Ghost Controls Gate Repair in Colleyville, TX

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Ghost Controls Gate Repair in Colleyville, TX | Bastion Gate Repair

We’re an independent Colleyville Gate Repair shop, and we troubleshoot Ghost Controls operators every week. If your swing gate is acting up, the problem is usually one of three things: a heat-stressed control board, a battery that gave up after a cold snap, or arm geometry thrown off by shifting clay under a masonry pillar. Call (866) 321-6117 and we’ll diagnose the actual fault, not guess at it. We’re not affiliated with or authorized by Ghost Controls, but we know their slide and swing systems from the field, not from a brochure.

Call (866) 321-6117

Written by Brent Calloway, Owner at Bastion Gate Repair, serving Colleyville since 2008.

Why Colleyville Residents Choose Us for Ghost Controls Service

Ghost Controls operators are common on Colleyville’s estate lots, and they fail in ways that are specific to this city. The control boards sit inside masonry pillars with no venting, so the summer heat cooks them. The battery-backup kits get hammered by cold snaps, then the gate stalls mid-cycle. And the expansive clay shifts posts, throwing the arm mount out of alignment. We see all of it. Brent Calloway has been fixing gates in North Texas for going on two decades, and he’ll tell you: “If your gate isn’t working right, there’s a reason – and finding it is the job, not guessing at it.” That’s how we approach every Ghost Controls job in Colleyville. We work on virtually every major gate brand, and Ghost Controls is one we know cold. From Ghost Controls sales & service to full operator rebuilds, one call covers it.

Explore

Styles & brands we work with

Wrought iron
Wrought iron
Wood & steel frame
Wood & steel frame
Farm & ranch
Farm & ranch
Sliding driveway gates
Sliding driveway gates
LiftMaster operators
LiftMaster operators

Common Ghost Controls Gate Repair Problems We Solve in Colleyville

These are the failure modes we see most often on Ghost Controls equipment in Colleyville. Each one has a local driver behind it.

  • Control boards baked inside masonry pillars. Colleyville’s summers push control box temperatures well past what the boards are rated for. The board browns out, the gate goes dead, or the opener “learns” its limits incorrectly. We replace with genuine Ghost Controls boards and, where the install allows, improve venting so the next board doesn’t cook the same way.
  • Battery-backup collapse after a cold snap or cloudy stretch. Ghost Controls solar and battery-backup swing kits are popular on Colleyville’s larger lots, but a run of hazy days or a hard freeze kills the battery’s ability to hold charge. The gate opens once and stalls. The solar panel is fine; the battery isn’t. We test under load, not just open-circuit voltage, and swap in a battery that actually holds.
  • Limit-switch and arm-bracket drift on swing kits. Expanded clay soil shifts a post half an inch, the arm geometry changes, and the opener reverses mid-travel or slams. This is the most common Ghost Controls problem in Colleyville, and it’s rarely the motor. It’s alignment.
  • Accessory faults at the keypad and intercom. After a thunderstorm, we see fried wireless keypads and remote receivers. The iron rusts at the weld, moisture wicks into the conduit, and the wiring corrodes. We trace the fault, replace the accessory, and seal the entry point so it doesn’t happen again next spring.
  • Hinge and post fatigue on heavy ornamental gates. Colleyville’s ornamental iron gates are heavy, and the hinges and posts take the full load every cycle. When a hinge sags or a post shifts, the Ghost Controls opener fights the extra resistance and trips. We repair the hinge geometry and post mounting before touching the operator.

Ghost Controls Service in Colleyville: What Local Conditions Mean for Your Equipment

Here’s the thing about Colleyville that you won’t read on a generic gate-repair page: Ghost Controls swing operators here very often sit on heavy masonry-and-iron pillars rather than wood posts. When the expansive clay under Colleyville shifts – and it does, every dry summer, then every wet spring – that pillar moves first. The opener’s arm geometry goes out before the motor ever fails. So the fix is realignment and post work, not a new control board. We’ve done this exact repair on the estate corridor off West McDonwell School Road and throughout the 76034 ZIP, and we also handle Ghost Controls in Bedford. Brent’s crew was called out to a heavy-duty single swing kit where the gate would open partway and reverse. The homeowner had already replaced the battery. We found the clay had heaved the iron pier enough to throw off the arm mount and trip the limits. We reset the post, re-hung the arm bracket, and re-learned the travel. The gate has run clean since. The battery was never the problem. That’s the difference between a Ghost Controls specialist and a handyman with a multimeter.

Ghost Controls Models & Products We Service in Colleyville

We work on the full Ghost Controls residential lineup: the Heavy-Duty Single Swing (TDS series) DIY slide/swing kits, the Architectural Series swing openers, the solar and battery-backup swing gate kits, and the accessory kits – AXDP, AXAM, wireless keypads, remote receivers. When the part is the weak link, we install genuine Ghost Controls control boards, arms, batteries, and accessories. When a site problem like shifting clay or rusted ironwork means an OEM bracket won’t hold up, we use quality aftermarket hardware that’s actually built for the conditions. On an operator that’s had water intrusion or a burned board at a masonry pillar, we’ll tell you straight when a rebuild won’t last and a full motor replacement is the smarter spend. We don’t default to replacements, and we don’t nurse along a dead board to pad a bill.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Ghost Controls Service Pricing in Colleyville

What you’ll pay depends on what’s actually wrong, and we quote the full price before any work starts. As a benchmark, most Ghost Controls repairs in Colleyville land in these ranges:

  • Diagnostic visit: $75 – $150, credited toward the repair if you proceed.
  • Battery replacement (solar/backup kits): $120 – $280 installed.
  • Control board replacement: $250 – $520 including the part.
  • Arm realignment / limit re-learn: $140 – $240.
  • Full operator replacement (motor, arm, board): $700 – $1,400 depending on model and access.

Every estimate is free, and the number you approve is the number you pay. Call (866) 321-6117 for an exact quote on your Ghost Controls system in Colleyville.

Serving Colleyville, TX — Our Local Coverage Area

We’re based in the Colleyville area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs – Ghost Controls Gate Repair in Colleyville

Service Areas Near Colleyville

Beyond Colleyville, we run Ghost Controls service across the south Dallas area: Colleyville service area, Ghost Controls service in Richland Hills, Ghost Controls service in Travis Ranch, plus DeSoto, Duncanville, Cedar Hill, Glenn Heights, and Ovilla. If you have a Ghost Controls gate and you’re within 30 minutes of Colleyville, we’ll come out.

Book Your Ghost Controls Service in Colleyville Today

If your Ghost Controls gate is stalling, slamming, or dead at the pillar, call (866) 321-6117. We’ll schedule a visit, diagnose the actual fault, and quote the repair before any work starts. Same-day service is available for urgent gate failures in Colleyville. Free estimates, every job.

Written by Brent Calloway, Owner at Bastion Gate Repair, serving Colleyville since 2008.

Need Gate Repair help in Colleyville? Licensed & insured · 1-hour response · free estimates
Call (866) 321-6117
Areas We Serve

Request a Free Estimate in Colleyville

Tell us what you need — Bastion Gate Repair responds fast. No obligation.

By submitting this form, you acknowledge our Privacy Policy and agree that you may be contacted by call, text, or email regarding your project, including by the service partners who may complete the work.

Call Now - 24/7 Dispatch