Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Bedford, TX
Gate installation in Bedford usually means replacing a gate that was hung when the house was built, somewhere between the late 1960s and mid-1980s. The original wood and early ornamental steel are now failing at the same time across town, so we spend more time measuring, removing, and rehanging than building from scratch. Bedford’s black-clay soil makes it worse: posts heave in spring, shrink in summer, and a gate that dragged in March will scrape by August. If you’re in the 76021, 76022, or 76095 ZIP codes and your driveway or side gate is out of plumb, sagging, or sitting on rotted posts, call Bastion Gate Repair at (866) 321-6117. We’ll tell you whether the frame can be salvaged or the whole run needs replacing.
Why Bedford Homes Are Different
Bedford was largely built out by the 1970s and early 1980s, mostly brick-veneer ranch and traditional single-family homes on small, tightly spaced lots. That means most driveway and side-yard gates are short-span wood or ornamental metal units squeezed between the house and the fence line. The posts were set decades ago, often in direct ground contact, and North Texas black-clay soil has been working against them ever since. Spring rains swell the clay, summer drought shrinks it hard, and the cycle pushes posts out of plumb year after year. We see the result constantly in Bedford: gates that drag on the driveway, latches that no longer line up, and post bases that crumble when you knock on them. Because lots are so tight, a wobbly gate between two properties is rarely a private problem. It’s visible to neighbors, it’s visible to the HOA, and it’s usually attached to a shared fence line. In the dense tracts around 76021 and 76022, a gate post that leans toward the neighbor’s yard becomes a boundary conversation fast. We’re used to working in those tight setbacks and we keep the repair contained to the gate itself whenever possible.
Styles & brands we work with
Our Main Bedford Services
Most Bedford calls boil down to two problems: a gate that’s physically broken or sagging, and an electric gate that no longer opens when it should. Here’s what each one looks like in this city.
Gate Repair in Bedford
Older Bedford gates fail in predictable ways: rotted wood posts, seized hinges, broken pickets, and frames that have worked loose from years of clay-soil movement. Repair here is often a rehang job as much as a parts swap. We straighten or replace posts, refit the frame, and match the replacement hardware to a gate that’s no longer a standard size. If your gate drags, binds, or won’t latch, we’ll diagnose whether it’s the post, the hinges, or the frame itself before we touch anything else. Gate Repair in Bedford covers mechanical fixes on both wood and metal gates.
Electric Gate Repair in Bedford
Automated gates in Bedford usually date from a later retrofit, and the controls are often older than the people operating them. Logic boards fail after storms, loop detectors lose their edge, and openers from brands like Mighty Mule or LiftMaster will run fine for years and then stop for no obvious reason. We troubleshoot the board, the sensors, the receiver, and the mechanical operator as one system, because an electric gate that opens but won’t close is usually a sensor issue, not a motor issue. A gate that won’t close is a security gap, not just an inconvenience. Electric Gate Repair in Bedford details the full diagnostic and repair process.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Bedford
Most Bedford gate installations are replacements. The original gate from a 1970s or 1980s tract home has hit end-of-life, and the question is whether to build it back the same way or upgrade to something automated, longer-lasting, or better matched to a resale-value-conscious neighborhood. We start by measuring the existing opening, checking the posts for rot and plumb, and confirming both property-line placement and any HOA requirements. From Mighty Mule to FAAC, residential to commercial, one call covers it. If the post bases are still sound, we can rehang on the existing structure; if they aren’t, we’ll tell you before we quote, because a new gate on old posts is a repair you’ll repeat in three years. For the full range of what we install, see Gate Installation.
Automatic Gate Installation
Signs you need it
You’re opening and closing your driveway gate by hand more than twice a day, or you’ve got a gate that swings free and a property that needs actual perimeter control.
What it costs in Bedford
Automatic gate installation in Bedford typically runs from $3,400 to $8,300 complete, including the operator, hardware, and labor, depending on gate style and opener type.
How we do it
We verify post strength and spacing, mount the operator and receiver, run electrical to the opener location, and test the full open-close cycle with safety edges and obstruction sensing active.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is rotted at the posts, dragging across the concrete, or built so narrow that a modern SUV barely clears it.
What it costs in Bedford
Driveway gate installation in Bedford typically runs from $2,800 to $6,900 for a new single or double swing gate, materials and labor included.
How we do it
We remove the old gate and posts if needed, set new posts in stabilized footings sized for clay movement, and hang the new gate with clearances checked at the post and the latch.
Sliding Gate Installation
Signs you need it
You have a narrow driveway, a steep entry, or a gate that currently swings into the street or blocks the sidewalk every time it opens.
What it costs in Bedford
Sliding gate installation in Bedford typically runs from $3,800 to $9,200, depending on gate length, track vs. cantilever design, and whether automation is included.
How we do it
We set the track or roller base, hang the gate on its trucks or trolley, adjust the guide rollers, and test travel from full open to full closed without drift.
What Gate Installation Costs in Bedford
| Item | Typical range in Bedford |
|---|---|
| Gate installation labor and materials (basic rehang) | $800 – $2,600 |
| New automatic gate system, opener included | $3,400 – $8,300 |
| Full driveway gate replacement, posts swapped | $2,800 – $6,900 |
Does Bedford require a permit to replace a driveway gate?
Most Bedford residential gate replacements don’t need a building permit if the gate stays within the existing opening and property lines. The exception is when an HOA governs the subdivision, and many Bedford communities do require design review before installation. We’ll check placement and post depths against city setback rules before we start, and we’ll flag any visible HOA approval issue so you can handle it before the work day.
How long does a gate installation take in Bedford?
A straight rehang with sound posts takes a single day. A full replacement that includes new posts, concrete, and an automated opener usually runs two to three days, longer if we’re trenching power across a clay-heavy Bedford yard. Call (866) 321-6117 and we’ll give you a written schedule with the estimate.
Brands We Service in Bedford
We work on virtually every major gate brand, including yours. In Bedford we regularly service Mighty Mule, LiftMaster, FAAC, and BFT openers, and we keep common control boards, remote receivers, and sensor sets stocked locally so a diagnosis doesn’t turn into a week-long parts wait. See our brands for the full system list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Bedford, TX
| Service | Typical range in Bedford |
|---|---|
| Gate repair, hinge or latch only | $90 – $240 |
| Gate repair, full rehang on existing posts | $180 – $390 |
| Gate repair, replace rotted post | $240 – $500 |
| Board or sensor replacement, all models | $220 – $480 |
| Full gate replacement with mid-range opener | $2,800 – $5,700 |
| Mighty Mule automatic gate installation | $1,300 – $3,100 |
| LiftMaster automatic gate installation | $1,500 – $3,500 |
| FAAC automatic gate installation | $2,000 – $4,200 |
| BFT automatic gate installation | $2,000 – $4,500 |
| Commercial slide or swing gate operator | $2,100 – $5,100 |
| Panel and open-picketed sliding gate | $650 – $1,600 |
| Steel-framed boxed walk gate | $1,000 – $2,500 |
Two things push Bedford prices up more than anything else: rotted posts that need digging out of clay soil, and HOA-required material specs that limit what you can install. The quote we give you includes both, written down, and the price is agreed before any work starts. No change orders for a gate that turns out to have a bad post unless you approve it first.
Neighborhoods We Serve in Bedford
We work across all three Bedford ZIP codes, and most neighborhoods in the city are reachable within a single day of scheduling. The oldest gate hardware is concentrated in the 1970s-era tracts of 76021, the northern and western pockets of 76022 have dense HOA-governed subdivisions, and 76095 runs toward the newer mixed commercial and residential edge of town. A sampling of neighborhoods we regularly serve:
- Brookside
- Harwood Terrace
- Shady Lake Estates
- Walnut Creek
- Bedford Meadows
Service Area – Cities Near Bedford
Our service area covers the mid-cities corridor and the surrounding Tarrant County suburbs. If you’re just over the line, you’re still in reach. We handle gate repairs and installations in Hurst, TX, Euless, TX, Colleyville, TX, and Richland Hills, TX, where the housing stock and soil conditions are close enough to Bedford’s that the same failures show up in the same seasons. Call us from anywhere in the area and we’ll confirm we can reach you before you commit.
Serving Bedford, TX — Our Local Coverage Area
We’re based in the Bedford area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Bedford
We schedule Bedford jobs by priority, and a sagging gate that won’t close is treated as urgent because it’s a security gap. Most residential calls in Bedford are diagnosed within one business day of your first call, and we’ll give you a firm arrival window when you book. Call (866) 321-6117 and we’ll tell you the next open slot.
Some Bedford subdivisions have architectural guidelines that govern gate height, material, and color, especially in 76022 where HOA governance is common. If you’re in an HOA, check your covenants before installation. We’ll build to the specified style, but we can’t file design-review paperwork on your behalf. A replacement that matches the existing gate exactly usually avoids the review process entirely.
Yes. Older Bedford gates are our typical job, and a gate that’s been dragging for years has usually settled its posts into a distinct lean that tells us exactly what shifted. We’ll measure the frame, check the hinge wear, and give you a straight answer on whether it’s a rehang or a full replacement. The assessment is a phone call away at (866) 321-6117.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Bedford Customers Say
"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Andre Coleman"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Jerome Ingram"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Greg Parker