Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Arlington
Gate repair in Arlington comes down to two things most repair shops never address: storm damage and shifting clay soil. We work on driveway gates, backyard gates, and automatic gate systems throughout Arlington every week. If your gate is sagging, stuck, or refusing to open, call (866) 321-6117 and we’ll diagnose the actual problem, not just the symptom. We know Arlington’s subdivisions, its soil, and its older gate hardware.
Why Bastion Gate Repair Is Arlington’s Preferred Gate Repair Company
Arlington homeowners call us because we don’t treat every gate like a parts swap. Brent Calloway built Bastion Gate Repair around one idea: diagnose the system, fix what’s actually wrong, and tell the customer the truth about what can be saved and what should be replaced. That matters in Arlington, where a lot of gate failures trace back to two recurring causes: hail season and Blackland Prairie clay heaving posts out of plumb.
We arrive with parts and tooling for nine major gate brands, including LiftMaster, FAAC, and Mighty Mule. That means when an Arlington property manager calls about a Viking slide gate at a community entrance, or a homeowner in the 76016 ZIP has a Ghost Controls opener that won’t respond, we don’t have to order a board, wait a week, and come back. We stock what Arlington’s housing stock actually uses, including legacy control boards from the 1990s and 2000s that many shops won’t touch. Our Gate Repair team services both residential and commercial systems, from Mighty Mule driveway openers to DoorKing operators at gated apartments and HOA entrances.
Arlington customers also get straight answers on retrofit versus replace. We’ll tell you when re-setting a post in deeper concrete makes more sense than buying a new gate. And when a hail-bent steel panel is cheaper to replace than to straighten, we’ll say that too. That honesty, plus the fact that we show up knowing the local failure modes before we even open the truck, is why Arlington keeps calling.
Styles & brands we work with
Iron Gate Repair in Arlington
Iron gate repair in Arlington usually means one of three things: a hinge post that’s leaning from clay heave, a weld that’s cracked where the frame carries weight, or a bent section from a spring hailstorm. We see all three across Arlington’s subdivisions, especially in neighborhoods developed in the 1970s through 2000s where original footings were poured shallow. A typical iron gate repair in Arlington runs $180 – $420, depending on whether we’re re-plumbing hinges, re-setting a post, or welding a cracked joint. If the frame itself is twisted beyond straightening, replacement often becomes the cheaper answer, and we’ll tell you that before any work starts.
Hinge and post re-alignment
When a post leans, the gate binds at the latch or drags across the driveway. We re-set the post deeper than the original footing, then re-hang the gate so it swings clean. This is a common fix in Arlington, where drought-to-rain cycles swell the clay and push shallow footings out of line.
Weld repair and frame straightening
Hail and wind don’t just dent panels; they stress the welded corners where the frame takes load. We grind, re-weld, and reinforce these joints, then address whatever caused the stress in the first place, so the repair holds through the next storm season.
Sliding Gate Repair in Arlington
Sliding gate repair in Arlington typically involves a gate that’s jumped its track, a rack-and-pinion drive that’s chewed up, or an operator that’s pushing against a gate the clay has shifted out of alignment. Most sliding gates in Arlington are on larger lots in north and south Arlington, where automated driveway gates protect long approaches. A typical sliding gate repair here runs $220 – $500, with motor and control board replacement at the higher end. We quote the full price before work begins, and the number we quote is the number you pay.
Track, rack, and alignment work
When a slide gate stops partway, it’s usually because the gate is binding against the track or the rack teeth are worn. We check the post line, the track level, and the drive engagement together, because fixing one without the others just moves the failure further down the gate.
Operator and limit corrections
Older slide operators with mechanical limit switches drift over time. We reset limits, re-time the close cycle, and add or replace safety photocells where the original system predates current UL 325 requirements. That’s a retrofit we recommend on most legacy Arlington slide gates.
Trusted Brands We Service in Arlington
We work on virtually every major gate brand, including yours. Arlington homes and commercial properties run LiftMaster, FAAC, BFT, and Mighty Mule in Arlington equipment in everything from small driveway swing gates to full commercial slide operators. Because we carry parts for these systems on the truck, most Arlington repairs are finished in a single visit. That’s the difference between a specialist and a general handyman: we don’t order a generic board and hope it works. We carry the right board for the right brand, and we know the failure points on each one before we open the panel.
Common Gate Repair Problems We See in Arlington Homes
- Hail-bent gate panels and wind-stressed frames. Arlington sits in DFW’s Hail Alley, so spring storms leave a trail of dented steel and aluminum driveway gates. A bent panel is sometimes straightenable, but if the frame itself is racked, replacement is usually the smarter spend.
- Leaning posts from Blackland Prairie clay. The clay under Arlington expands when wet and shrinks when dry. Shallow post footings heave, posts lean, and the gate binds. We re-set posts in deeper concrete rather than just re-tightening hinges.
- Legacy control boards and obsolete safety systems. Many Arlington gates from the 1990s and early 2000s have boards that are no longer manufactured and lack modern UL 325 entrapment protection. We can retrofit photocells and current-sensing edges without replacing the whole operator.
- Driveway gates knocked out of plumb by straight-line winds. Hail gets the headlines, but straight-line winds push large gate surfaces hard. The gate bends, the hinge mounts loosen, and the operator works against the misalignment until something fails. We fix the alignment first, then the operator.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Arlington, TX
| Service | Typical Arlington Range |
|---|---|
| Iron gate hinge/post re-alignment | $180 – $320 |
| Sliding gate track/rack repair | $220 – $450 |
| Operator or control board replacement | $260 – $520 |
| Weld repair (per joint) | $90 – $180 |
| Safety photocell retrofit | $150 – $280 |
These ranges reflect what we typically quote across Arlington’s 76015, 76016, 76017, and 76018 ZIP codes. The biggest cost drivers are whether a post needs re-setting, whether the control board is still available, and how much hail or clay damage the gate frame has absorbed. We give a free, written estimate before any work starts, and the price we quote is the price you pay. No surprise line items. Call (866) 321-6117 to schedule a measure.
We Also Serve Cities Near Arlington
Bastion Gate Repair covers Arlington and the surrounding DFW communities, including Dalworthington Gardens, Pantego, Hurst, and Grand Prairie. If you’re just outside Gate Repair in Arlington and need a specialist who knows the local clay soil and storm patterns, call us. We schedule work across the corridor and show up with the right parts on the truck.
Serving Arlington, TX — Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Arlington
We respond to most Arlington service calls within 24 hours, and emergency calls are treated as priorities in our schedule. If your gate is stuck open and your property is unsecured, call (866) 321-6117 and we’ll get you on the schedule right away. Non-emergency repairs are usually scheduled within a day or two.
Yes. We service all Arlington ZIP codes including 76015, 76016, 76017, and 76018. Whether you’re near the University of Texas at Arlington campus, in a north Arlington subdivision off Division Street, or south of Interstate 20, we know the housing stock and the gate hardware that came with it.
Either one can cause a gate to stop mid-travel, and the only way to know without guessing is to test the drive under load. We check rack engagement, track level, and operator torque together, because in Arlington’s clay soil, a shifted post often makes the operator look like the problem when it isn’t. Call (866) 321-6117 and we’ll diagnose it properly.
Typically it’s comparable to what you’d pay in Hurst, Grand Prairie, or Pantego. What changes the number is the specific failure: a hail-bent steel frame or a post that needs re-setting in concrete will cost more than a hinge tightening. We give a written estimate before any work begins so you know the real number up front.
Yes, our workmanship is warrantied, and we stand behind every repair with a follow-up if anything shifts after the next storm or dry spell. Given Arlington’s clay and hail cycles, we’d rather come back and check the alignment than have you live with a gate that drags. Call (866) 321-6117 for details on warranty coverage for your specific repair.
Contact Bastion Gate Repair in Arlington
If your gate is bent from hail, leaning from clay heave, or running on a control board that’s older than your car, we can help. Brent Calloway and the Arlington team at Bastion Gate Repair diagnose before we touch anything, quote before we work, and fix what’s actually broken. Call (866) 321-6117 for a free estimate, or to schedule a technician to your Arlington home or property today.
Written by Brent Calloway, Owner at Bastion Gate Repair, serving Arlington and the DFW Metroplex from our DeSoto base.