the right size for the new gate’s weight, we reuse it; if it’s shifted even an inch, a new gate will never hang right on it. Call (866) 321-6117 and we’ll tell you which situation you have.
Brands We Service in Richland Hills
We work on virtually every major gate brand, including Viking, Ghost Controls, DoorKing, and Elite. Most common parts live on our trucks, and for the brands we service regularly, turnaround on control boards and operator components is measured in days, not weeks. See the full scope on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Richland Hills, TX
| Service | Typical range in Richland Hills |
|---|---|
| Automatic gate installation | $2,500 – $8,500 installed |
| Driveway gate installation | $2,500 – $8,500 installed |
| Gate repair (general) | $350 – $2,600 installed |
| Gate opener repair | $350 – $1,200 installed |
| Electric gate repair | $350 – $2,100 installed |
| Circuit board replacement | $350 – $1,200 installed |
| Operator replacement | $800 – $2,100 installed |
| Gate hinge replacement | $150 – $450 installed |
In Richland Hills, the two things that push a job toward the top of these ranges are post work and power runs. Older lots often have gate posts that need to be re-set in new concrete before anything else happens, and homes built without a gate operator rarely have a convenient electrical feed at the post. Either one adds labor and material to the total.
Whatever the quote comes to, you will see it in writing before we start, and we do not begin work until the price is agreed.
Neighborhoods We Serve in Richland Hills
We work right across ZIP 76180, and the older subdivisions are our familiar ground:
- Richland Hills East
- Richland Hills West
- The area around Richland Park
- Subdivisions off Glenview Drive
- Neighborhoods north of Baker Boulevard
Because we keep Richland Hills calls inside one service zone, most repair calls in the area can be scheduled within a few business days, and urgent gate failures are flagged for priority slots when we have them.
Service Area – Cities Near Richland Hills
Richland Hills sits at the center of the Mid-Cities, so many of our calls come from homes right across the city line. We service Hurst, TX, Bedford, TX, Colleyville, TX, and Euless, TX from the same dispatch model, which means a Richland Hills call and a Bedford call get the same technician pool and the same parts access.
Serving Richland Hills, TX — Our Local Coverage Area
We’re based in the Richland Hills area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Richland Hills
Most repair calls in Richland Hills can be scheduled within a few business days, and we hold priority slots for urgent failures where the gate is stuck open or won’t close. A gate that will not close is a security gap, so tell us on the phone that it’s urgent and we’ll work the schedule around it. Call (866) 321-6117 for a same-week answer on anything in ZIP 76180.
You might, especially in the older subdivisions where gate height, material, and swing direction are written into the covenants. We’ll flag the likely approval points before you buy anything, but the HOA filing is yours to submit. City permit review is a separate matter and applies to most driveway gate work.
Yes. We work on commercial operators, access control, loop detectors, and the logic boards that run them. If you manage a property or an HOA entrance in Richland Hills, the same technician who fixes a residential Viking opener can handle your commercial DoorKing or Elite system. Call (866) 321-6117 for an estimate on your equipment.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Richland Hills Customers Say
"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Greg Parker"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Luis Rodriguez"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Jodi Walsh