Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Pantego
Electric gate repair in Pantego typically runs $185 – $495 for most residential service calls, with same-week scheduling available for nearly every job. We know the gates here: 40- and 50-year-old iron swing gates on original posts, aging LiftMaster and Viking operators, and clay soil that moves more than anyone expects. Call (866) 321-6117 for a straight answer and a free quote before any work begins.
Pantego is a town of about 2,500 people, almost entirely built out with homes platted between the 1950s and 1970s. That means nearly every call we take here is rehab work, not new construction. We know the neighborhoods around Pioneer Parkway, Smith Barry Road, and Shady Lane well, and we know which operators were original equipment in these mid-century ranch homes. When your gate stops closing or your opener grinds and quits, you want someone who’s already familiar with what’s under the cover. That’s the work we do every day.
Why Bastion Gate Repair Is Pantego’s Preferred Electric Gate Repair Company
Led by owner Brent Calloway, Bastion Gate Repair works on virtually every major gate brand on the market, including Viking, Ghost Controls, DoorKing, and Elite, covering residential and commercial systems under one roof. Pantego homeowners call us because we diagnose the actual fault instead of defaulting to a full replacement pitch. On a swing gate with a tired operator and a leaning post, the problem is usually both; on a slide gate that binds mid-travel, the issue is often the rack and pinion, not the motor. Our Electric Gate Repair experience means fewer wasted service calls and fewer invoices that outrun the original quote.
A gate that won’t close is a security gap, not just an inconvenience. That’s how we approach every Pantego job. We repair what’s repairable and tell you honestly when a replacement operator or panel is the cheaper long-term play. Because we service the full lifecycle, from diagnosis through installation, you’re not juggling two contractors and a handyman to get one gate working again.
Styles & brands we work with
Gate Opener Repair in Pantego
Gate opener repair in Pantego usually means a 20- to 40-year-old operator that has outlived its original design expectations. The housing stock here is dominated by mid-century ranch homes with decorative iron driveway gates, and the original openers paired with those gates are now hitting the end of their serviceable life. A typical gate opener repair on a Pantego residential system runs $225 – $520, depending on whether we’re replacing a logic board, capacitor, limit switch, or the full motor assembly.
Control Board and Logic Board Diagnosis
Older Viking, LiftMaster, and DoorKing operators fail at the control board first, especially after years of North Texas heat. We bench-test boards and source replacements for discontinued parts before recommending a full operator swap. Brent Calloway’s brand-agnostic approach means we don’t steer you toward a replacement just because the board is easier to source.
Opener Motor and Drive Repair
When a motor burns out, it’s usually because the gate has been binding against a heat-warped panel or a post that’s moved in the clay. We fix the underlying bind, not just the motor, so you’re not calling us again in six months. Repair or replace, we’ll tell you what your system actually needs.
Automatic Gate Repair in Pantego
Automatic gate repair in Pantego brings us to gates that move under power: swing gates with articulated arms, slide gates on tracks, and a handful of barrier gates at small commercial entrances. The work ranges from reversing-loop sensors to rack and pinion alignment, and most automatic gate repairs here finish on-site the same day. For a Pantego automatic gate repair, homeowners can expect to pay $190 – $650 depending on the operator type and the number of failed components.
Safety Sensor and Photocell Repair
When a gate stops mid-travel and reverses, the safety photocell is often the first suspect. On an aging iron gate hung on original posts, the real culprit is usually a leaning hinge post that has thrown the beam out of alignment. We re-set the post or adjust the sensor head, then verify the gate closes cleanly through its full arc.
Rack and Pinion and Slide Gate Service
Slide gates installed on original concrete runs in Pantego suffer from heat expansion and clay movement, pulling the rack out of true. We re-shim or replace worn rack sections, dial in the limit switches, and get the gate gliding again. The goal is an automatic gate that works without sounding like it’s dragging a post behind it.
Trusted Brands We Service in Pantego
We work on virtually every major gate brand, including yours. The Pantego service area has a healthy mix of original Viking and DoorKing operators from the 1980s and 1990s, alongside newer Ghost Controls and Elite systems retrofitted by homeowners over the years. We stock common control boards, capacitor kits, remotes, and safety sensors for these brands, so most Pantego repairs don’t wait on a parts shipment from two states away. From Mighty Mule to FAAC, residential to commercial, one call covers it.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Pantego Homes
- Clay-heaved posts and leaning gates. Expansive clay under original 1950s-70s post footings swells with spring rain and shrinks in August heat. A post plumb in March is visibly leaning by summer, throwing the gate out of square and tripping the safety sensors.
- Obsolete control boards. Twenty- to forty-year-old operators fail at the logic board, and manufacturers have discontinued many of those parts. We source NOS boards when available; when we can’t, we give you a straight replacement recommendation instead of stringing you along.
- Heat-warped wood and iron panels. Summer heat in Arlington-adjacent Pantego warps wood gates and stresses iron panels, causing binding against the posts. The operator strains, motor windings overheat, and the gate eventually quits mid-cycle.
- Worn hinges and out-of-square frames. Generously sized lots mean wide driveway gates, and wide gates are hard on original hinges. We re-hang and re-plumb panels on the original posts where the post is still solid, saving you the cost of a new gate frame.
Pricing for Electric Gate Repair in Pantego, TX
Electric gate repair in Pantego, TX generally runs:
- Diagnostic service call: $75 – $125, credited toward the repair if you proceed.
- Gate opener repair: $225 – $520.
- Automatic gate repair including sensor or rack work: $190 – $650.
- Control board replacement: $180 – $340 for common residential operators.
- Post re-setting or re-plumbing: $300 – $700 per post, depending on footing depth and access.
Every quote is agreed in writing before we touch your gate. No surprises. Pricing shifts based on the operator brand, whether the post needs re-setting, and whether parts are still available. Call us for a free estimate and we’ll put numbers to it on the first visit.
We Also Serve Cities Near Pantego
Our schedule brings us regularly to the surrounding cities, including Dalworthington Gardens, Arlington, Grand Prairie, and Hurst. If you’re just outside Pantego and your gate has quit, call and ask; chances are we’re already in the area on another job that week. We cover ZIP 76013 and the neighboring communities in Tarrant County.
Serving Pantego, TX — Our Local Coverage Area
We’re based in the Pantego area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Pantego
Most discontinued control boards can be retrofitted with a universal board or a newer board from the same manufacturer, but the decision comes down to whether the retrofit cost exceeds 60-70% of a new operator. A retrofit in Pantego typically runs $180 – $340; a complete operator replacement runs $900 – $2,400 installed. If the motor and gearbox are also tired, replacement is usually the smarter call. Call (866) 321-6117 and we’ll tell you which path makes sense for your gate.
It’s almost always the post. Pantego sits on expansive clay soil that swells and shrinks with the wet-dry cycle, heaving the original 1950s-70s post footings and tilting the hinge post a little more each year. The gate panel itself may also be out of square from the stress, but the root cause is under the ground. We pull the post, pour a deeper or wider footing, and re-hang the panel square.
Yes. Any automatic gate operator installed after 2000, and any operator on a gate serving a residential driveway in Pantego, is required to have entrapment protection: photoelectric sensors and contact edges as applicable. If your legacy gate lacks working sensors, that’s a repair and a safety issue, not an optional upgrade. We bring any gate we service up to current safety requirements as part of the job.
Yes. Most 1980s and 1990s operators accept aftermarket keypad and loop detector integration, either through the existing control board terminals or with a small add-on receiver. A keypad entry add-on in Pantego typically runs $150 – $300 installed. Loop detectors for vehicle exit are doable on older systems but require cutting and sealing the concrete drive; we quote that on-site.
If the posts are solid and plumb after re-setting, repair is almost always cheaper. A well-built iron gate from the 1970s outlasts most of what’s manufactured today, and re-plumbing plus new hinges runs $300 – $900. Replacement makes sense only when the posts are rotted through, the panel is structurally compromised, or you’re doing an operator upgrade anyway and want to start clean. We’ll measure, inspect, and give you both numbers before you decide.
When your gate stops working in Pantego, call (866) 321-6117. We’ll schedule a service visit, quote the repair before any work starts, and get your perimeter back where it should be: closed.
Written by Brent Calloway, Owner at Bastion Gate Repair, serving Pantego and the surrounding Tarrant County communities with residential and commercial gate repair, electric gate service, and installation.