Electric Gate Repair in Dallas — On-Site in 60 Minutes, Fixed the Same Day

Fast, Reliable Electric Gate Repair Across Dallas

Electric gate repair in Dallas typically runs $185 – $540 for motor, control board, and sensor work, with most jobs completed in a single visit. We’re Bastion Gate Repair, led by Brent Calloway, and we handle everything from a LiftMaster operator reversing on a heavy custom swing gate in Lakewood to a Mighty Mule keypad that won’t sync in the M Streets. Our team works on virtually every major gate brand, and we serve all of Dallas, including ZIP codes 75242, 75201, 75202, and 75203. Call (866) 321-6117 for a free estimate, and we’ll give you the exact price before any work starts.

Call (866) 321-6117

Dallas isn’t a simple service area for gates. The housing stock swings between century-old estates and brand-new modern builds, often on the same street. That’s exactly the territory we know. We’ve diagnosed gates on Swiss Avenue that hadn’t moved smoothly in decades, and we’ve integrated access control on new horizontal-plank driveways in Lakewood. One call covers both ends of that spectrum.

Why Bastion Gate Repair Is Dallas’s Preferred Electric Gate Repair Company

Dallas property owners don’t call a generalist when a heavy gate fails. They call us because we diagnose the system, not just the symptom. Brent Calloway built Bastion Gate Repair around a simple approach: tell the customer what their gate actually needs, repair it honestly, and stand behind the work. That’s why our service area in Dallas keeps growing through direct referrals, not ads.

Our Electric Gate Repair team is brand-agnostic. We troubleshoot the actual fault rather than defaulting to a full replacement, which saves Dallas homeowners real money. A gate that won’t close is a security gap, not just an inconvenience, and our technicians treat it that way. We carry diagnostic equipment and replacement parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we’re not waiting on a distributor when your gate is down.

Dallas’s older neighborhoods pose a particular challenge. In Swiss Avenue and Munger Place historic districts, the original wrought-iron gates are often irreplaceable. We know how to separate the mechanical and electrical work from the ornamental metalwork, which can require preservation review. That distinction lets us get your opener running the same week while the scrollwork restoration follows the proper approval path.

Electric Gate Motor in Dallas

Electric Gate Motor work in Dallas usually means the motor is still salvageable but the mechanical alignment is off. Heavy custom gates sit on expansive clay soil here, and when the ground shifts, the hinge post moves with it. The panel binds, the operator strains, and the motor reverses mid-travel. A replacement motor won’t fix that. We correct the sag at the post footing, re-true the panel, then reset the operator’s travel limits and verify the entrapment protection. That sequence, not a motor swap, is what returns the gate to quiet operation.

Troubleshooting the Operator

When a Dallas gate motor hums but doesn’t move, the capacitor or limit switch is usually the culprit. When it clicks and does nothing, we’re checking the control board and the wiring connections at the junction box. When it opens fine but reverses before fully closing, we look first at the safety photocells and the force settings, then at whether the panel is binding because the post shifted. The motor itself is rarely the first thing we replace.

Replacement When It’s Needed

If the motor has burned out or the gear train is stripped, we’ll quote you the replacement before we order it. A typical motor replacement on a residential swing gate in Dallas falls between $350 and $900 depending on the brand and duty cycle. Commercial slide gate operators run higher, usually $1,200 to $2,800, because they’re built for continuous-use hardware. We’ll tell you exactly what your system needs before any part gets ordered.

Gate Access Control in Dallas

Gate Access Control in Dallas means more than a keypad. It’s the whole signal chain from your remote or phone to the loop detector in the driveway, the keypad at the curb, and the intercom or camera at the gate. On Swiss Avenue and Munger Place, high-end properties often need the access control upgraded without touching the historic gate itself. We can do exactly that: the ornamental ironwork stays untouched while the operator, keypad, and entry system get modernized beneath it.

Keypad and Remote Integration

Older keypads on Dallas gates take a beating from the sun and humidity. The membrane buttons crack, the number pads fail, and moisture gets into the housing. We replace them with weather-resistant units and program them to your existing operator, whether it’s a LiftMaster, FAAC, or a legacy Viking. If you want a phone app added to the same gate, we’ll match the receiver to your operator’s protocol rather than ripping out a working system.

Safety Loop and Photocell Work

Underground loop detectors in Dallas driveways fail quietly. The gate still opens for a few vehicles, then stops detecting entirely. Missed loops mean the gate sits open or reverses on a car. We test the loop continuity, replace the detector board when needed, and if the loop wire itself is broken under the concrete, we can cut a new loop into the pavement and seal it. A photocell alignment issue, by contrast, is usually fixed in minutes, not hours.

Trusted Brands We Service in Dallas

We work on virtually every major gate brand, including yours. Our techs have certified familiarity with LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. From Mighty Mule to FAAC, residential to commercial, one call covers it. We keep common replacement parts stocked for the systems we see most in Dallas, so a failed Limit switch or a burned logic board on a LiftMaster operator doesn’t sit waiting on a freight truck for a week. We’ll match the correct board revision to your operator and program it on site.

Common Electric Gate Repair Problems We See in Dallas Homes

• Reversing gates from shifted posts: Expansive clay soil under Dallas moves more than most people realize. A heavy swing gate on a shifted post will bind, trip the force sensor, and reverse. We correct the footing and re-true the panel before touching the motor.
• Swollen wood gates after summer humidity: Custom cedar and horizontal-plank gates in Lakewood and the M Streets absorb moisture all summer, then warp enough to stall the rack and pinion. We shave or re-router the edges, re-align the rack, and reset the operator limits.
• Seized ornamental hinges in historic districts: In Swiss Avenue and Munger Place, original wrought-iron hinges rust and freeze over decades. Replacing them may need preservation approval, so we document the condition first and coordinate the work with the district requirements.
• Dead loop detectors and flaky keypads: Underground loops under Dallas driveways crack with soil movement, and sun-damaged keypads stop reading numbers. Both failures leave you either locked out or holding the gate open. We test, replace, and reprogram on the same visit.

Pricing for Electric Gate Repair in Dallas, TX

We Also Serve Cities Near Dallas

Our Electric Gate Repair in Dallas coverage extends to the surrounding communities. We regularly run service calls to Highland Park, University Park, Richardson, and Cockrell Hill. Same crew, same diagnostic approach, same upfront pricing. If you manage a property in any of those cities, call (866) 321-6117 and we’ll get you on the schedule.

FAQs About Electric Gate Repair in Dallas