Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Carrollton
Gate repair in Carrollton usually means one of three things: a gate that won’t open, a gate that won’t close, or a gate that makes a sound like it’s about to give up. Most Carrollton jobs we handle run between $185 and $610, and we can often be on-site the same day from our DeSoto base. We know the neighborhoods here, especially the older gated communities in 75006, 75007, and 75010 where original steel and wrought-iron gates are hitting the end of their service life. If your gate is sagging, binding, or dead in the driveway, call (866) 321-6117 and we’ll get it sorted.
Why Bastion Gate Repair Is Carrollton’s Preferred Gate Repair Company
Carrollton homeowners and HOA managers call us because we work on virtually every major gate brand, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters more in Carrollton than people realize. A 1994 townhome community off Kelly Boulevard might have an original Viking operator, while a new build off Hebron Parkway runs a modern LiftMaster with a smart controller. Most shops pick one or two brands and fumble the rest. We diagnose the system, not just the symptom.
Brent Calloway started Bastion Gate Repair with a simple idea: a gate that doesn’t close is a security gap, not just an inconvenience. Gate Repair in Carrollton customers consistently tell us we’re the first company that actually explained what was wrong, showed them the broken part, and offered repair before replacement. That brand-agnostic approach saves money and builds trust. We quote the price before any work starts, so there are no surprises on the invoice.
Styles & brands we work with





Wrought Iron Gate Repair in Carrollton
Wrought iron gate repair in Carrollton typically runs $220 to $480 for hinge replacement, realignment, and post correction on a standard driveway gate. The real cost driver is what’s happening at the post, not the panel. In Carrollton’s older subdivisions, the clay soil under the post expands when wet and contracts during dry spells. That cycle slowly pushes the hinge post out of plumb, and suddenly the gate drags along the concrete or refuses to latch. Adjusting the hinges helps for a few weeks, then the sag comes back because the post itself has moved.
Hinge Post Re-Setting
When a gate panel sags at the hinge line rather than at the free end, the post is almost always the culprit. We excavate around the footing, re-set the post in fresh concrete, and often upgrade the hinge hardware to handle the load. This is a permanent fix, not a seasonal adjustment.
Rust Repair and Reinforcement
North Texas humidity and decades of rain take a toll on original ironwork from the 1980s and 1990s. We can cut out rusted sections, weld in new material, and refinish the gate so it looks consistent. If the bottom rail is rotted through, we’ll tell you honestly whether repair or replacement makes more financial sense.
Metal Gate Repair in Carrollton
Metal gate repair in Carrollton covers steel, aluminum, and ornamental iron systems, and most jobs fall in the $190 to $550 range. Steel driveway gates from the 1990s are the most common call we get. The gate is heavy, the original hinges were under-spec, and the operator has been working harder every year to compensate. Eventually the motor burns out or the gate jams halfway. We address both problems: the structural issue at the hinge and the operator strain it caused.
Sag Correction and Realignment
A steel gate that sags more than half an inch will fight the operator on every cycle. We perform a full sag correction, which includes checking post plumb, replacing worn hinges, and rebalancing the gate so the operator isn’t overloaded. This often solves noises, slow operation, and phantom auto-reverse trips.
Wind-Load Hinge Upgrades
Carrollton sits in a storm corridor. Solid infill gates catch wind like a sail, and that repeated wind load twists hinges and cracks welds over time. We upgrade to heavy-duty or adjustable hinges rated for the panel weight and wind exposure. For HOA-regulated gates, we can work with your property manager to keep the repair within community guidelines.
Trusted Brands We Service in Carrollton
We’re certified to work on nine major gate brands, so there’s no guessing. If your Carrollton gate runs a Viking operator from the 1990s, a Ghost Controls kit from a DIY install, or a DoorKing commercial system at a business park off I-35E, we stock or can source the parts quickly. We keep common LiftMaster, FAAC, and Linear components in our service vehicles, which means fewer return trips and faster turnaround for customers across 75006, 75007, 75010, and 75011. From Mighty Mule to Elite, residential to commercial, one call covers it.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Carrollton Homes
- Hinge post heave from expansive clay: Carrollton’s soil swells after spring rain and shrinks in summer heat. This seasonal cycle lifts hinge posts out of alignment, causing gates to drag and operators to bind. Re-setting the post is the only fix that lasts.
- Wind damage on solid infill gates: Severe spring storms with 60+ mph gusts twist and crack hinges on original 1980s and 1990s wrought-iron gates. We see this most in older subdivisions along Rosemeade and around Hebron High School.
- Operator failure from thermal cycling: Intense summer heat degrades capacitors, control boards, and safety photocells. A gate that works fine at 8 a.m. may fail at 3 p.m. in July. We test the entire circuit, not just the motor.
- Entrapment protection faults: UV exposure and heat cause photocells and edge sensors to drift out of alignment, triggering false auto-reverse trips or shutdowns. This is a safety feature doing its job, but it needs recalibration or replacement to function correctly.
Pricing for Gate Repair in Carrollton, TX
Here’s what you can expect to pay for common gate repairs in Carrollton:
- Hinge replacement and realignment: $185 to $420
- Hinge post re-setting and footing repair: $300 to $650
- Operator diagnostic and repair: $150 to $390
- Control board replacement: $250 to $600
- Full sag correction on a steel driveway gate: $275 to $550
- Rust section repair and welding: $200 to $500
We quote every job before we start. The estimate is free, and the price we agree on is the price you pay. Call (866) 321-6117 for an exact quote on your gate.
We Also Serve Cities Near Carrollton
Our service area extends beyond Carrollton to Addison, Farmers Branch, University Park, and Irving. If you manage multiple properties across the metroplex, we can schedule all of them under one service visit. Learn more on our Gate Repair hub page or call us directly to discuss your site.
Serving Carrollton, TX — Our Local Coverage Area
We’re based in the Carrollton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Carrollton
The hinge post itself has likely moved. Carrollton’s expansive clay soil expands when wet and contracts when dry, slowly lifting or tilting the post out of plumb. Adjusting hinges on a moving post is like straightening a picture on a sinking wall. The fix is excavating the footing and re-setting the post in fresh concrete, often with a deeper base. This is the single most common repair we perform in Carrollton’s older gated communities, and it’s the one that actually lasts.
Most operators have a manual release handle, usually a small lever or key on the side of the motor housing. Pull it, and the gate disengages from the drive chain or screw so you can push the gate by hand. On LiftMaster and Viking operators, look for a red handle or a keyed release. On FAAC and BFT models, the release may be behind a small access panel. If you’re not sure where yours is, call us and we’ll walk you through it. Never force the gate; if it’s been binding, the release can be under load and suddenly move.
Automatic gates must have functioning entrapment protection: photoelectric sensors, edge sensors, or both, depending on gate type and travel. This is an ASTM F2200 and UL 325 requirement that applies nationally, but Carrollton inspectors and HOA boards enforce it closely on gated community entrances. If your gate reverses unexpectedly or stops mid-travel, the protection circuit may have a fault. That’s a safety issue we address as a priority, not an optional upgrade. We test the full entrapment system on every automatic gate repair.
Yes. We repair residential driveway gates and full commercial systems across Carrollton. That includes HOA-regulated townhome gates in Rosemeade and other planned communities, plus higher-cycle commercial operators at business parks along I-35E and the President George Bush Turnpike. Commercial gates need heavier-duty components and often tie into access control systems with keypads, card readers, or phone-entry systems. We handle the mechanical, electrical, and access-control sides, so you’re not juggling multiple contractors.
Three factors: intense summer heat stresses electronic components and degrades plastic housings, expansive clay soil shifts posts and binds gates, and spring storm winds load solid infill panels and twist hinges. Add hard freezes that can crack hydraulic operators, and you have a climate that punishes gate hardware year-round. Many original 1980s and 1990s gates in Carrollton simply weren’t built for this cycle. The repair strategy that works here is post correction, upgraded hinges, and operators sized for the actual load, not the original spec.
If your gate is sagging, stuck, or making noise in Carrollton, call Bastion Gate Repair at (866) 321-6117 for a free estimate. We’ll tell you what the system actually needs, quote the price before any work starts, and get it fixed right.
Written by Brent Calloway, Owner at Bastion Gate Repair, serving Carrollton and the surrounding metroplex.