Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Colleyville, TX | Bastion Gate Repair
We’re an independent Colleyville Gate Repair shop, and we troubleshoot Ghost Controls operators every week. If your swing gate is acting up, the problem is usually one of three things: a heat-stressed control board, a battery that gave up after a cold snap, or arm geometry thrown off by shifting clay under a masonry pillar. Call (866) 321-6117 and we’ll diagnose the actual fault, not guess at it. We’re not affiliated with or authorized by Ghost Controls, but we know their slide and swing systems from the field, not from a brochure.
Written by Brent Calloway, Owner at Bastion Gate Repair, serving Colleyville since 2008.
Why Colleyville Residents Choose Us for Ghost Controls Service
Ghost Controls operators are common on Colleyville’s estate lots, and they fail in ways that are specific to this city. The control boards sit inside masonry pillars with no venting, so the summer heat cooks them. The battery-backup kits get hammered by cold snaps, then the gate stalls mid-cycle. And the expansive clay shifts posts, throwing the arm mount out of alignment. We see all of it. Brent Calloway has been fixing gates in North Texas for going on two decades, and he’ll tell you: “If your gate isn’t working right, there’s a reason – and finding it is the job, not guessing at it.” That’s how we approach every Ghost Controls job in Colleyville. We work on virtually every major gate brand, and Ghost Controls is one we know cold. From Ghost Controls sales & service to full operator rebuilds, one call covers it.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Colleyville
These are the failure modes we see most often on Ghost Controls equipment in Colleyville. Each one has a local driver behind it.
- Control boards baked inside masonry pillars. Colleyville’s summers push control box temperatures well past what the boards are rated for. The board browns out, the gate goes dead, or the opener “learns” its limits incorrectly. We replace with genuine Ghost Controls boards and, where the install allows, improve venting so the next board doesn’t cook the same way.
- Battery-backup collapse after a cold snap or cloudy stretch. Ghost Controls solar and battery-backup swing kits are popular on Colleyville’s larger lots, but a run of hazy days or a hard freeze kills the battery’s ability to hold charge. The gate opens once and stalls. The solar panel is fine; the battery isn’t. We test under load, not just open-circuit voltage, and swap in a battery that actually holds.
- Limit-switch and arm-bracket drift on swing kits. Expanded clay soil shifts a post half an inch, the arm geometry changes, and the opener reverses mid-travel or slams. This is the most common Ghost Controls problem in Colleyville, and it’s rarely the motor. It’s alignment.
- Accessory faults at the keypad and intercom. After a thunderstorm, we see fried wireless keypads and remote receivers. The iron rusts at the weld, moisture wicks into the conduit, and the wiring corrodes. We trace the fault, replace the accessory, and seal the entry point so it doesn’t happen again next spring.
- Hinge and post fatigue on heavy ornamental gates. Colleyville’s ornamental iron gates are heavy, and the hinges and posts take the full load every cycle. When a hinge sags or a post shifts, the Ghost Controls opener fights the extra resistance and trips. We repair the hinge geometry and post mounting before touching the operator.
Ghost Controls Service in Colleyville: What Local Conditions Mean for Your Equipment
Here’s the thing about Colleyville that you won’t read on a generic gate-repair page: Ghost Controls swing operators here very often sit on heavy masonry-and-iron pillars rather than wood posts. When the expansive clay under Colleyville shifts – and it does, every dry summer, then every wet spring – that pillar moves first. The opener’s arm geometry goes out before the motor ever fails. So the fix is realignment and post work, not a new control board. We’ve done this exact repair on the estate corridor off West McDonwell School Road and throughout the 76034 ZIP, and we also handle Ghost Controls in Bedford. Brent’s crew was called out to a heavy-duty single swing kit where the gate would open partway and reverse. The homeowner had already replaced the battery. We found the clay had heaved the iron pier enough to throw off the arm mount and trip the limits. We reset the post, re-hung the arm bracket, and re-learned the travel. The gate has run clean since. The battery was never the problem. That’s the difference between a Ghost Controls specialist and a handyman with a multimeter.
Ghost Controls Models & Products We Service in Colleyville
We work on the full Ghost Controls residential lineup: the Heavy-Duty Single Swing (TDS series) DIY slide/swing kits, the Architectural Series swing openers, the solar and battery-backup swing gate kits, and the accessory kits – AXDP, AXAM, wireless keypads, remote receivers. When the part is the weak link, we install genuine Ghost Controls control boards, arms, batteries, and accessories. When a site problem like shifting clay or rusted ironwork means an OEM bracket won’t hold up, we use quality aftermarket hardware that’s actually built for the conditions. On an operator that’s had water intrusion or a burned board at a masonry pillar, we’ll tell you straight when a rebuild won’t last and a full motor replacement is the smarter spend. We don’t default to replacements, and we don’t nurse along a dead board to pad a bill.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Colleyville
What you’ll pay depends on what’s actually wrong, and we quote the full price before any work starts. As a benchmark, most Ghost Controls repairs in Colleyville land in these ranges:
- Diagnostic visit: $75 – $150, credited toward the repair if you proceed.
- Battery replacement (solar/backup kits): $120 – $280 installed.
- Control board replacement: $250 – $520 including the part.
- Arm realignment / limit re-learn: $140 – $240.
- Full operator replacement (motor, arm, board): $700 – $1,400 depending on model and access.
Every estimate is free, and the number you approve is the number you pay. Call (866) 321-6117 for an exact quote on your Ghost Controls system in Colleyville.
Serving Colleyville, TX — Our Local Coverage Area
We’re based in the Colleyville area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Colleyville
Probably not. That’s the classic symptom of arm geometry drift from a shifted post, and it’s the most common Ghost Controls issue we see in Colleyville, though we also provide Hurst Ghost Controls service. Before any board replacement, we check the post alignment, the arm bracket, and the limit settings. If the board is still learning limits correctly, the fix is realignment and a re-learn cycle, and the board never gets touched. Call (866) 321-6117 and we’ll tell you which it is – estimates are free.
Because cold weather and hazy stretches kill the battery’s capacity. Ghost Controls solar and battery-backup kits rely on a sealed lead-acid or lithium battery to store charge, and after a hard freeze the battery won’t hold enough to complete a full open-close cycle. The panel is fine; the battery is spent. We load-test the battery on site and replace it if it fails. Call (866) 321-6117 for battery service in Colleyville or Ghost Controls repair in Euless.
The keypad itself can, but the wiring behind it often can’t. We see thunderstorm surge damage on wireless keypads and remote receivers in Colleyville regularly, and the bigger issue is moisture wicking through rusted iron at the pillar, into the conduit, and corroding the low-voltage wiring. We replace the damaged accessory, then seal the entry point so the next storm doesn’t repeat the problem. Call (866) 321-6117 – free estimates.
You repair the post and re-mount the arm, not replace the gate. Colleyville’s HOA design standards mean the ornamental ironwork usually has to stay, so we reset the masonry or steel post, re-hang the arm bracket to match the original mounting points, and re-learn the travel limits. The gate stays original. The opener works again. Call (866) 321-6117 for a quote.
Usually worth repairing. If the motor spins freely, the board responds, and the arm geometry is intact, a $150 – $500 repair is the better spend. If the board has been wet, the motor bearings are shot, and the arm mount is original from the 1990s, a full operator replacement at $700 – $1,400 is the honest call. We’ll show you the condition before recommending anything. Call (866) 321-6117 – the estimate is free.
Service Areas Near Colleyville
Beyond Colleyville, we run Ghost Controls service across the south Dallas area: Colleyville service area, Ghost Controls service in Richland Hills, Ghost Controls service in Travis Ranch, plus DeSoto, Duncanville, Cedar Hill, Glenn Heights, and Ovilla. If you have a Ghost Controls gate and you’re within 30 minutes of Colleyville, we’ll come out.
Book Your Ghost Controls Service in Colleyville Today
If your Ghost Controls gate is stalling, slamming, or dead at the pillar, call (866) 321-6117. We’ll schedule a visit, diagnose the actual fault, and quote the repair before any work starts. Same-day service is available for urgent gate failures in Colleyville. Free estimates, every job.
Written by Brent Calloway, Owner at Bastion Gate Repair, serving Colleyville since 2008.