Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Crandall
Gate repair in Crandall usually means one of two things: a long driveway gate on an acreage tract that’s dragging the ground, or a builder-grade automatic gate in a newer subdivision that’s lost its alignment. Either way, we fix it. Bastion Gate Repair sends a truck to Crandall from our DeSoto shop, and on most calls we’re able to diagnose and repair the same visit. If your gate won’t open, won’t close, sags on its hinges, or trips its safety sensor every time the wind blows, call (866) 321-6117 and we’ll get it sorted.
Why Bastion Gate Repair Is Crandall’s Preferred Gate Repair Company
We work on the gates that most general handymen won’t touch. Crandall has a specific mix of properties: five-acre horse properties where the gate is a pipe-and-wire pasture entrance, and brand-new subdivisions where the gate is an ornamental aluminum panel with a LiftMaster opener bolted to it. Both need different tooling, different parts, and a different approach. Our techs carry parts for both on the truck.
Brent Calloway built Bastion Gate Repair around the idea that a gate problem is a security problem first. A driveway gate that doesn’t close isn’t a cosmetic issue, it’s an open perimeter. That’s the standard we bring to every Crandall job, whether it’s a $250 hinge repair or a full solar operator replacement on a ranch entrance off FM 148.
We’re equipped for the full lifecycle: repair what’s broken, restore what’s failing, and install new systems when repair stops making sense. You don’t need a welder, an electrician, and a fence company. One call covers it.
Styles & brands we work with
Metal Gate Repair in Crandall
Metal Gate Repair in Crandall is the bulk of what we do on the acreage tracts and ranch properties around town. These are typically pipe-frame or tube-steel gates, ten to sixteen feet wide, hung on posts set in the blackland clay that makes up most of Kaufman County. The gate itself can be solid, but the post footings here are the weak point. Clay swells when wet and shrinks when dry, and after a wet winter a post that was plumb in October can lean four inches by March.
Repairing a metal gate in Crandall means more than swapping hinges. We pull the post, re-set the footing deeper, re-plumb it, and then address the gate panel itself: weld cracks, replace hinge barrels, add sag correction, and re-hang the gate so it swings clean. A typical metal gate repair on a Crandall acreage property runs $250 to $650, depending on whether we’re re-setting one post or two and whether welding is required. A full post pull and re-set on a heavy ranch gate can go higher.
Rural Gate Post Re-Set and Re-Plumb
Crandall’s soil is the variable most homeowners don’t account for. On acreage tracts around Bud Stoy Road, Talty, and the FM 148 corridor, gate posts heave seasonally. If your gate dragged fine in August and scrapes the ground by spring, it’s rarely the hinges. It’s the post footings moving. We excavate, set deeper footings with concrete below the clay line, and re-hang the gate so it stays true through wet-dry cycles.
Weld and Rust Repair
Pipe gates on rural Crandall properties see decades of sun, cattle pressure, and mower strikes. Weld cracks at the hinge points are common. We grind, re-weld, and often add gussets so the repair outlasts the original. Rust-through on the bottom rail is another frequent call, especially on gates that sit low over grass or in seasonally damp areas.
Wood Gate Repair in Crandall
Wood Gate Repair in Crandall shows up most often on older ranch-style homes and manufactured-home properties, where a double-drive gate framed in cedar or pressure-treated pine has been in place since well before the recent building boom. The heat and humidity swings in North Texas rot post bases, split rail ends, and let gate frames rack until they won’t latch.
A typical wood gate repair around Crandall runs $180 to $500. That covers everything from replacing a rotted post base to rebuilding a gate leaf with new pickets and bracing. If the frame itself is sound and it’s just sag correction and hinge work, the cost stays on the lower end. If we’re replacing a post or rebuilding a leaf, it climbs.
Rotted Post and Hardware Replacement
Crandall’s hot summers bake the top of a post while the base sits in clay that holds water for days after a storm. That combination rots wood from the ground line down. We replace posts with pressure-treated lumber rated for ground contact, set the footing to handle the soil movement, and upgrade hinge hardware so the gate doesn’t tear the screws out of soft wood again.
Gate Frame Straightening and Re-Hanging
A wood gate that drags or won’t latch in Crandall is usually a frame racking problem, not a hinge problem. We square the frame, add a diagonal brace, re-hang, and adjust the latch so the gate closes solid after the work is done. This job goes faster when the gate is near the house; on long rural driveways we bring everything we need so we’re not making a second trip.
Trusted Brands We Service in Crandall
We service and install openers from LiftMaster, FAAC, BFT, Ghost Controls, Mighty Mule, DoorKing, Elite, Linear, and Viking. That matters in Crandall because the opener on a five-acre property off FM 148 is a completely different machine than the one on a quarter-acre lot in a new subdivision, and we handle both. Our trucks carry common control boards, remotes, photocells, and solar charge controllers, so we can usually complete a repair the first visit instead of ordering a part and coming back.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Crandall Homes
- Clay heave on gate posts: On acreage tracts around Crandall, post footings set in blackland clay move with the wet-dry cycle. A gate that cleared the ground in August drags by spring, and the fix is a re-set, not a hinge adjustment.
- Wind damage from spring storms: North Texas straight-line winds bend lighter gate frames and loosen hinge bolts on heavier pipe gates. We regularly replace bent top rails and add bracing after storm season.
- Undersized openers on wide farm gates: A basic residential opener can’t run a sixteen-foot pipe gate on a pasture entrance. We replace them with heavy-duty operators built for the load, often paired with solar power when the gate sits far from the meter.
- Solar opener failures: Crandall acreage gates often run on solar because trenching mains to the entrance costs thousands. Panels that get dusty, batteries that age out, and photocells that trip from tall grass are all routine fixes for us.
Pricing for Gate Repair in Crandall, TX
Gate repair pricing in Crandall depends on the scope, but here’s what you can expect. Metal gate repairs on rural properties run $250 to $650 for hinge replacement, sag correction, and welding. Post re-sets due to clay movement range $400 to $1,200 depending on gate size and how much concrete work is involved. Wood gate repairs run $180 to $500. Operator replacement, including solar, runs $900 to $3,000 for residential systems and more for commercial-grade equipment on wide ranch entrances. Every quote is given and agreed before work starts, and estimates are free. Call (866) 321-6117 for a specific number on your gate.
We Also Serve Cities Near Crandall
Our Gate Repair team covers Crandall and the surrounding areas, including Combine, Seagoville, Forney, and Travis Ranch. If you’re a few miles east on US 175 or just over the Kaufman County line, we’re already working in the area. See our Crandall page for full local coverage details.
Serving Crandall, TX — Our Local Coverage Area
We’re based in the Crandall area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Crandall
Usually not. What you’re describing is post heave from the blackland clay that dominates Crandall and the surrounding Kaufman County acreage. When the clay gets saturated, it swells and pushes the post footing upward and off-plumb. The gate hasn’t changed; the ground under it has. The correct fix is to pull the post, re-set the footing below the active clay line, and re-hang the gate. Hinge adjustment alone won’t hold because the post will keep moving. Call (866) 321-6117 and we’ll assess it on site.
Yes, and in Crandall it’s often the best move. Trenching mains power to a gate that sits 300 feet from the meter on a multi-acre tract can cost more than the gate opener itself. We install solar gate openers sized to the gate’s width and weight, with a panel, battery bank, and charge controller matched to North Texas sun hours. Ghost Controls, FAAC, and LiftMaster all make solar-capable systems we service and install. The key is sizing the panel and battery correctly for winter’s shorter charge windows.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule openers. On rural acreage gates around Crandall, Ghost Controls and Mighty Mule are common because they’re friendly to solar power and long runs. In the newer subdivisions, LiftMaster dominates. We diagnose the actual failure, whether it’s a control board, a bad photocell, or a stripped gear, rather than defaulting to a full replacement.
Commercial-grade operators, such as those from FAAC, BFT, and DoorKing, are rated for gates of 800 pounds and up depending on the model and duty cycle. A sixteen-foot pipe gate on a Crandall pasture entrance is well within the limits of the right operator, but it has to be the right one. The failure we see most often is a residential opener bolted to a gate it was never designed to move. We’ll spec the operator to the gate’s actual weight, width, and daily cycles, and tell you honestly if your existing unit can be repaired instead of replaced.
Start with the obvious: tall grass, weeds, or debris in the photobeam’s line of sight. On Crandall acreage, grass growth alone will trip a photocell that was fine a month ago. Then check that the photo eye and reflector haven’t shifted from their brackets. If those are clear and it still trips, the issue is usually wiring or the photocell itself, and that’s a repair call rather than a DIY fix. Safety sensors are there to prevent injury; a gate that reverses mid-cycle because a photocell is malfunctioning needs a real diagnosis. Call (866) 321-6117 and we’ll sort it out.
Written by Brent Calloway, Owner at Bastion Gate Repair, serving Crandall and the surrounding Kaufman County area.