Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Hurst
When an electric gate stops working in Hurst, you need a specialist who understands both the operator electronics and the gate hardware itself. Most failures in Hurst’s 76053 and 76054 neighborhoods aren’t simple motor burnouts – they’re voltage drops on old circuits, hinge posts heaved out of plumb by black clay, and control boards fried by storm-season power surges. We diagnose the system, not just the symptom. Our technicians service residential driveway gates and commercial gate operators throughout Hurst, from the subdivisions off Precinct Line Road to the retail corridors along Airport Freeway. Call (866) 321-6117 when your gate stops cooperating – we’ll tell you what your system actually needs, not what’s easiest to sell.
Why Bastion Gate Repair Is Hurst’s Preferred Electric Gate Repair Company
Hurst homeowners and property managers call us because we work on virtually every major gate brand – including yours – and we don’t default to full replacements. Brent Calloway built Bastion Gate Repair around a brand-agnostic diagnostic approach: troubleshoot the actual problem, fix what’s broken, and leave the gate more reliable than we found it. That matters in Hurst, where many automated gates were retrofitted onto 20-40 year old manual gates that were never designed for electric operators. Our technicians have certified familiarity with LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – covering both residential and commercial-grade systems most shops won’t touch. We arrive in Hurst equipped to handle logic board failures, sensor alignment issues, loop detector problems, and mechanical binding – often in the same visit. One call covers it, from diagnosis to repair to full replacement if your system truly needs it.
We don’t promise response times we can’t hit, and we don’t pad repairs with parts you didn’t need. What Hurst customers get is a straight answer: repair or replace, and we’ll tell you what your system actually needs.
Styles & brands we work with
Commercial Gate Operator in Hurst
Commercial gate operators in Hurst have a harder job than residential openers. They cycle hundreds of times a day at apartments, office complexes, and industrial facilities along the 183 corridor, and they’re often paired with access control systems, keypads, and vehicle loop detectors that fail independently of the operator motor itself. When a commercial gate operator in Hurst goes down, it’s not an inconvenience – it’s a perimeter breach. We handle the full electric side: three-phase and single-phase operator wiring, safety photocell replacement, loop detector tuning, and control board diagnostics. We also service the brands Hurst property managers actually run: DoorKing, BFT, FAAC, and Elite commercial operators, plus LiftMaster and Viking on lighter-duty commercial installs.
Operator Diagnostics and Control Board Work
A commercial operator that intermittently reverses or fails to close usually points to a safety sensor problem or a failing control board rather than a dead motor. We test the full circuit before recommending replacement. On a recent Hurst commercial property, the issue was a cracked solder joint on an Elite control board from repeated surge events – a $180 repair instead of a $2,400 operator replacement.
Access Control Integration
Commercial gates in Hurst often pair with telephone entry systems, card readers, or keypad access. When the gate opens but the access system doesn’t recognize the input, the problem can be in either system. We troubleshoot both, so you’re not bouncing between an access control vendor and a gate company.
Gate Opener Repair in Hurst
Gate opener repair in Hurst usually comes down to one of three root causes: insufficient power delivery, mechanical binding from a heaved or sagging gate, or electrical damage from North Texas storms. The fix starts with testing the circuit, not swapping the motor. We check voltage at the operator under startup load, inspect the gate’s swing or slide path for hinge wear and post movement, and verify that safety sensors are aligned and functional. A typical gate opener repair in Hurst runs $180 to $420 depending on whether we’re replacing a capacitor and limit switch, rebuilding a control board connection, or replacing a burned transformer. If your opener is beyond repair, we’ll tell you honestly, quote a replacement, and install it correctly the first time.
Logic Board and Sensor Repairs
A gate that opens but won’t close usually means a misaligned photocell, a failed loop detector, or a control board issue. We replace photocells, re-tune loop detectors, and repair or replace logic boards on LiftMaster, Ghost Controls, and Viking residential openers – among others.
Retrofit Automation for Manual Gates
Many Hurst homes still have manual gates on original 1960s-1980s installs. Adding a solar or AC opener kit means drilling and mounting the operator arm, routing power where required, and installing safety edges the old gate never had. We quote the full job upfront, including any conduit or panel work, before any work starts.
Trusted Brands We Service in Hurst
We stock common replacement parts for the gate brands Hurst homeowners and commercial properties actually run – Viking swing and slide operators, Ghost Controls residential openers, DoorKing commercial systems, and Elite operators on gated communities. That means fewer return trips waiting on parts, and faster turnaround when your gate is down. Whether your system is a builder-grade LiftMaster that’s underperforming or a Ghost Controls retrofit that never quite worked right, our Electric Gate Repair team has the diagnostic tools and brand knowledge to fix it right.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Hurst Homes
- Voltage drop on retrofitted openers. Original 1980s manual gates in Hurst were rarely wired for electric operators, so startup draw on a busy circuit trips breakers or slowly kills control boards. We run dedicated circuits and proper gauge wire to fix it permanently.
- Heaved hinge posts from black clay movement. Hurst’s expansive clay soil swells and shrinks through the wet-dry cycle, tilting gate posts within a few seasons. The gate then sags, binds mid-swing, and burns out the operator motor even though the electronics are fine.
- Storm-damaged safety sensors. Hail and high winds in spring knock photocells out of alignment or crack older control boxes, leaving gates stuck open or reversing erratically. We realign or replace sensors and seal control enclosures against the next storm.
- Builder-grade operators on gates they can’t handle. Original LiftMaster and Linear openers installed on heavy wood or iron gates in older subdivisions fail early because they were undersized for the load. We tell you what your gate actually needs, not what the original builder specified.
Pricing for Electric Gate Repair in Hurst, TX
Electric gate repair in Hurst typically runs $180 to $420 for most opener and control board fixes. Photocell replacement runs $120 to $180 per pair. Gate opener motor replacement on a residential swing gate runs $350 to $650 depending on the operator brand and gate weight. Commercial gate operator work starts higher – most Hurst commercial repairs run $400 to $1,200 because of the heavier operators and access control components involved. What pushes cost up: older gates that need hinge and post work before the operator can function, insufficient power that requires a dedicated circuit, and access control integration. Our estimates are free, and we quote every job before any work starts. Call (866) 321-6117 for a specific number on your gate.
We Also Serve Cities Near Hurst
Bastion Gate Repair provides Electric Gate Repair in Hurst and we also cover the surrounding Mid-Cities: Bedford, Richland Hills, Colleyville, and Euless. If you manage a gated community or commercial property in any of these cities, the same technicians and the same brand coverage apply. One call covers the whole area map.
Serving Hurst, TX — Our Local Coverage Area
We’re based in the Hurst area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Hurst
Yes, in most cases we add an electric operator without tearing up the driveway. The work usually involves running a dedicated 120V line in conduit to a new post footing or installing a solar-powered operator kit where practical, then mounting the opener and safety photocells. A typical automation retrofit on a Hurst manual gate runs $900 to $1,600, including power work, operator, and safety edges. Call (866) 321-6117 for a free measure and written price.
Your gate keeps tripping the breaker because the operator is likely on a shared circuit that can’t handle the startup draw, or the gate itself is binding from a heaved post, which spikes the motor’s current demand. Hurst’s 1960s-1980s homes were built without dedicated gate circuits, so the operator shares a garage or exterior circuit that was never sized for it. The fix is usually a dedicated circuit and often some hinge or post correction. We diagnose the actual cause rather than throwing a bigger breaker at the problem.
It’s almost always the gate, not the operator. Black clay soil movement in Hurst heaves hinge posts out of plumb, and the gate starts sagging and binding mid-swing. The motor then overheats or trips its limit switch trying to push through the bind. The correct repair is to re-plumb the hinge post, replace worn hinges, and realign the gate – not replace the motor. Call (866) 321-6117 and we’ll tell you which one is actually failing.
Yes, we service commercial gate operators at Hurst apartments, office complexes, and industrial facilities along the 183 corridor and throughout 76053 and 76054. That includes DoorKing, BFT, FAAC, and Elite operators, plus access control wiring, loop detector tuning, and safety photocell replacement. Commercial gates are security infrastructure – we treat them that way. Estimates are free, and we quote every job before any work starts.
Yes. Spring hailstorms in Hurst crack keypad housings, short out wiring connections, and knock out the control board inputs they feed. We replace or repair the keypad, check the wiring run for water intrusion, and verify the opener still functions. A typical keypad replacement or repair runs $120 to $280 in Hurst. Call (866) 321-6117 and we’ll get your entry system working again.
Written by Brent Calloway, Owner at Bastion Gate Repair, serving Hurst and the Mid-Cities with electric gate repair, automation, and installation.