Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Ovilla
Electric gate repair in Ovilla almost always comes down to two things: a gate that spans a long rural driveway, and a power system that has to work without city mains. Most calls we run here involve solar openers, buried low-voltage runs, and wide steel or iron entrance gates set in blackland clay soil that moves with every wet-dry cycle. When the ground shifts, the hinge post leans, the gate drags, and the operator stalls mid-travel. That’s the repair we fix more than any other in Ovilla, and it’s rarely solved by just swapping a board.
If your electric gate in Ovilla is sagging, binding, failing to open, or tripping a fault, call (866) 321-6117 for a free estimate. We serve all of 75154 and the FM and county road drives that run through and around Ovilla. Brent Calloway leads our Electric Gate Repair team, and we quote every job before any work begins.
Why Bastion Gate Repair Is Ovilla’s Preferred Electric Gate Repair Company
Ovilla is not a tract-home subdivision market. It’s acreage lots, long drives, and perimeter gates that do real work keeping people and livestock in or out. That changes how a gate failure gets diagnosed. Our technicians come to Ovilla expecting heavy-duty operators on wide swing gates, solar-charged battery systems, and posts set in expansive clay. We don’t start by selling a new panel. We start by checking what the soil did to the gate, and what the sun did to the low-voltage side.
We service nine major gate brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That brand coverage matters in Ovilla because we see everything from residential LiftMaster openers on custom homes to older commercial BFT and Viking units on ranch entrances. Property managers and HOA boards in and around Ovilla call us for the same reason: one call covers diagnosis, repair, and replacement scoping, residential or commercial.
Brent Calloway built the business around a security-first mindset. A gate that won’t close on a five-acre Ovilla property isn’t a nuisance. It’s an open perimeter. We treat electric gate failures with that urgency, and we quote the complete repair before touching a post or a wire.
Styles & brands we work with





Electric Gate Motor in Ovilla
Electric gate motor repair in Ovilla means working on a system that often pushes a wider, heavier gate than anything found in a Dallas suburb. Rural gate spans here run 12 to 20 feet and more, built in weld-up steel or heavy iron, and that load wears motors, gears, and control electronics faster than a standard residential opener. When a motor fails, the first question we ask is whether the gate itself is still plumb, because a shifted hinge post in Ovilla’s clay will overload a perfectly good motor within weeks.
Symptoms That Point to the Motor, Not the Gate
You hear the motor run but the gate won’t move. The operator hums, trips a fault, or starts and stops repeatedly. These usually point to a stripped gear, a failing capacitor, or a motor bound against a misaligned rack. On solar systems, a motor that runs slow or not at all may be a battery that can’t hold enough voltage to push a heavy gate to full travel.
What Motor Repair Costs in Ovilla
A typical electric gate motor repair in Ovilla runs $280 to $600 when the fix is component-level: limit switches, capacitor, gear, or wiring. A full motor or operator replacement on a wide acreage gate typically runs $900 to $1,800 installed, depending on duty cycle, gate weight, and whether we’re re-using solar or converting to a heavier-duty swing or slide operator. We always give the written number before we order parts or do any work.
Gate Access Control in Ovilla
Gate access control in Ovilla covers the systems that tell a gate who to let in: keypads, intercoms, remote controls, loop detectors, and cards or key fobs on commercial entrances. On Ovilla acreage properties, these components sit in open sun for years, and the heat and UV take a toll. Keypads crack, buttons fail, and wiring junctions corrode. The gate itself may be fine while the access side refuses to respond.
Keypad, Remote, and Loop Detector Repairs
Most residential keypad and remote issues in Ovilla are fixable without replacing the operator. We re-pair remotes, replace dead keypads, wire in new loop detectors, and clean or replace corroded terminals in junction boxes. We see many older properties out here with DIY-wired keypads and field splices that work until the ground gets wet, then fail intermittently. Those get corrected to a clean, weather-tight standard.
What Access Control Work Costs in Ovilla
Keypad replacement on an Ovilla gate runs $250 to $500 installed, including programming and weather sealing. A new loop detector or safety sensor set runs $180 to $350 per sensor position. Full access control upgrades with phone entry or card readers on commercial entrances start around $1,200 and go up based on the number of users and entry points. Every quote is written and agreed before we begin.
Trusted Brands We Service in Ovilla
We stock common control boards, receivers, and safety components for the brands Ovilla properties actually use, which means faster service for LiftMaster, FAAC, BFT, and Linear systems without waiting on a warehouse order. Our technicians are certified-familiar with nine major residential and commercial gate brands, including DoorKing, Viking, Elite, Ghost Controls, and Mighty Mule. When a LiftMaster operator on an Ovilla driveway gate fails, we can usually diagnose and repair it on the first visit. When it’s a commercial BFT or Viking unit, we bring the same brand-agnostic approach: repair when it makes sense, replace only when it doesn’t.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Ovilla Homes
- Heaving hinge posts after heavy spring rains. The blackland clay around Ovilla swells when wet and shrinks when dry, which pushes gate posts out of plumb and makes the gate drag or bind even though the operator and hinges were fine.
- Solar openers that won’t hold a charge. Long rural drives here often run on solar because mains power is impractical. Sun-baked batteries, degraded charge controllers, and corroded low-voltage runs are the most common solar failures we fix.
- Overloaded operators on DIY-widened farm gates. Many older Ovilla acreage gates were field-welded wider over the years, and the operator was never sized up to match. The rack slips, the motor overheats, and the gear strip starts.
- Intermittent keypad and remote failures. Open sun and unshaded entries cook keypad electronics over time. We see it constantly on county-road and FM-road entrances where there’s no tree cover to shade the access post.
Pricing for Electric Gate Repair in Ovilla, TX
Electric gate repair in Ovilla typically ranges from $200 for minor wiring, sensor, or remote fixes to $600 for motor, control board, or access component work. Post re-setting and re-plumbing, which is the true fix for many sagging Ovilla gates, runs $400 to $900 per post including concrete and re-alignment. Full operator replacement on wide rural gates runs $900 to $1,800, and that number reflects the heavier-duty equipment this market needs. We provide free estimates on every job and the final price is quoted and agreed before any work starts. Call (866) 321-6117 and we’ll tell you what your gate actually needs.
We Also Serve Cities Near Ovilla
Bastion Gate Repair works throughout southern Dallas County and northern Ellis County. In addition to Electric Gate Repair in Ovilla, our teams cover Oak Leaf, Red Oak, Glenn Heights, and Lancaster. If you’re on a multi-acre lot just outside Ovilla or managing a property in a neighboring community, the same repair and installation services apply.
Serving Ovilla, TX — Our Local Coverage Area
We’re based in the Ovilla area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Ovilla
Usually it’s the gate post, not the operator. Ovilla sits on blackland clay that swells when it gets wet, and that swell literally pushes the hinge post out of plumb, which makes the gate sag and drag. The fix is to re-set and re-plumb the post footing in concrete, then re-align the operator. Call (866) 321-6117 for an inspection and a written quote.
Yes. Solar-powered gate openers are a big part of our Ovilla work because so many drives here are 100 feet or more off an FM or county road with no practical mains run. We diagnose the panel, charge controller, battery bank, and low-voltage wiring as part of the gate repair, not as an add-on. Estimates are free.
Yes. We work on heavy-duty swing and slide operators sized for wide acreage and pasture gates, including commercial brands like BFT, Viking, DoorKing, and FAAC. We’ll check whether the operator was properly sized for the gate’s weight and width, and if it wasn’t, we’ll recommend the right replacement with an upfront price. Call (866) 321-6117 to schedule.
Yes, and we treat it as a safety priority. A non-working photocell means the gate can’t detect a vehicle, person, or animal in the path, and on Ovilla acreage properties with livestock and kids, that’s a real hazard. Sensor repair or replacement runs $180 to $350 per position, and we won’t leave a gate cycling without verified working safety edges. Call for a free estimate.
We repair LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, covering both residential openers and commercial duty units. Most parts are stocked locally so we can get your Ovilla gate running without a multi-day wait. Call (866) 321-6117 for same-week scheduling.
Written by Brent Calloway, Owner at Bastion Gate Repair, serving Ovilla and the surrounding acreage communities.