Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Carrollton, TX
Gate installation in Carrollton usually means replacing or upgrading a wrought-iron or steel driveway gate that has spent 20 to 35 years in North Texas clay soil and sun. The original gates across Carrollton’s 1980s and 1990s subdivisions are now failing at the post, hinge, and operator level, and patching them no longer makes sense. We install new residential and commercial gate systems that are built for Carrollton’s expansive soils, hailstorms, and summer heat, not against them. Call (866) 321-6117 for a free measure and written quote before any work starts.
Why Carrollton Homes Are Different
Carrollton’s housing stock was largely built out between the 1980s and early 2000s, and that era now drives most of our work. ZIPs 75006, 75007, and 75010 are full of two-story brick veneer homes, townhomes, and gated communities with original wrought-iron or steel driveway and pedestrian gates. Those gates have hit the end of their service life, and the failures are predictable: hinges pull out of rusted posts, latch mechanisms bind, and operators burn through gears as the gate gets heavier and harder to move.
Carrollton’s soil makes gate work different from most of Dallas County. Expansive clay shifts seasonally with moisture, and we routinely find gate posts that have moved an inch or more out of plumb. A gate that drags on the ground in August may bind worse in January after the clay swells with winter rain. Just adjusting the operator rarely fixes that. The post has to be re-set, and often the hinge hardware needs an upgrade to heavier-gauge brackets than the original 1990s spec.
Then there’s the weather. North Texas summer heat bakes gate motors and fades powder coating. Severe spring hailstorms and high winds stress welds and slam gates against their stops. Occasional hard freezes can crack older hydraulic operators. The combination of aging steel, shifting posts, and thermal cycling means Carrollton gate work is less about simple part swaps and more about diagnosing what the soil and climate have done to the structure over three decades.
Styles & brands we work with
Our Main Carrollton Services
Most Carrollton homeowners and property managers call us for one of two problems: a gate that won’t move properly, or an electric opener that’s failed. Both are covered below, and each has a dedicated Carrollton page that goes into much deeper detail.
Gate Repair in Carrollton
Mechanical gate failure in Carrollton almost always traces back to the post or the hinge, not the gate leaf itself. We re-set posts that clay soil has shifted, replace seized or broken hinges, and repair welds that have cracked under years of wind load. Wrought-iron gates from the 1980s and 1990s era often have thin-gauge hinge brackets that were never meant to last this long. We upgrade the hardware so the gate hangs true and swings without dragging. The full scope of mechanical repair work is on the Gate Repair in Carrollton page.
Electric Gate Repair in Carrollton
Automated gates across Carrollton fail in predictable ways: operators burn out from moving a gate that’s gotten heavy, sensors get knocked out of alignment, and loop detectors stop reading vehicles. We diagnose the whole electric system, not just the symptom. That means checking the logic board, the safety edges, the photo eyes, and the power supply before recommending a fix. Many so-called dead openers just need a sensor alignment or a limit switch adjustment. The electric-specific page is here: Electric Gate Repair in Carrollton.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Carrollton
New gate installation in Carrollton is a reset, not a patch. The original gates on many of the city’s 1980s and 1990s homes are now structurally tired: posts have shifted in the clay, steel has rusted at the base, and operators are undersized for the gate weight. Installing a new gate means setting posts in concrete below the clay’s active zone, hanging a gate that’s correctly spec’d for the opening, and pairing it with an operator that will actually move it. This is the service where you stop feeding repairs and get a system that’s right for the next 20 years. See our full Gate Installation service page for details.
Automatic Gate Installation
Signs you need it
Your existing gate is manual and you’re tired of getting out of the car, or your old operator has failed and a repair quote doesn’t make sense against the gate’s remaining life.
What it costs in Carrollton
Automatic gate installation in Carrollton typically runs $2,800 to $8,500 depending on gate size, operator type, and whether new electrical service has to be run to the gate location.
How we do it
We measure the opening, confirm the post condition, pull an electrical run to the operator location, mount the opener, install safety edges and photo eyes, and then cycle the gate through full calibration so it opens and closes smoothly.
Driveway Gate Installation
Signs you need it
Your existing driveway gate sags, drags, or no longer closes squarely, and the cost to re-set posts and rebuild hinges approaches half the price of a new gate.
What it costs in Carrollton
Driveway gate installation in Carrollton generally falls between $3,000 and $12,000 for a steel or wrought-iron gate and operator, depending on the driveway width and whether you’re doing a single or double-leaf system.
How we do it
We remove the old gate and hardware, dig new post footings below the clay shift zone, set steel posts in concrete, hang the new gate, and then install and calibrate the operator so the gate doesn’t strain the motor.
What Gate Installation Costs in Carrollton
| Item | Typical range in Carrollton |
|---|---|
| Single residential driveway gate with operator | $3,000 – $8,500 |
| Double-leaf driveway gate with operator | $4,500 – $12,000 |
| Pedestrian gate only (no operator) | $1,500 – $4,200 |
How long does a full gate installation take in Carrollton?
Most single-gate residential installations take one full day. Double-leaf gates and jobs that need longer electrical runs or new post footings can run two to three days, including concrete cure time before we hang the gate.
Do you handle the power run for a new automatic gate?
Yes. We pull the low-voltage or line-voltage electrical run to the operator location as part of the installation, including conduit and weatherproofing for Carrollton’s summer heat and storm exposure. The price is quoted upfront before any trenching starts.
Brands We Service in Carrollton
We work on virtually every major gate brand installed across Carrollton, including Viking, Ghost Controls, DoorKing, and Elite. Parts are stocked locally, so a common opener or sensor replacement doesn’t sit on a distributor’s lead time. Most repairs with stocked parts are finished in one visit. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Carrollton, TX
| Service | Typical range in Carrollton |
|---|---|
| Gate repair (labor, standard mechanical) | $150 – $400 |
| Electric gate repair (sensor, limit switch, board) | $200 – $650 |
| Operator replacement | $800 – $2,500 |
| Single residential driveway gate with operator (installed) | $3,000 – $8,500 |
| Double-leaf driveway gate with operator (installed) | $4,500 – $12,000 |
| Pedestrian gate only (no operator) | $1,500 – $4,200 |
| Hinge replacement (pair) | $120 – $350 |
| Post re-set in concrete | $300 – $800 |
| Sensor replacement | $100 – $250 |
Carrollton pricing gets pushed higher by two local conditions: posts that need re-setting because of clay soil movement, and electrical runs that have to be trenched through mature landscaping or across a paver driveway. Every job is quoted and agreed before any work starts. We don’t show up with a surprise line item.
Neighborhoods We Serve in Carrollton
We work across all four Carrollton ZIP codes: 75006, 75007, 75010, and 75011. The gated townhome communities near Josey Lane and Rosemeade Parkway keep us busy with HOA-regulated gate failures, while the larger estate lots in the Castle Hills area tend toward full replacements and operator upgrades.
- Castle Hills
- Rosemeade
- Carrollton Highlands
- Homestead
- Woodlake
Standard dispatch across Carrollton is same-day for repair calls placed before early afternoon, and installation measures are scheduled within the week.
Service Area – Cities Near Carrollton
We also serve the surrounding North Dallas corridor. Addison, TX and Farmers Branch, TX are short runs down the tollway with a lot of commercial gate work. University Park, TX has older estate-style driveway gates that need hardware upgrades. Irving, TX adds mixed residential and industrial gate systems along the 183 corridor. Same technical standards, same upfront pricing.
Serving Carrollton, TX — Our Local Coverage Area
We’re based in the Carrollton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Carrollton
We route Carrollton repair calls same-day when the call comes in before early afternoon. Emergency work for a gate that won’t close or secure gets priority over routine maintenance. Installations are scheduled for a measured visit first, then the work itself within the week.
Most gated townhome and planned communities in Carrollton’s 75006, 75007, and 75010 ZIPs require HOA approval before a gate replacement changes the elevation, material, or finish. We can provide the spec sheet and shop drawings your board needs, and we’ve worked with dozens of Carrollton HOAs on the submittal process.
Yes. We handle HOA and property-manager work regularly across Carrollton, including gated entries, pedestrian gates, and commercial access points along I-35E and the President George Bush Turnpike corridor. We provide the quote, the scope, and the after-service report in whatever format your board requires.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Carrollton Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Allen Wong"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Andre Coleman"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Jerome Ingram